2012 Ram with Magnaflow Sound Clip and Walk Around
My 2012 Ram QuadCab with 14" Magnaflow. Everything else in the Exhaust is stock including headers, cats, y pipe, and resonators. Other modifications include aftermarket speakers, tailgate light bar, truxport tonneau cover, and plastidipped wheels, Exhaust tips, emblems, and antenna. Filmed with GoPro2.
Loudest Dodge Ram On the Planet
Lifted 97 dodge on 35s. it has a 9 inch suspension lift. has the 5.9 with
straights and 5 inch tips. very loud. idk whats wrong with the sound...if
you run it at a lower quality it should work right...and no thats not a
dash cap and no you cant order one..its a county boy custom.
2010 Dodge Ram 5.7 Hemi - Stock Muffler vs Magnaflow 18" Comparison
Just a comparison video on all the scenarios I wanted to see when I was
researching mufflers. I hope this will help people who are in need of help
like I was.
The stock muffler was cut out and a Magnaflow 18" was stuck in its place.
Single exhuast with factory resonator still in place.
To be honest, I wish the muffler was louder. At Idle, you can barely hear
it, and at WOT it sounds a lot like the stock muffler. I think only the
city driving sound has improved, as it sounds really nice taking off from a
stop at about 1/4-1/2 throttle. One thing to not overlook is that it DOES
drone. The reason I went with Magnaflow after all was because everyone said
it does not drone. I would've gone with the Flowmaster if I had known
But I am very happy with it overall. I'll give it a few months to see how
much louder it gets, and see if there is any better performance or MPGs
from the swap. So far, I can't tell. Here is a link to the exact muffler I
AIRAID Intake For Dodge Ram 2009-2012 5.7L Install Video
AIRAID once again proves to be your one-stop source for performance air
intake systems with our MXP Series cold air intake for the 2009, 2010,
2011, 2012 Dodge Ram 1500, 2500! Best of all, this system nets 18
additional horsepower and 22-lb-ft of
The Ram's 5.7L Hemi engine is a proven and well-respected power plant, but
just like any engine it can benefit from cold, clean, and efficient air
charge. AIRAID's new MXP Series intake system includes a new roto-molded
air box that replaces the factory's restrictive design. Blade style
weatherstripping installed on the air box seals against the hood, keeping
hot engine compartment air away from the filter. A new Tri-lobe designed
roto-molded intake tube is also included to further promote airflow. This
system features a massive 1700cfm air filter that is available with either
oiled SynthaFlow® or non-oiled SynthaMax® material. Both filter styles
are washable and reusable. Stainless steel clamps and related hardware make
this one of the highest quality intake systems on the market today.
This system utilizes all of the OE attachment points and installs in
minutes using common hand tools. Like the rest of AIRAID's product line,
this new MXP Series intake system is backed by the company's "No Hassle"
Features include :
• +18 horsepower
• +22 LB/FT Torque Increase
• Tri-lobe Intake Tube
• No Tuning Required
• Easy Bolt-On Installation
P/N # 300-237 (Oiled) :
P/N # 301-237 (NON-Oiled) :
PlastiDip the Wheels
I saw a video of this and read about it on a few forums so I thought I
would try it as a cheap alternative to painted or powdercoated wheels. So
far I like it, but we will have to see if it holds up.
Magnaflow 18" Muffler on a Hemi
This is a 2011 Ram R/T with an aFe Stage 2. I removed the stock Y Pipe and
replaced it with a Magnaflow Y Pipe and I moved the Y Pipe all the way next
to the muffler. The muffler is an 18" one in and two out.