Drag Racing 1/4 Mile times 0-60 Dyno Fast Cars Muscle Cars

426 Hemi .mov

426 Hemi. New stroker SRT8 platform. RLD CNC intake manifold and heads. Forged pistons and rotating assembly. Piston oilers in place. All Chrysler factory parts modified. Stock Chrysler parts include intake manifold, injectors, heads, valves, lifters, block, sheet metal, water pump and Exhaust manifolds. Custom aftermarket rotating assembly.


 


More Videos...


Mean 572 CI Chrysler Hemi. 615 HP. Nelson Racing Engines. NRE. Super Street. Charger.
Tom Nelson Dynos this great all aluminum Chrysler Hemi. Dual Carbs. Great sound. Go to http://nelsonracingengines.com. Also go to http://VeritasMovieStudio.com. See some of NRE engines in production at end of video. Very streetable motor.





Motor 5.7 Hemi Mopar Hot Parts
Video Motor 5.7 hemi mopar





'65 DODGE CORONET AFX 426 HEMI STARTUP at BYRON
John Grinwald heads toward the staging lanes to end the day of testing with a pass of 8.88 @ 150 mph





Original Factory 1965 426 Hemi running on a stand
Bob Tyler's original factory 426 Hemi running on a stand. Engine built by Dale Reed





1969 Charger R/T with a 426 Hemi engine
1969 Charger R/T with a 426 Hemi engine for sale at Francis Motor Sports Francis Motor Sports was lucky to acquire this 1969 Dodge Charger R/T Pro Touring car. It started its life with a 440 engine but now it has a 426 Hemi. With beautiful flawless custom paint in Pearl Hemi Orange this car is truly a showstopper! The Charger went through a Complete frame off rotisserie restoration about 4 years ago,and has only been driven 294 miles since it was finished. This is a true R/T car as indicated in the VIN. Equipped with a Dana Rear End with 410 Gears. Dual Edelbrock 625 LFM Carbs the rear has the electric choke. 10.25 to 1 compression ratio. The headlights are working but need to be opened manually http://francismotorsports.com/ https://www.facebook.com/pages/Francis-Motor-Sports/261109060581099 239) 313-5408





8.3L Whipple Blown 426 300 SRT8!!!
8.3L Whipple Blown 426 300 SRT8!!! Still alot of tuning to be done. Idle is set @ 1050.





9 second Charger SRT 426 Hemi w/Nitrous vs Supercharged Charger SRT 6.4 Liter Stroker
http://www.RoadTestTV.com Two modifed Dodge Chargers go head to head at the StreetCarDrags.com event held December 9, 2012 at Palm Beach International Raceway. The Charger in the lane closest to the camera has a 7.0 liter 426 Hemi with direct port Nitrous. The Charger in the far lane has a supercharged 6.4 liter Hemi stroker.





426 HEMI Engine First Startup
Finally started the Road Runner after 11 years of restoration. It took a while to fiqure out where the distributor should be but when we did, all was good.





2008 Dodge Charger 440 / 7.2L Hemi Stroker Exhaust Cutouts - Burnout
440 CI hemi stroker, forged 9.3:1 CR built for Boost...





Chrysler Hemi Monster! 1600 HP 572 TT Chrysler Hemi from Nelson Racing Engines. View in HD.
Check out this new NRE design. NRE's Tom Nelson explaind this new design and talks about what is in the pipe line at NRE and Nelson Supercars. More info and downloadable videos for your IPOD/PS3 at http://nelsonracingengines.com. Watch this cool video in HD. Also go to http://VeritasMovieStudio.com.





BLOWN 392 CHRYSLER HEMI ROARS
1958 BLOWN 392 CHRYSLER HEMI CAST IRON BLOCK, PORTED HEADS, ROLLER CAM, ADJUSTABLE ROCKERS, DONOVAN VALVE COVERS AND LOTS MORE GOODIES!!!!





Mopar 413 Max Wedge engine on test stand
63 413 Mopar big block engine with vintage Edelbrock STR-14 cross ram intake on the test stand. Going in a 63 Belvedere Max Wedge clone. Complete car is FOR SALE, $16,500.





Speed-O-Motive's '06 Customer Hemi Engine Dyno
Speed-O-Motive's 2006 customer's Hemi 496cid Big Block Chrysler.





Charger 426 Big Cam Idle
DRP's 426 Charger SRT8 Idles at BMC Performance





OLDSMOBILE 455 W-43 EXPERIMENTAL HEMI AND OTHER EXOTIC ENGINES - THE JOHN BELTZ YEARS PHOTO TRIBUTE
John Beltz was Oldsmobile's chief engineer in 1964 and one of the prime movers of the Toronado and 442 project. Beltz was promoted to Oldsmobile general manager at age 43 in 1969 when Harold N. Metzel retired. Beltz passed away in May of 1972 from cancer at the age of 46. John Beltz is leaning on a dual fan 455 Olds and posing with other experimental Olds engines that never saw production. Here are descriptions of these engines: 1. The 0W-43 all aluminum 455 with 4 valve per cylinders, four overhead cam Weber engine. With a redline of just under 8,500rpm it was originally conceived for CAN AM racing. At 3,000rpm it put out 300hp and at 6,000rpm registered over 600hp. The top output recorded for this engine in the Lansing Dyno facility was 700 real hp at 6,800rpm. Tests were run with both carbueration and fuel injection. The block was cast from Reynolds 356 alloy and fitted with pressed-in dry steel cylinder liners for the Forged-True 12.20to 1 pistons. Billet steel connecting rods by Carillo was used along with a forged steel crank. The engine weighed in at 50 pounds lighter than the production 455 motor! It was developed at the same time as the ZL-1 Chevy 427 motor. 2. The W-43 4 valve per cylinder 455 developed by JOHN BELTZ , LLOYD GILL , JOE JONES AND FRANK BALL. Rated at 500-550hp with a single Rochester Quadrajet on an aluminum manifold. Constructed with both cast iron heads and block and with aluminum-alloy block and heads 75 pounds lighter than the conventional 455 production engine. Engine featured four valves per cylinder with narrowed angles for a super efficient combustion chamber design, central spark plugs and could easily be adapted for chain for gear driven overhead camshafts. 455 engine had 4.625inch cylinder centers, a 4.125 bore and 4.250 stroke. Making use of the 3inch main bearings and 2.50 inch rod journals, the engine was fitted with a specially prepared cast crank fitted with SAE-1140 forged steel rods, forged 10.20-to-1 pistons which rode on Morraine 400 bearings. Four bolt main block boasted 2 additional 5/8inch drain holes. Four valve heads featured 1.750inch intake valves (SAE-8640 steel) with 22 degree stems and 1.375 Exhaust (214-N stainless steel) with 15 degree stems, special Stellite seats, bronze alloy guides, o ring plug tubes, 14mm spark plugs, 3/8 inch pushrods and aluminum rocker arms. (Of all the experimental Olds engines, this one came the closest to production and there are photos of this engine in street gear. MAY 71 HOT ROD MAGAZINE features some of these engines and the sadness of the Olds engineers of that time of how they would never be released.) 3. 455 dual turbocharged CAN AM ROCKET CHALLENGE. 659hp @ 6250rpm. 554lbs torque @ 6,250 rpm. Alloy block with 4 bolt mains. Forged steel crankshaft. Forged True pistons with 8.5 to 1 compression. 3inch main journals. 2.499inch rod journals. Carillo billet steel rods. alloy heads. 2inch intake valves. 1.625inch Exhaust valves. Crower roller camshaft with 555inch lift and 320 degrees duration. Dual TRW-375-E-10 turbochargers with Boost Wastegate 10and 1/2psi. Lucas fuel injection. Olds alloy intake. Competed with big block Chevy Mclarens and Porsche Panzers in CAN AM racing circa 68-69. This video is merely a couple of old magazine pages strung together with the exception of that blue 455 hemi which was found on the internet. Thats BRUCE MCLAREN in that green can am race car which is Olds powered. AT THE BEGINNING OF THE VIDEO JOHN BELTZ IS POSING WITH SOME ENGINES FEATURED IN THE JULY 1969 ISSUE OF HOT ROD MAGAZINE AND THE BLUE OLDSMOBILE 455 HEMI WAS FEATURED IN THE MAY 1971 ISSUE OF HOT ROD MAGAZINE. The incidental music I overlayed onto this video was muted by youtube.





Which car is faster? Which Car is Faster?




Similar 1/4 mile timeslips to browse:

1985 Pontiac Grand Prix : 8.890 @ 156.430
Paul, Engine: 511 BBC, Tires: m/t True 28x10.5


1997 Pontiac Grand Prix GT Twin Turbo: 9.011 @ 150.550
Matt, Turbos: T3/T61 Twin Turbos Tires: Mickey Thompson ET Drag tires 3053c


1972 Pontiac Grand Prix model J: 10.720 @ 124.300
david, Engine: pontiac, Tires: M/T 10.50x28x15


2000 Pontiac Grand Prix GTP PT04e67 Turbo: 11.094 @ 121.950
Chris Mercadante, Engine: 231 cu in L67, Turbos: PT04e67 Tires: Mickey Thompson


2004 Pontiac Grand Prix GTP CompG: 11.230 @ 120.800
James Honeychurch, Engine: stock L32 SC3.8L, Supercharger: Generation V M90(Stock) Turbos: no Tires: ET Drags


1998 Pontiac Grand Prix GTP: 11.245 @ 122.280
Greg Was, Engine: 3800 Series II, Supercharger: Stock Eaton M90 Gen V Turbos: None Tires: M/T


1986 Pontiac Grand Prix LS: 11.850 @ 115.860
Steve Emert, Engine: 460 Big Block Chevy, Tires: Hoosier 29/9.50/15


2002 Pontiac Grand Prix GTP: 11.984 @ 115.840
Steve Mayes, Engine: 3.8, Supercharger: M90


2005 Pontiac Grand Prix Base Cartuning turbo: 12.029 @ 115.380
Robin Paré, Engine: 3.8L V6 L26, Turbos: T62-1 Turbonetics(CT kit) Tires: Hoosier Quick Time Pro


2000 Pontiac Grand Prix GTP: 12.120 @ 112.161
Ryan Kuchenski, Engine: L67, Supercharger: eatom m90 port and polish Tires: hoosier quick time pro


1997 Pontiac Grand Prix : 12.133 @ 114.920
Winston Anderson, Engine: 3.8,


1998 Pontiac Grand Prix GTP: 12.260 @ 116.850
Michael Schwenk, Engine: Stock, Supercharger: None Turbos: Turbonetics T-70 Tires: 245/45R17 Nitto 555R


1997 Pontiac Grand Prix GTP: 12.300 @ 111.900
Chris metzger, Engine: L67, Supercharger: M90 Tires: QTP


2005 Nissan Titan SE Garrett GT 4094R Turbo: 12.394 @ 108.980
Christopher Jensen, Engine: 5.6L DOHC, Turbos: Garrett GT 4094R Tires: Hoosier QTP 28x16x11.50 slicks


1998 Pontiac Grand Prix GTP: 12.400 @ 117.000
Freeman, Engine: 3.8L, Turbos: T66 Tires: STREET TIRES


1986 Pontiac Grand Prix : 12.480 @ 107.000
Thomas, Engine: 350 chevy, Tires: 28


1986 Pontiac Grand Prix : 12.490 @ 106.000
tom baker, Engine: 60 over 350, Tires: mts


1997 Pontiac Grand Prix : 12.548 @ 104.340
Corey Finley, Engine: 3800, Supercharger: Stock Tires: Hoosier QTP


1997 Pontiac Grand Prix GTP: 12.570 @ 112.760
Chris Hinson, Engine: 3.8L L26, Supercharger: Gen V Eaton M90 Turbos: No Tires: Nexxen 2000


1998 Pontiac Grand Prix GTP: 12.575 @ 101.460
Rafael Santos, Engine: 3800 series 2 L36 bottom end, Supercharger: Ported M90


 


©2014 DragTimes - Disclaimer