Montaje del Motor Renesis - Mazda RX-8 - NO REBUILD
Proceso de remontaje del motor Renesis de un Mazda RX-8. NO ES UN REBUILD
de Motor puesto que no se han cambiado ninguna junta de estanqueidad,
sellos de aceite o sellos de motor. Se ha limpiado todas las piezas y se
han reutilizado, con el propósito de practicar el montaje del motor y
almacenarlo de una manera mas compacta para en un futuro rehacerlo con
piezas destinadas a su uso en competición.
REPITO: NO REBUILD, el motor no funcionará puesto que no tiene juntas de
estanqueidad, es un video de propósito meramente instructivo.
Manual de Taller:
Mazda RX-3 13B Historic racecar - race 6 2013
Driver: Gust Van Haelst (B)
Race series: Belgian Historic Cup http://www.bravoracing.be/
Event: Menzo 24h of Circuit Zolder
Date: 31th of august 2013
race 1 result: finished 2nd in class and 9th overall from 46 entries.
race 2 result: finished 3rd in class and 10th overall from 42 entries.
More rotary action in this playlist on my channel.
Filmed with 2 different camera's:
Canon Legria HF M46
Canon EOS 7D + Røde Videomic Pro
Like my Facebook page
20B ROTARY ACTION! 20B DATSUN 1200 & 20B MAZDA RX3 - TNT 28/12/2013
On the final Test and tune at Willowbank Raceway for the year, Brad Mcilroy
was out testing his Mazfix prepped 20b Datsun 1200 ute as well as Russ in
his 20B powered Mazda Rx3. The PRODAT was testing some changes in the rear
end, keeping the newly added 10.5 inch tyres as well as some changes to the
4 link, and after a few tweaks had the car complete a full pass of 7.95 @
165 mph with a small back off down the deep end, a little slower then what
the car has run but a little more stable down the track. The Mazda Rx3 had
some issues most of the night but managed to get it down the track for an 8
second pass, also off its best, but once sorted should be back down to
where it was running before.
The Mazda Rotary Engine Part 1
Educational film by Toyo Kogyo about the Mazda Rotary Engine. Shows how the
Rotary engine works with comparisons to the Piston Engine. Also shows the
Mazda RX500 test vehicle on a banked circuit and the Mazda Cosmo Sport (or
110S). Originates from the late 60's.
Mazda Rx3 13B Bridgeport around the block
1974 Mazda Rx3 Sedan 13B Bridgeport taken for a drive around the block.
Nothing outrageous i.e. no burnouts, tokyo drifting, or other hoonology,
just boring old driving. If you watch the whole vid, it probably means you
miss your 'old' bridgie, or need to go and get yourself one.
Mazda Rx7 4-rotor race car. The making of a Defined Autoworks Beast. [Offical Video]
Never before seen footage showing the assembly/start-up of our custom
4-rotor. It is the first 4-rotor since the 787b to use triple spark plugs
per rotor. It is also the first since the 787 to feature telescoping intake
manifold. Custom made slide throttle body system. A world first however is
the use of a center main bearing and 4-piece eccentric shaft. Quick specs-
9.7:1 rotors, lightened and race clearanced. Race main bearings, and race
rotor bearings, ceramic NRS 2mm apex seals. Custom stationary gears, Full
custom Peripheral Port in each rotor housing (defined auto), Aluminum side
housings for reduced weight. Needle roller bearing in the center housing.
4- Piece eccentric shaft 0:47
Dynamic engine balancing 1:23
Variable length intake 2:20
Engine assembly 2:32
Rotor rotation 3:49
Slide throttle 4:00
4-rotor startup and idle 4:30
All footage and editing was done by Defined Autoworks. Music by Ivan
Contact us at 614-592-7991 we build any type of rotary powerplant to the
See the build thread here-