Oldsmobile Alero Pacesetter Exhaust
The camera has crappy sound recording so to me it sounds like atari but I
did the best I could. Its a 3.4 V6 with a Cold Air Intake and modified PCM.
This baby's got some growl to it :)
Oldsmobile Alero can run in the 14's
Here's another video of my N/A Alero running in the high 14's at E-town.
The guys in the tower are having fun with me too! This happens when you've
been racing at the same track for a few years
2003 Mazda Front Wheel Bearing Replacement (Press In Type Bearing)
Wheel bearing replacement in a 2003 Mazda Protege 5. Press in style
bearings done without using a shop press. Specific for Mazda Protege, but
many of the techniques will apply to vehicles with pres-in-style wheel
It's a good idea to try to use the bearing-press-kit the way it was
intended. If the bearing doesn't budge, BE CAREFUL using a breaker bar. The
bolt supplied with the press-kit is not very strong...it with probably
shear off the head. Try to give the bearin a few hits with a sledge hammer
as seen in the vid..it will get the bearing moving. Then you can use the
press-kit, and it should finish pressing out the bearing.
Pressing in the bearing with the kit should be no problem.