Kirkham University Aluminum Fender Dent Repair
Kirkham Motorsports University shows you how to fix a dent in your aluminum
car. The repair is completely invisible when finished--and we show you how
to do it. Come visit us at www.KirkhamMotorsports.com
How to shape auto body plastic filler to absolute perfect contour in only
seconds before the plastic filler even hardens. Perfect contour everytime.
You won't believe how easy it is. Follow these simple steps for perfect
repairs, large or small. Consistent results everytime!
Tips For Applying and Block Sanding Bondo
http://CollisionBlast.com - If you have been in a auto accident, then you
probably have damage to your car. If insurance is involved, then you will
be dealing with an auto claim and a body shop. From there, they will take
care of the repairs for you. However, if you are a DIY car enthusiast and
have a car that you are wanting to repair yourself, then you are doing to
need to know how to use Bondo. This video explains the steps that you will
need to take to prepare the metal, apply Bondo and block the body filler.
Once the body filler is finished out in 150 to 180 grit, it then ready for
the paint steps.
Also be sure to subscribe to this YouTube to stay tuned with upcoming
videos every Tuesday at
Learn how to adjust a spray gun by watching my spray gun adjustment
playlist at http://www.youtube.com/playlist?list=PL9D278D201EBFA3B6
Join me on Twitter at http://Twitter.com/DonnieSmith7
Join our Facebook page at http://Facebook.com/CollisionBlast
For free access to DIY auto body and paint training, please subscribe to
Collision Blast at http://CollisionBlast.com
Thanks for watching the my videos, and be a resources by sharing the links
to the videos with your friends on Facebook and Twitter.
VW Jetta Dent Repair - Beaufort, SC | Hilton Head, SC | Columbia, SC
On-Site Dent repair available at 803-602-2961. Demonstration of paintless
dent repair on a VW Jetta fender. We begin the process of removing the dent
with glue pulling the large dent and then we move to the more traditional
process of pushing the dent from behind the panel. This video will show
that the dents dont just pop out, but rather, proper dent removal takes
time and patience as they are meticulously massaged away.
This process shown in this video is the same process that is used in
repairing small dents such as hail damage. The cost of paintless dent
repair is usually a fraction of conventional body shop estimates.
Many people refer to the process of Paintless dent repair/removal as: dent
popper, dent wizard or dent doctor, but Dent Doc Express is the only name
you need to know!
Looking for no deductible body shop repairs? Dent Doc Express is less than
half the cost of traditional body shops. We are the Less expensive body
Mobile Services available in
Charleston, SC | Bluffton, SC | Beaufort, SC | Hilton Head, SC | Columbia,
SC | Lexington, SC | Irmo, SC | Blythewood, SC
Paintless Dent Repair Using a Heat Gun and a Can of Compressed Gas Duster
Can you repair dents in an automobile with a hair dryer and a can of
compressed air? Yes and no. It depends upon the location and severity of
the damage. But as I have demonstrated, with a heat gun, $9 worth of Endust
Duster, and about 15 minutes, you can achieve some remarkable results.
Read more at...
Responses to the most common criticisms:
Q. Why didn't you just push the dent out from behind?
A. This is a hybrid vehicle and there is A/C equipment for battery cooling
that is located between the sheet metal and the interior finish. The dent
was simply not accessible from the inside.
Q. Why didn't you just use a toilet plunger and pull the dent out?
A. That may have worked on the larger of the two dents, but the surface
area of the smaller dent would have made that impossible.
Q. This video and photos of the dents have been Photoshopped and faked!
A. Absolutely not. I will gladly attest that this video and the images of
the dent, before and after, have not been retouched. I also have a witness
who observed the process and would attest the same.
Q. "Tapping" the panel like you did in the video would have popped the dent
out without the heating and cooling.
A. My attempts to pop the dent out with persuasive tapping by hand and a
rubber mallet prior to the heating / cooling did not have any impact.
Q. This process didn't help, you can still see the dents!
A. Yes. if you look closely you can still see the smaller of the two dents.
However, the larger of the two is not distinguishable to the casual
observer. This process made a significant improvement to the appearance of
both dents. It is not a factory perfect repair, but this is not a valuable
vehicle either. I could not justify the expense of a professional body shop
for a vehicle that is seven years old and +150,000 miles. This process
provided a good alternative.