Colorado SS 10.05 at 135mph!! (LSX Swapped Colorado w/nitrous)
ColoradoSS runs 10.05, Chevy Colorado with an ls swap on the juice.
Chevy Colorado Long Travel Suspension kit
Chevy Colorado Long Travel Suspension kit from DYNASTY OFF ROAD INNOVATIONS. KIT SPECKS: Will fit a 2.5 c/o and a 2.5 smooth body or a 2.0 bypass. you can also fit a single 3.0 c/o. We now use heims in our new upper arms for added adjustment and strength. The kit pulls 18+" of travel (inner finder well modifications are required for 19-20" of travel) The kit includes: Fabricated spindles, upper and lower laser cut control arms. 6- heim joints w/ misalignment spacers 4- 1" uni-balls w/ misalignment spacers 2- Kartek 6" limiting straps w/ mounting tabs 2- 6061 billet aluminum tie rods 2- D.O.T stainless steel bradded brake lines 8- Delron pivot bushings w/ inner crush sleeves 8- grade 8 allen metric replacement hub bolts 8- grade 8 hex standard bolts w/ nuts and washers (for kit assembly) CALL: 951.660.1218 FOR PRICING AND AVAILABILITY.
2005 bagged out Chevy colorado. I read a few of your comments and i thought id give u guys a lil better description. So here it goes; FBSS layin frame on 22" milanni kool whips. The suspension is sittin on 2600s in the front and 2800s in the rear, all 450psi slam specialities HE series. Im runnin 1/2" airline through GC 450 extreame valves at 200psi with 2 viair 480c compressors on a 7 gallon tank. Its got tubular upper and lower control arms with 2" drop ball joints in the front. In the back, a monster tringulated four link with super pivots and its bagged on the bars. Hence the 2ft of lift in the back. The rearend has been cut dwn about 2" to get it to tuck the 2s. I built this in my dads garage with a grinder, a saw zaw, and a welder. Special thanx to my boys that put in the long hrs wid me. I love lowriders so if u got any questions email me firstname.lastname@example.org. I appreciate the comments and i kno haters gonna hate. Its ok u can hate on me:)
Colorado Speed - Running
This our Colorado Speed Project, and as you can see, it's almost done! We're just tuning it now. Get ready SEMA because here we come! Produced by JakeMedia http://jakemedia.ca