Playing with my new Gopro Hero2. Its pretty awesome.
We tried to show off the shifter that was custom made but it is kinda hard to see. This is not my car, I was just going for a ride. The driver was tuning it for someone on pump gas. E85 tune was the previous day but he ran out, and its unavailable in town.
Datsun 510, Sr20det, MS engine management.
Here's another video showcasing the shifter:
And here's a review of the shifter:
Welcome to my 510 Heaven- VG30 style
This is a year in review of my car going to a few shows and autox events.
It also has my previous 510 which was semi parted out. I finally had some
time to put this together so I hope you enjoy. The 2 songs in the video
are F. Corsten and Ron Reeser Mix by Western Indian Girl.
UPDATE!! 1997 nissan s14 kouki sr20det build (part2) with dyno video!
*skip to 18:18 to see video of the car running
*skip to 24:53 for Dyno video
so after my last video the car ran good for about 2 weeks. long story
short, the tune that my last shop did set my motor up for detonation so
cylinder #1 dropped a significant amount of compression. the other 3 did as
well but not to such a degree.
it took me around 7-8 months to gather enough money to go with forged
internals rather than OEM.
i was on the verge of purchasing all the parts when i came across what i
thought was too good to be true.
someone in north carolina had a nice 1996 nissan 240se shell and fully
built block for sale. he was asking right around what it would of cost me
to rebuild my motor and considering i was getting a entire car and many
aftermarket parts with it, it was a no-brainer for me... I WAS SOLD!
here are SOME of the parts included with the 1996 240 shell:
-Freddy intake manifold/$140
FULLY ASSEMBLED BLOCK (BLUEPRINTED AND RACE BALANCED)
-9:1 forged cp pistons $470
-Brian crower 1200hp "I beam extreme" 19mm GT-R +625 ARP hardware/ $630
-ACL race rod and main bearings /$121.60
-nissan thrust washer /$12
-B&M short shifter/$200
-Megan turbo elbow/$55
-stock inj w/ fuel rail/$80
-Intercooler and piping/$140
-t25 stock turbo/$100
-sr20 stock maf/$45
-sr20det stock oil pan/$30
-winning specialties harness/$200
-stance rear upper control arms
-stance coilovers/ $1000
-greddy blow off valve
-turbosmart Boost controller
and some other stuff..
picked it all up and the rest was history.
car made some healthy numbers after everything was dialed in, the head will
get built next and them I'm gonna be going for 450hp so subscribe for
hope you enjoyed and thanks for watching
Dyno tuned by rolo at
CFT turbo in orlando
Datsun 1600 510 SR20DET Turbo AKA FIVETEN
Walkaround & Driving my Datsun 1600 AKA FIVETEN. Its a 1972 Aus Delivered
1600 and has been fittted with an S13 SR20DET Engine & Gearbox, GT28 BB turbo, Microtech ECU, Exhaust, FMIC and the usual bolt ons. Has fully
upgraded suspension, brakes (hilux 4 pot front and r31 rear) and a
reupholstered interior, recaro seats etc. Car is painted in Alfa Romeo flat
1971 Datsun 510 - Jay Leno's Garage
1971 Datsun 510. The Tonight Show's prop master Greg Elliot stops by with
his speedy ground-up restomod - a collector's car in the making and so much
fun to drive!
» Subscribe: http://bit.ly/JLGSubscribe
» Visit the Official Site: http://bit.ly/JLGOfficialSite
THE BEST OF JAY LENO'S GARAGE
» Exclusive First Looks: http://bit.ly/JLGExclusives
» Ultra Rare Supercars: http://bit.ly/JLGSupercars
» Jay's Book Club: http://bit.ly/JLGBookClub
JAY LENO'S GARAGE ON SOCIAL
Follow Jay: http://Twitter.com/LenosGarage
Like Jay: http://Facebook.com/JayLenosGarage
ABOUT JAY LENO'S GARAGE
A new video every Sunday! Visit Jay Leno's Garage, the Emmy-winning series
where Jay Leno gives car reviews, motorcycle reviews, compares cars, and
shares his passion and expertise on anything that rolls, explodes, and
makes noise. Classic cars, restomods, super cars like the McLaren P1,
sports cars like Porsche 918 Spyder and Camaro Z28, cafe racers, vintage
cars, and much, much more. Subscribe for more: http://full.sc/JD4OF8
NBC ON SOCIAL:
NBC YouTube: http://full.sc/MtLxIM
NBC Facebook: http://facebook.com/NBC
NBC Twitter: http://twitter.com/NBC
NBC Google+: https://plus.google.com/+NBC/posts
1971 Datsun 510 - Jay Leno's Garage
Jay Leno's Garage
Datsun 510 with Honda S2000 engine
Collection of pictures showing how a stock Datsun 510 got his swap from a
03 s2000 donor ;it takes almost the same time chopping the frame for either
other swap, so I felt more confortable swapping a s2k engine & tranny on
I didn't know where to start, but somehow everything started to taking
place in a house garage with some basic tool that my grampa left me.
Overall this could be called as frankestein swap because of the info and
parts used. Ei: Subaru R160 LSD, Nissan Maxima rear calipers with KYB AGX
Mitsubishi Eclipse adj shocks , front brakes and suspention provided by
Datsun 280zx shocks with eibach springs and Nissan 240sx camber plates
with tokiko adj shocks,Datsun 210 brake Booster with 280zx master cilinder, 04 S2000
motor/ tranny with a custom crossmember 50%honda 50% datsun driveshaft.
S2000 Cluster on 510 frame, old recaro front seats with Mitsubishi EvoVIII
rear seat. mix and match for the datsun / honda wireharness and fuse box ,
AEM standalone system.
Griffin Ford Mustang
radiator, with AN radiator hoses.... the list goes for the wiring , same as
the brake system and plumbing. It took me around 7-8 months to finish it ,
working mostly at night and weekdays.
The main issue was to keep the most of the original geometry of the
Datsun...and basically remained the same, only for the tranny tunnel wich
it was extended. custom header and Exhaust, muffler provided by Greddy RSX type S
muffler gave a low tone on the open pipe Exhaust. the car ran around last months of 08'
..still need some work as the interior carpet and sound system but
heeeey... who cares when you can rev 9k rpm's....!
datsun 510 driving up a hill
mild build street L20b with cam and R1 carbs on bogg bros manifold, ZX
gearbox and 3.89 gears.
Never went over 5900rpm. 2nd gear is too tall for this road.
Just a demonstration of how smooth the carburetors are without completely
dialing them in. Still could use a few minor adjustments.
Not meant to be 'fast ' or pushing the car to its limits, just having some
fun on a windy road.
update- lol my first downvote! Haters gonna hate. I'm not gonna slow down
I'm already going slow, grandma!
Nostalgic Hero - New Zealand Visit
A short film detailing the cars and people who were involved in the New
Zealand feature for the Japanese magazine Nostalgic Hero Classic Car.
A big thanks to Andy and all else involved for making it a successful
Datsun 510 SR20DET
Been a wile since my last video. Not long after I took the video I tore the
car apart and have been slowing collecting the parts I needed. It's a fully
built SR20. Hks cams and cam gears, cp forged pistons bored .5, cosworth
head gasket, 810cc injectors, 57trim .60ar T3 turbo, tial WG greddy BOV. Also put an R200 CLSD
in it to handle my projected 400whp.