Drag Racing 1/4 Mile times 0-60 Dyno Fast Cars Muscle Cars

Pontiac 400 Dyno Run

Pontiac 400 Dyno Run, Built by Flash Auto & Speed Shop, 400 Pontiac


 


More Videos...


Pontiac 400 HO engine Dyno Test
This was a Dyno Run on my Pontiac Firebird 400 HO engine build and tested by Terry Walter Precision Engines. Pontiac 400 block +.030 Pontiac #16 Heads 2.11/1.77 Forged Piston dished to bring CR down to 9.2 comp XE262H Cam Holley Carb Cast Iron Intake Pontiac Long Branch Headers





Pontiac 462 engine with Tri-Power carb setup
Pontiac 462 w/Tri-Power Setup - Dyno Runs, Built by Flash Auto & Speed Shop.





1971 GTO 400 engine on dyno
Barry's GTO engine on the Dyno





1970 pontiac formula 400 on chassis dyno
1970 pontiac formula 400 "Pontiac powered" car made 323 hp and 400 tq. We found that he has ignition problems.





Proformance Unlimited's 69 Pontiac GTO 400 Crate Engine Dyno Run
Proformance Unlimiteds Pontiac 400 crate engine live engine run....all of our horsepower is Dyno tested and proven....visit us on the web at www.proformanceunlimited.com or contact us at 800-267-3940





1971 camaro with pontiac 400
1971 Camaro with pontiac 400 engine. Comp roller cam, roller, lifters and scorpion roller rockers. 5C heads ported and polished. TH400 with reverse manual valve body. Holley 800cfm double pumper with aluminum intake. This is my newer project that i recently redid the interior on. Leave comments or questions thanx.





Pontiac 400 Super Stock engine
Listen to the tin indian music.





Proformance Unlimited Pontiac 400 Motor Dyno Test
http://www.customcrateengines.com/index.php/400-pontiac-450hp.html Engine package specs: A seasoned 400 Pontiac block Bored And Honed With Deck Plate Mains Have Been Align Honed Block Has Been Decked Dura Bond Cam Bearings Installed Brass Freeze Plug And Oil Galley Kit Installed Block painted with 3 coats of high temp ceramic engine paint customers choice of color (have your engine custom painted to match your vehicle for an additional $300) A Precision Ground Micro Polished Cast Iron Crankshaft Clevite P Series Rod And Main Bearing Eagle I-beam Connecting Rods w/ARP rod bolts High Performance Pistons (Speed-Pro, Keith Black, SRP, Or Mahle) Performance Rings Hand Filed To Match Application New three piece true double roller timing set Comp Cams Custom Ground High Performance Street Camshaft With A Muscle Car Chop Set Of Tie-Bar Hydraulic Roller Lifters Edelbrock Performance Aluminum Cylinder Heads A Set Of High Performance Valve Springs And Retainers (To Match Camshaft) 7/16 Screw In Studs And Hardened Guide Plates ARP Head Bolts Manley Chrome Moly push rods Scorpion aluminum roller rockers Engine will be assembled with all new bolts High volume oil pump and screen Chrome oil pan Chrome dip stick and tube Timing cover A new valley pan Professional Products performance balancer Fel-pro performance gaskets The complete rotating assembly will be balanced Edelbrock Performer RPM intake manifold New chrome thermostat housing Edelbrock carburetor w/ electric choke New chrome air cleaner MSD Pro-Billet distributor MSD Blaster II coil and bracket MSD 6AL Ignition Control Box Auto-Lite spark plugs Custom fit Taylor 8mm ignition wires (color of choice black, red, blue, yellow, green, orange no extra charge) High flow water pump Chrome valve covers New chrome breather Fel-Pro Performance Gaskets Flex plate (for auto transmission) Engines are photo documented during the building process so you can see the quality of parts and workmanship that goes into your engine Each engine is tested, timing set and carburetor adjusted for optimum performance We video tape your live run engine and send you a copy





Pontiac Banshee A Longer Look
The Banshee was a vision for what the Firebird could become. Of course, this concept car could never be built exactly, too low on the road and it wouldn't pass the safety and crash tests, but it was exciting. It demonstrated that the problem with GM cars didn't sit on the designers' shoulders. They were more than capable of dreaming up engaging and fun vehicles that would set imaginations on fire.





Driving a 1963 Pontiac Catalina 389 Tri Power 4 Speed
We test drive an original 1963 Pontiac Catalina 389 Tri-Power 4 speed.





Pontiac GTO 400 Engine 1967 Dyno Session Motor Test
Completely built stock type Pontiac engine by bakersfieldcrateengine.com This engine made over 400 HP and 500 TQ All stock parts except for the internals





Final Dyno Run Ram Air III.avi
1969 Pontiac GTO Judge Ram Air III 400 cu.in., WS block, 48 heads. 5500 RPM Dyno pull!





PONTIAC - "The Super Duty Story" Part 1 of 3
Pontiac had an SD engine program in the late 50s early 60s, and later/briefly again in 1973/74 with the SD455. This video is regarding the FIRST Super Duty program.---In only a few years time during the late 50s early 60s, Pontiac MORE THAN DOUBLED their V8's horsepower output (described in this video), while using/keeping the same V8 engine block they used thru 1955-81. Even though the same block was kept, from 1955-62 the cubic inch displacement grew much larger than the initial 287 cuber it started as in 1955. It grew to a 317 347 370 389 and finally a 421 cuber in 1962. It eventually maxed out at 455 cubes in 1970. By 1970 ALL the other GM divisions were producing engines at 454 or 455 cubes (500 for Cadillac). PONTIAC WAS THE ONLY DIVISION still using the same block they used in the 1950s on engines that had a much smaller displacement -- 287 cubes. The 1955 287 displacement would remain the smallest displacement ever used in the Pontiac V8 block all the way until 1980/81 when a 265V8 was produced. Since less durability was required for the smaller displacement, the block was decked/butchered/lightened on the 265/301v8s of 1980/81. Prior to 1980 the block had never been decked/butchered/lightened. The 1980/81 265/301v8 blocks were about 200 pounds lighter than the 1955-79 blocks, and only 25 pounds heavier than a Buick 231V6.





cammed pontiac 400 magnaflow x pipe 1981 trans am
Old engine blew up in 150 miles, had it rebuilt. its a 400 pontiac .040 over comp XE 262 cam hedman headers and a 4 speed. pypes X pipe with magnaflow mufflers dumped at the axle.





Pontiac 455 Tri-Power, Initial Start & Tune.
Initial Start & Tune. Pontiac 455 w/Tri-Power Carb Setup. Iron Heads. Custom 2-Part paint. Custom M/T Valve Covers. Built by Flash Auto & Speed Shop.





Which car is faster? Which Car is Faster?




Similar 1/4 mile timeslips to browse:

1979 Plymouth Arrow : 8.630 @ 149.800
George Monahan, Engine: 440 Mopar, Tires: Hoosier 33.5X17X15


2011 Harley-Davidson Touring FLTRX: 12.542 @ 105.990
Greg Bourdon, Engine: 103,


2008 Harley-Davidson Touring FLHRSE4: 12.687 @ 100.990
Ed Cooper, Engine: 110, Tires: Dunlop 402


2004 Harley-Davidson Touring flhtcse: 12.793 @ 100.810
john s mcneil, Engine: 103, Tires: stock


1998 Harley-Davidson Touring FLHT: 13.060 @ 103.580
Al Barrios, Engine: 1340 EVO, Tires: 140/16


1968 Dodge Monaco : 13.430 @ 109.000
Marti, Engine: 440+.030, Tires: 29x10 Mickey Thompson slicks


1966 Dodge Monaco 500: 14.990 @ 94.080
Dave, Engine: 383, Tires: 235 65R14


 


©2014 DragTimes - Disclaimer - Contact Us