This is an 1835CC DP with the CB perf. offroad special cam. I purchased the DLI kit complete off a running drag bug for $1500, installed it on my engine and fired it up. I only ran it briefly since it is wicked overdriven, (18-20PSI Boost) and I can only run it on race fuel for $12/gal. Plus at the time I didn't have a way to tune it so I didn't want to mess up the engine. I have no idea what the timing and A/F are. I would estimate the HP at around 200 or so.
Awesome Vw Beetle 1303s
This is my 1973 beetle, it's a 1303s, it took 3 and a half years to restore
it, every single bolt was checked, original engine, full leather interior,
power steering, original ATS Cup rims, electric windows, LED lights, and
much more, check it out!!
Paul P 2275cc 189HP @ 6500 RPM
This engine is going to Island of Guam customer Paul P will really like the
power and torque of this weekend warrior beast, built by Anibal Chico of
Chico Performance in Arcadia,CA USA on the Dyno making 3 pulls 6000 RPM
then 5500 RPM and finally 6500 RPM runs like a beast and idle's like a
VW 1600 DUAL PORT ENGINE.SPECIAL
VW STROKER ENGINE .ALMOST READY TO FIRE THIS BABY UP... 78MM WITH 94MM
BARRELS AND 92MM PISTONS ...( turbo
THICK WALL) . I HAVE THE COMPRESSION DOWN TO 9:1 TO MAKE IT A DRIVER. ITS
DESIGNED TO HAVE 40 PSI AT IDLE WITH A HOT ENGINE WITH THE NEW DESIGNED 5/8
ROLLER BEARING RELIEF VALVE. THIS ENGINE ALSO HAS THRU BOLTED CENTER MAIN
SUPPORTS., AND A EXTRA LARGE DOG EAR THRUST WASHER FOR HEAVY CLUTCH USE..