BMW k75 rebuild the zombie bike 2/?
I 've bought a parts bike : i don't like to dismantle a vehicle wich could
run if you add parts on it, because it's still a vehicle, that you make
disappear ,it's not a piece of scrap or a totaled one wich can't be saved.
i do it anyway because it better for it to run under my bum wich it was
i will give it a second life, like to a zombie wich wake up while it's
supposed to be a piece of dead meat.
i hadn't the title anyway lol.
it was cheap cheap....
BMW k75 rebuild 5/ Engine head check
Removal of the head and a look at the whole stuff.
Regular process before setting the bike on fire.
Maybe this thing will run the next decade if i'm lucky lol
The engine is good,there are 15 bars of compression.
Worth fixing it.
Music : Ronald Jenkees.
BMW Service - BMW K75 & K100 Valve Clearance Check
Checking the valve clearances on a 1985 K100RT. This applies to all K75
models (1986 ~ 1995), all K100 models (1985 ~ 1990) and is basically the
same for the 16 valve K1 (1989 ~ 1993), K100RS (1991-1992) and all K1100
models (1993 ~ 1997). Also applies to K1200RS & K1200LT. Clearances are
Intake .15 mm ~ .20 mm / Exhaust .25
mm ~ .30 mm -
BMW Service - BMW K100 'Spline Lube' Part 1 of 6
Make some popcorn, grab a Monster or a Red Bull and a six pack of beer...
this is going to be a lengthy journey. How to perform a spline lube on your
BMW K75 / K100. This is part 1 of 5 parts.
BMW Service - K75/K100 Pre-Buy Inspection
If you are considering the purchase of a K75 (1986 ~ 1995) or a K100 (1985
~ 1990) you need to perform this one simple task before you commit to
purchasing the bike. Failure to do so could cost you over $1000.
BMW k75 rebuild 1/?
I 've bought it and check it, overhaul what is needed to use it.
fuel injection in 1985 yet while it's in 2003 all the manufacturers started
to use it on motorcycles.....
L jetronic system that mean it's a Vane meter sensor
one throttle body and injector per cylinder
shut off injection when the throttle is closed under 2000 rpm
not very fast, handle great as i know (never tried yet...)
it needs to be freshened a bit to be "pretty"
it will be black i think, flat or satin.
dirty whore looking for most of the peoples,but clean enough for me ; )
BMW K100RS Autobahn
Video shot on the way home back to NL after a week traveling in the Swiss
and Austrian Alps and Dolomites with Pierre and Emiel.
The motorcycle is a K100 RS 4V from 1990.
Tyres uses are Bridgestone BT52.
also see http://youtu.be/ZuevAYeU_tw for the twisty stuff.
Music by Kraftwerk. Edited in Avid Studio 10.1
BMW Service - Para-Lever Rear Drive Removal & Installation
NOTE WRONG DATA: The ABS sensor specs stated in the video are WRONG for EVO
brake (power brake) bikes and only apply to ABS I and ABS II systems. Sorry
for the confusion - Please continue to read: How to remove the rear drive /
final drive / bevel drive from your R850R, R1100R, R1100RS, R1100RT,
R1100GS, R1100S, R1150R, R1150RT, R1150RS or R1150GS. WARNING: This
procedure is the same for K1, 1992 K100RS, K1100RS, K1100LT, K1200RS &
K1200LT but torque values will vary - CHECK YOUR CLYMER MANUAL CAREFULLY.