engine build

how an engine is built

More Videos...


Big Engines Starting Up
This video features Big Engine Start Up compilation If you wanna see some biggest engine sin the world watch this video and if you like the video hit the like button. We do NOT own the video materials and all credits belong to respectful owners. In case of copyright issues, please contact us immediately for further credits or clip delete. DISCLAIMER: Under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship, and research. Fair use is a use permitted by copyright statute that might otherwise be infringing." The materials are used for illustrative and exemplification reasons, also quoting in order to recombine elements to make a new work.





Cylinder Block Machining Video - Engine Building DVD
Buy the "Basic Engine Building" DVD http://store.boxwrench.net/Basic-Engine-Building-DVD_p_8.html Basic Engine Building DVD - Chapter 25: Cylinder Block By this time your block is disassembled and in the machine shop. One of the most informative sections, here we take you behind the scenes to show what goes on while your away. We show the process of align honing the main bearing bore that is needed before anything else can be machined. Then the block deck is leveled and machined as needed for the new head gaskets to seat properly. And finally the cylinder walls are bored out just shy of their new size, which will be achieved when they're honed. BoxWrench.net is a community and resource designed for automotive enthusiasts. The Basic Engine Building DVD is over three hours of engine building that covers everything from removal and disassembly to final assembly and engine start-up. This is the ultimate DVD for any home mechanic or engine enthusiast that wants to see a complete rebuild from Teardown to Start-Up. This video can be used to learn how to work on almost any type of internal combustion engine including V8, V6, Straight 8, in-line 6 and even 4 cylinder engines. All of the interactive features and menus will not work over YouTube. This video is great for people interested in car repair, car care, and restoration. As well as hot rods, muscle cars, performance parts, and Boosting horsepower. It can also help you to gain knowledge for increasing fuel economy, how to lower your emissions, and covers preventative maintenance to avoid little things like overheating. Get the full DVD with all of the interactive menus, Tools section and engine Glossary terms here... http://www.boxwrench.net Educating the Automotive Enthusiast! Don't forget our Holley Installation & Tuning DVD. Sample clips on our youtube page and at our store here... http://store.boxwrench.net/Holley-Install-Tuning-DVD_p_12.html BoxWrench on Facebook: http://www.facebook.com/boxwrench





Micro Turboprop Engine Prototype Test
Don't Forget To - LIKE | SUBSCRIBE | SHARE This is my air driven prototype micro turboprop engine that i made using methods from my tiny model jet engine. It has a free turbine wheel which means, air is fed in the inlet, passes the guide vanes and hits the turbine wheel which in turn spins the shaft that is connected to. Then, with a 12:1 gear ratio the power is transmitted to to a propeller (108mm x 68mm). For its size i think it's quite powerful, but i don't know if it could fly a small rc plane. Maybe if i could increase the air pressure for example at 50 or 60 psi it would probably be able to lift a micro rc plane. The reason i didn't do it was due to the fact that i wasn't sure if the bearings could withstand that much stress ...Also, this engine could be used as a micro turboshaft engine for a micro sized hepicopter, as it has really good torque. The only limiting factor i think is the air supply. It's difficult to make a reliable micro air tank that could fit to a micro sized aircraft, that is strong enough to withstand high pressure to power the engine for 3 or more minutes, and small enough to fit the aircraft. As you can see in the video the turbine wheel was spinning at 144,000 rpm which is pretty high and if i attempt to grab the shaft with my hand (if i remove the propeller of course) it's really hard to stop it which means it has some good torque. I will definitely connect it to an electric motor generator to see what kind of power it can produce. Also i will make an assemby video of this engine to show you how does it look like inside and out. Micro turboprop Engine: Overall length: 42mm Diameter: 11mm Shaft: stainless steel 2mm dia. Turbine wheel: Axial flow 8.5mm dia, made from stainless steel sheet Ball bearings: High speed hybrid ceramic bearings (2mmx5mmx2.5mm) Support my work!: https://www.patreon.com/Ioannis?ty=h Subscribe to my channel! https://www.youtube.com/user/johnnyq90 Follow me on Twitter! https://twitter.com/JohnnyQ90 Follow me on Google+ https://plus.google.com/u/0/b/104633881118655653159/104633881118655653159/p osts Audio file(s) provided by http://www.audiomicro.com





Connecting Rods Machine Shop Video-Engine Building DVD
Buy the "Basic Engine Building" DVD http://store.boxwrench.net/Basic-Engine-Building-DVD_p_8.html Basic Engine Building DVD - Chapter 27: Connecting Rods By now the connecting rods are ready for pistons. We recommend having the machine shop clean your old pistons for you, if you plan to reuse them. It's not fun at all by hand. Here we show you how they install the rod pins into the connecting rods to connect with the pistons. Then they will measure the pistons to determine the final bore size of the cylinder walls before they are honed. BoxWrench.net is a community and resource designed for automotive enthusiasts. The Basic Engine Building DVD is over three hours of engine building that covers everything from removal and disassembly to final assembly and engine start-up. This is the ultimate DVD for any home mechanic or engine enthusiast that wants to see a complete rebuild from Teardown to Start-Up. This video can be used to learn how to work on almost any type of internal combustion engine including V8, V6, Straight 8, in-line 6 and even 4 cylinder engines. All of the interactive features and menus will not work over YouTube. This video is great for people interested in car repair, car care, and restoration. As well as hot rods, muscle cars, performance parts, and Boosting horsepower. It can also help you to gain knowledge for increasing fuel economy, how to lower your emissions, and covers preventative maintenance to avoid little things like overheating. Get the full DVD with all of the interactive menus, Tools section and engine Glossary terms here... http://store.boxwrench.net/Basic-Engine-Building-DVD_p_8.html Don't forget our Holley Installation & Tuning DVD. Sample clips on our youtube page and at our store here... http://store.boxwrench.net/Holley-Install-Tuning-DVD_p_12.html New Transmission DVDs and a Differential Rebuilding DVD just added. http://www.boxwrench.net Educating the Automotive Enthusiast BoxWrench on Facebook: http://www.facebook.com/boxwrench




Follow