How To Install Replace Door Locks Chevy GMC Truck Silverado Sierra Yukon Tahoe Suburban - 1AAuto.com
helps you fix your broken power door locks with this helpful video. Follow along as we do everything from removing the door panel to testing the locks. This will help on many 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, and 98 Chevy GMC Pickup Trucks plus the 92 to 99 Tahoe, Yukon Suburban, Chevy Van, Vandura and more.
How To Install Replace Headlight Pontiac Grand Prix 97-03 1AAuto.com
1A Auto shows you how to repair, install, fix, change or replace the
broken, damaged, cracked, faded, cloudy, or chipped headlights. This video
is applicable to 97, 98, 99, 00, 01, 02, and 03 Pontiac Grand Prix models.
A novice can do it in about 15 minutes
New Headlights are available at
Tools needed: 10mm or adjustable wrench, philips screwdriver, needle nose
2007-2012 Yukon Denali Rear Door Lock Actuator Replacement
Rear door lock actuator replacement done on a 2009 GMC Yukon Denali. This
process should be identical for Silverado, Avalanche, Yukon, Escalade, and
Denali vehicles, years 2007 through 2012. I purchased via GM Parts Direct,
supply your VIN to verify your parts. The US made vs Mexico made vehicles
have different parts. I paid about $100 for each actuator, and the dealer
quoted near to $200. Dealer quoted 1.5 hours labor per door, it took me
about 25 minutes.
-T30 Torx Bit
-6 to 8 inch socket extension
-Needle Nose pliers
-Small flat head screwdriver
-Optional - plastic putty knife (for prying off door panel)
How to replace lock cylinders
www.dorkjocks.com presents "Mechanic Pete" In this video he shows you how
to replace lock cylinders on a 97 dodge ram 1500. He shows you the process
of taking the door panel off to replacing the lock cylinder.
Replacing the inside door handle on a Suburban for under $15
Here's how to replace the inside door handle found on many Chevrolet and
GMC SUVs and trucks. The video here shows replacing a 1999 Suburban's
I purchased the replacement handle in the video from Amazon for $13 with
free shipping. http://amzn.com/B000B68C08
You only need...
Two flat head screwdrivers
#12 1 in sheet metal screw
Drill with a 1/8 to 3/16 dill bit
Pliers (Long-nose would be best)
Hex head screwdriver or ratchet (for the two screws in the arm rest. some
models use Phillip heads instead.)
Disclaimer: All products used in this video were purchased by me and all
video content is my own and has been edited by me, Matthew Fox.
Headlight Lens Restore using Toothpaste!
CGHQ Website: http://www.classicgamershq.com
Headlight lens restoration using regular toothpaste is real. It doesn't
take much effort, but the type or brand of toothpaste does make a
difference. Watch to see the results i came up with.
Door Hinge Pin
As trucks get older the doors begin to get hard to close. Often times the
hinge pins are simply worn out. There not that hard to replace. The kit
is pretty cheap and there is a tool that doesn't cost much either. You can
try to get the spring back in place without the tool, but after you work
on it for an hour you'll wish you had the too.
2015 Chevrolet Tahoe Police Pursuit Vehicle | 2014 Chicago Auto Show | Autoblog
Autoblog West Coast Editor Michael Harley discusses the 2015 Chevrolet
Tahoe Police Pursuit Vehicle with Tahoe PPV Product Specialist Scott
VandeKerckhove at the 2014 Chicago Auto Show.
Subscribe to Autoblog Today: http://bit.ly/14aacFe
Watch More Autoblog Videos Here: http://goo.gl/mzYSN4
Autoblog obsessively covers the auto industry. We are a trusted source of
auto research, information, and automotive issues. Our love and passion for
everything auto can be seen at http://www.autoblog.com/, and in our
original series 'The List' (http://goo.gl/IlToX) Autoblog's video property
is a part of the AOL On Network.
Get more Autoblog
Read Autoblog: http://aol.it/VT9hsr
Like Autoblog: http://on.fb.me/13uhpVb
Follow Autoblog: http://twitter.com/therealautoblog
Chevrolet C/K truck mode and blend door actuator replacement
Here's a video covering a common repair issue on GM C/K series trucks.
If you are having problems with no heat, no cooling or air coming out from
the wrong place and you've confirmed that the control panel isn't burnt up,
then chances are you have a failed actuator.
Air door actuators are cheap and fairly easy to replace on these vehicles.
However, ensure that the control panel IS functioning and sending commands
to the suspect actuator before condemning it.
There are three actuators which do three different things, so make sure you
have identified which one is defective before buying a replacement.
1. Mode door: Mounted on end of case near driver's right foot. Controls
where airflow comes out at.
2. Blend door: Mounted on rear(tailgate side) of case roughly behind the
ashtray. Controls how hot or cold air is.
3. Recirculate door: Mounted on top of case, very hard to access. Controls
whether air is fresh or recirculated. Most people don't bother replacing
WARNING: DO NOT "TEST" ACTUATORS WITH THEM DETACHED FROM THE HVAC BOX!!!
THEY WILL OVERTRAVEL AND BE OUT OF INDEX AS YOU'LL SEE IN THE VIDEO. YOU
CANNOT REPAIR THIS EASILY, SO ALWAYS HAVE THE ACTUATOR MOUNTED TO THE BOX
BEFORE ANY KIND OF TESTING TAKES PLACE.
ALSO, INSPECT THE FLAPS THEMSELVES TO ENSURE THAT THEY ARE NOT HANGING UP.
AS WE ALL KNOW ANYTHING IS POSSIBLE WITH GM.