Static X Motorsports - DYNO - FD3S 93 RX-7 GT40R Run 2
Static X Motorsports, Inc. Dynos a GT40R open turbo FD3S RX-7 on our AWD/2WD Dyno Dynamics Chassis Dyno! 504.5WHP and ~380WTQ @ 22PSI! Car runs the GT40R turbo, Huge FMIC, Huge Injectors, ect. Clutch was slipping, but with a new ACT clutch going in, expect to see more power soon! Check back for more Dyno and product videos!
Static X Motorsports, Inc.
9584B Madison BLVD
Madison AL 35758
We carry HALTECH Standalone ECUs, GARRETT turboCHARGERS, BRIDE SEATS, COBB TUNING, FORD RACING PRODUCTS, SCT TUNING, turboSMART, TEIN, GREDDY, TOMEI, AND MUCH MORE!
Nitrous LSx Mazda RX-7 vs E85 Big Turbo EVO on slicks!
EVO HAD CLUTCH ISSUES REMATCH COMING SOON!!
OutOfOrder EVO vs DNR Performance LSx RX-7
Shoutout to 3HeadedElephantS for the GoPro Footage! Checkout his channel
and subscribe, also watch his badass edit of this same race here:
Mad Mike RedBull RX7 - Spitting Flames - Team NZ Promo 2012
SUBSCRIBE FOR MORE!
Crank up the volume!! Enjoy unseen extended raw footage of Mad Mike in the
Quad-Rotor MadBull RX7, spitting flames with no Exhaust around Eastern Creek Raceway during the
victory burnouts at last year's Tectaloy International Drift Challenge!
SBPnz and Oversteer TV are again heading back to Australia with Team New
Zealand Drift as they take on the Aussies as well as Japan's Team Orange in
the Tectaloy International Drift Challenge at Sydney Motorsport Park
(Eastern Creek Raceway).
Subscribe to our Youtube channel and Facebook pages to keep up to date with
news and online coverage info as it comes to hand! Videos will be uploaded
daily to all our sites giving you a unique behind the scenes look into the
competition as well as presented coverage of the Top 16 competition!
Brought to you by NAC Insurance
Subscribe now to catch the action this August!
Yokohama World Time Attack
Video By SBPnz
Mazda Rx7 4-rotor race car. The making of a Defined Autoworks Beast. [Offical Video]
Never before seen footage showing the assembly/start-up of our custom
4-rotor. It is the first 4-rotor since the 787b to use triple spark plugs
per rotor. It is also the first since the 787 to feature telescoping intake
manifold. Custom made slide throttle body system. A world first however is
the use of a center main bearing and 4-piece eccentric shaft. Quick specs-
9.7:1 rotors, lightened and race clearanced. Race main bearings, and race
rotor bearings, ceramic NRS 2mm apex seals. Custom stationary gears, Full
custom Peripheral Port in each rotor housing (defined auto), Aluminum side
housings for reduced weight. Needle roller bearing in the center housing.
4- Piece eccentric shaft 0:47
Dynamic engine balancing 1:23
Variable length intake 2:20
Engine assembly 2:32
Rotor rotation 3:49
Slide throttle 4:00
4-rotor startup and idle 4:30
All footage and editing was done by Defined Autoworks. Music by Ivan
Contact us at 614-592-7991 we build any type of rotary powerplant to the
See the build thread here-
Loudest Mazda RX7 exhaust sounds in the world!
Loudest Mazda RX7 Exhaust sounds in
2002 Mazda RX7 FD3S Fujitsubo catback Exhaust
1985 FB Rx7 Chevy 350 (https://www.youtube.com/watch?v=cm08uKhqF9w) by
1989 Mazda RX-7 turbo II
Mazda RX7 (https://www.youtube.com/watch?v=DHQKrMP1r-M) by
Mazda rx7 fc3s s4 racing beat headers presilencer apexi Exhaust
Picture (thumbnail): by
400 Horsepower RX-7 in Tokyo
Met up with a guy who has a 400 hp RX-7 when it's running at low Boost. To ensure the longevity of the engine
he's running his T04 turbo at about
12psin (very low Boost). It has 2
apex seals on a bridge port motor. He gave a demo on the freeway and
showed what it can do.
The Zero F**ks Given RX7 - /TUNED
Would you drive a car built by a teenager in his parents driveway with no
safety features whatsoever? We did, and now we'll tell you why this ugly
RX7 is so brilliant.
GT40R Turbo Camry Video
Dynamotorsports's Built turbo Camry V6
Video is dated back from August 2006
392 WHP @ 16 PSI on 94 oct
468 WHP @ 20 PSI on 94 oct
520 WHP @ 26 PSI on 94 oct
12.6 @ 122 mph on street tires at 20 PSI of Boost