Stock Floor Body Drop Chevy Colorado on 24's

S10 front clip stock floor body dropped to the rockers on 24 inch ICCE wheels.

More Videos...


08 Colorado laying out
My new suspension





GMC Canyon bagged
Bagged canyon





Chevrolet Colorado Prerunner Build - Raptor Offroad - Insane Project!!
Insane build project of a 2015 Chevy Colorado Prerunner. Specs: 2015 Chevrolet Colorado - 730hp Wegner Dry Sump LS7 with FAST intake - 4L80E trans - Currie Full floater rear with 9" - C&R Radiator - Full custom built Roadster Shop chassis and long travel suspension - 22" front and 27" rear travel - J-arm style front and 4-link style rear - 4130 front arms, spindles and trailing arms - Fox racing 2.5"dia coils and 3.5" series bypass with 2.5 bumpstops - Ultra 103 rims with 37x12.5R17 BF Goodrich Baja T/A KR - Wilwood 6 piston front and rear brakes RS says it took the “no comprises” statement seriously, and it shows. Gone is the original engine sitting under the hood and, instead, a dry-sump 7.0-liter LS7 V8 engine making 730 hp is powering this bad boy, paired to a 4L80E transmission. But, the concept doesn’t rely on the fact this is most likely the only LS7-powered Chevy Colorado in existence. The tuning shop has crafted a full-blown custom suspension for the 2015 Colorado Prerunner with 22-inch front and 27-inch rear travel, and a Curie Full floater nine-inch rear end. As if all of that custom work isn’t enough, the 2015 Colorado Prerunner benefits from 4130 front arms, spindles and trailing arms, Fox racing 2.5-inch diameter coils and 3.5-inch series bypass with 2.5-inch bump-stops and Wilwood six-piston front and rear brakes. Finally, a set of massive BF Goodrich Baja T/A KR tires provide the means to take the 2015 Colorado Prerunner anywhere. Truck was built by: Roadster Shop 28775 N. Rte 83 Mundelein, IL 60060





Sick Ride!
2005 bagged out Chevy colorado. I read a few of your comments and i thought id give u guys a lil better description. So here it goes; FBSS layin frame on 22" milanni kool whips. The suspension is sittin on 2600s in the front and 2800s in the rear, all 450psi slam specialities HE series. Im runnin 1/2" airline through GC 450 extreame valves at 200psi with 2 viair 480c compressors on a 7 gallon tank. Its got tubular upper and lower control arms with 2" drop ball joints in the front. In the back, a monster tringulated four link with super pivots and its bagged on the bars. Hence the 2ft of lift in the back. The rearend has been cut dwn about 2" to get it to tuck the 2s. I built this in my dads garage with a grinder, a saw zaw, and a welder. Special thanx to my boys that put in the long hrs wid me. I love lowriders so if u got any questions email me lowlife1038@yahoo.com. I appreciate the comments and i kno haters gonna hate. Its ok u can hate on me:)




Follow