LS1 Third Gen Camaro Z28 LS1 Swap Comp Cam
This is my 85 z28 with a LS1 in it. We just finished this car and this was after the first drive. This is before we tuned the car. This car has original paint and interior! This is a LS1 with 241 heads and LS6 intake. Cam: comp cam 275hr
1986 third gen Trans Am turbocharged 5.3 LM7 LSx runs
Couple WOT runs in my 1986 trans. Setup is a 2005 5.3 stock bottom end, 317 heads, LS6 cam and valvesprings, LS6 intake manifold, and custom fabbed turbo setup with a turbonetics 76mm ball bearing turebo. Currently running 5 PSI but engine will take 12-14 PSI. Car has a T56 tranny with a textralia clutch as well.
LSX Nitrous Camaro Third Gen Drag Radial 9.56 @141.24mph
1.33 60' on back tires 6.102 @ 113.58 1/8 9.56 @ 141.24 1/4 Zex perimeter plate jetted 74N/64F (200 shot) 93 octane pump gas mixed with vp110 91 Camaro .030 over 6.0lq4 370ci Forged rods and pistons Ls3 heads milled/ valve job hollow stem valves milled port matched to Vic jr intake 235/251 623/631 110+4 ls7 lifters stock rockers 850 profrm carb Th400 w brake 4500 Coan stall 8" Moser 9" 4.11 gears with spool Estimated weight 3300-3400lbs Hoosier 275 radials no thread