650hp bridge 20b rx7 and 180hp 12a rx2 cruising on the way home from a car show at spanish banks in vancouver. part 2 **look in description for other videos**
**here are some other videos of this car that my brother uploaded on his channel.
1 with a 3rd gear pull
and another with a different 13b rx7
video taken on iphone 4 from my civic
Mazda Rx7 4-rotor race car. The making of a Defined Autoworks Beast. [Offical Video]
Never before seen footage showing the assembly/start-up of our custom
4-rotor. It is the first 4-rotor since the 787b to use triple spark plugs
per rotor. It is also the first since the 787 to feature telescoping intake
manifold. Custom made slide throttle body system. A world first however is
the use of a center main bearing and 4-piece eccentric shaft. Quick specs-
9.7:1 rotors, lightened and race clearanced. Race main bearings, and race
rotor bearings, ceramic NRS 2mm apex seals. Custom stationary gears, Full
custom Peripheral Port in each rotor housing (defined auto), Aluminum side
housings for reduced weight. Needle roller bearing in the center housing.
4- Piece eccentric shaft 0:47
Dynamic engine balancing 1:23
Variable length intake 2:20
Engine assembly 2:32
Rotor rotation 3:49
Slide throttle 4:00
4-rotor startup and idle 4:30
All footage and editing was done by Defined Autoworks. Music by Ivan
Contact us at 614-592-7991 we build any type of rotary powerplant to the
See the build thread here-
20B RX-7 vs GTR R35 - First run in RX-7
Drag race between brothers gets intense as Rob and Kevin duke it out on the
Rob recent purchased a 20b RX-7 and has never driven it on the strip. Will
he beat the 504 HP 2010 GTR?
Filming style courtesy of ABC's The Bachelorette. lol
20B rotary RX-7 Spirit R: The Ultimate Street Mazda
Built by Promaz Automotive, we think it's hard to go past Steve's wicked
Series 8 FD RX-7 if rotaries are your game. Limited to around 1500 unit's,
the Spirit R was the last of the RX-7's and featured a lot of upgraded
factory parts as well as a low 1100kg weight.
Now powered by a lethal Promaz triple rotor 20B extend port rotary engine,
power is aided by a Garrett GT42R turbo
and MicroTech fuel system and transmitted through an Albins 5-speed gearbox
and KAAZ rear end [ http://www.promaz.com.au ].
Part 12: 13B Rotary Engine Rebuild - My 76 Mazda RX-5 Cosmo Restoration
Just as I promised last episode, it is finally time to build the engine!
Part 12 of my RX-5 Cosmo restoration covers the entire process of building
the 6 port 13B Mazda rotary engine. While this engine is a hybrid of GSL-SE
RX-7 and Cosmo parts, the process is the same for any rotary from a 12A to
a 13B NA, 13B turbo, 13B-REW or any
other variant of the 13B. This video shows the whole process of the engine
build, starting from measuring the rotors and covering everything else
including clearancing the side seals, assembling the rotors, complete
assembly the short block, setting the eccentric shaft end play and
installing the front cover and everything underneath it. It's probably the
most complete engine build video outside of what you can buy from the
vendors, and as such, is an hour long. After this one, I'm going back to
videos under 20 minutes. But for now, grab a beverage of your choice, sit
back, and enjoy.
Low & Loud Purple AE86
Yet another video featuring one of Morocco's cars. This video shows off his
purple Toyota Corolla GTS on Work Meister S1 wheels. When he bought the car
it was in rough shape, but with a some time and money he quickly
transformed it into a show-worthy classic.
Song 1: https://soundcloud.com/mikedbeatsbyd/voltron-free-download
Kee did the burnout at the end.
6 Peoples Reactions to the CRAZY 900hp 3Dx Evo
We had a blast giving people rides in the Evo, even had a guest driver when
we gave Miss Thai Thai a ride after her photo shoot! See what people
thought about the car, caught a lot of people off guard.
TEXAS STREETS & TX2K13 Release now and shipping! http://www.1320video.com
Peter 20b 1st gen rx7
DDS presents the hard cut cracking 20b 1st gen that trindad loves, his Dyno day to tune his new
setup, did a interview and got a run down whats new, the final numbers
proved and made a record for the first engine in trinidad and tobago to
make that power on our local pump gas
WORLDS FASTEST AWD / 4G63 DATSUN / 20B RX7 IN TESTING
Willowbank Raceway held the 1st of the 2012 Top Sportman Series on the
weekend. Reece McGregor and the Heat Treatments Skyline thought it would be
a good chance to have some test runs in their worlds fastest RB26 powered
4wd skyline. The team worked hard all day and were rewarded with a final
pass or 7.64, not far off their 7.56 record, although something tells me
theres plenty more to come from this car again.
Another car using the test lane was Rob Novak in his Jett Racing 4G63
powered Datsun 1200. The team made adjustments through the day and saw a PB
7.35 @ 187mph on the second last pass of the night, the final wild pass on
video then saw a transmission failure but a happy team none the less.
Final team testing was the Direct Clutch/Promodz Rx7, the car is 3/4
chassis and a running 3rotor 20BT tweaked by Mazfix. The team recently made
adjustments in the rear and also in transmission and are starting to see
results, it ran a 7.99 @ 171mph through the day, then later in the night
suffered a leaking Boost pipe.
Owners Jerry and Dan tell me they havent even started to push the motor
yet, so another car with plenty more to come, and im sure that pb 7.80 will
soon be slashed.
These cars should all be running at the up and coming Sydney Jamboree at
WSID and by the looks of things have some unfinished business they want to
take care of :)
Mazda RX2 - Phillip Island Classic 2011
A very brisk Mazda RX2 Gp Nc Historic touring car with Jason Humble behind
the wheel. An awesome race with the ultimate comeback after making an error
on the 1st lap. Watch and enjoy. If you like to race a Historic racer go to
20B turbo Mazda RX-7 - Promaz
Charles' Promaz modified FD RX-7 racing for the first time. The car
features a second-hand import 20B triple rotary engine, Garrett GTX42R turbo on 12psi Boost, MicroTech LX12 computer running on
98-octane unleaded. The driveline is still factory RX-7 issue.
450hp FD RX-7 loud acceleration + BOV!
http://razzi.me/johnirvine for my high quality photos
http://www.facebook.com/IrvineBrothersPhotography - visit and "like" my
page for exotic and tuner photos
see my videos on http://supercars.tv/jirvine/