Kawasaki ZRX (2003) Dyno Run01 142hp 08/29/09

Metric Cycles Tulsa Dyno Day, 08/29/09. First of two pulls on my 2003 Kawasaki ZRX1200 resulting in 142hp with A/F slightly over 15. Mods to bike are Ross 12.5/1 pistons, Muzzy ZZR cams(pitted of course), deshrouded intake valves, K&N pod filters, Factory Pro jet kit running 135 main jets across/ needles at 3 and air screw 2-1/2 out along with a Kerker 4 into 1 megaphone Exhaust with 2" outlet and race baffle. Run was on Shell 91 octane gas with no octane Booster. Metric Cycles Tulsa is a full service shop capable of providing any service you need from tire mounting, oil changes to full motor rebuilds and race tuning. Friendly folks who are knowledgeable about motorcycles and will stand behind their work!

More Videos...


329HP ZRX Turbo Blowing-Through-FCR-Carbs Dyno Pull with Graphs Evolving to 472HP!!!
Dean's 1080cc ZRX with Stock Head and Cams...The bike Evolved over 16 months from this 329HP pull to an astounding 472HP!!! 222Ft.Lb. torq at the tire...





2015 KAWASAKI ZRX1200 DAEG
カワサキ ZRX1200ダエグ 水冷4ストローク並列4気筒 / DOHC 4バルブ1,164cm3 ボアスト:79.0mm × 59.4mm / 10.1:1 タイヤサイズ 前:120/70 ZR17M/C (58W) 後:180/55 ZR17M/C (73W)





Yamaha FZ1 (2007) Dyno Run 150hp 08/29/09
Metric Cycles Tulsa Dyno Day, 08/29/09. 150hp pull with mods to bike limited to Akrapovič Carbon Fiber slip-on, Ivan's Fuel Cutoff Eliminator(FCE) and Lars' initial airbox mod. This run was done without a Power Commander and A/F was slightly rich. Run was on Shell 91 octane pump gas with no additives. Metric Cycles Tulsa is a full service shop capable of providing any service you need from tire mounting, oil changes to full motor rebuilds and race tuning. Friendly folks who are knowledgeable about motorcycles and will stand behind their work!





TwinCam's ZRX 1100 R Dyno Run mit Akrapovic
Erster Probelauf und Abstimmung nach dem Umbau 2011 / 2012. Jetzt mit Akrapovic Hexagonal 350 mm Titan ohne DB Killer




Follow