Slammed Dodge Srt4 | Brokelifestyle
Billy Kordecki's slammed dodge srt4. Car also has some engine mods and a
tune. Filmed and edited by Mitchell Hoffman.
2014 Dodge Durango R/T Revealed on the Road
( http://www.TFLcar.com ) 2014 Dodge Durango manufacturer B-Roll video.
The New Dodge Durango is being introduced at the 2013 New York Auto Show.
This video includes driving action video on the road of the new 2014 Dodge
Durango R/T. This Durango has refreshed exterior with new tail lights and
updated head lights.
96 neon crane 16s 10.5 compression all motor
this is my 96 neon, has rebuilt engine with crane 16's, wiseco 10.5
compression pistons, brand new crankshaft, all new bearings, all new top
end. this video was the 2nd start up after rebuilding the engine and was
with open header.
Dodge Neon - Front Wheel Bearing Replacement
Replacement of the front driver's side wheel bearing on a 2001 Dodge Neon.
This video Covers the following areas:
Removing the Caliper and Rotor
Removal of the Knuckle Assembly
Pressing out the Hub and Bearing from the knuckle assembly using an
The use of a Bearing Splitter
2014 RAM 1500 R/T In Depth Review and Road Test
2014 RAM 1500 R/T In Depth Overview and Road Test
Call us at 866 390 9277
A look at the all new 2014 RAM 1500 R/T Fast, powerful and stylish. In
stock at Fremont CDJR. Joe Langhans takes you on an in depth tour of this
Removal and Installation of a Coolant Bleeder Valve on a Dodge Stratus
Here is a quick video on how to remove and install a coolant bleeder valve
on a dodge stratus. You first will need to remove the upper radiator hose,
heater core hose, and reservoir hose, then remove the intake manifold with
10 mm sockets, finally remove the coolant bleeder valve, install then turn
car on and bleed the system by opening the bleeder valve to remove all air
from system while car is running, after there is a steady stream of coolant
coming from the valve, tighten the bleeder valve, and finally add coolant
back to the system until full. Check temperature gauge and you are done.
Remember if I can do it, you can do it! Do it yourself and save money.