09 Challenger with Borla Exhaust
This is a 09 Challenger that we installed the customers Borla Exhaust kit. We have another customer with a 09
that is going to let us make our own 2 1/2 inch mandrel bent Exhaust system and we are going to jig it so we
will be able to make kits and ship them everywhere. I will post a video of
that system when it's finished.
2010 Challenger Exhaust Comparison
In this video, you will hear a 2010 Dodge Challenger R/T with the 5.7L Hemi
V8 with two different Exhaust systems
In the first part, it's the stock Exhaust with a Mopar Cold air Intake and
Diablosport Predator tune set to the Perf.91 CAI tune. Keep in mind, this
stock Exhaust is already past it's
break-in period of ~1500 miles, it was at about 2000 so it was fully broken
In the second part of this video you will hear the same car, with the same
intake and same Diablosport tune but with the following added:
JBA Short Tube Headers
JBA High Flow Mid-pipes (2.5" diameter)
Magnaflow Custom built Exhaust with NO
resonators (this is not one of the kits you buy directly, this was built by
the muffler shop I took it to using all Magnaflow pipes and such and cost
The new system sounds great. Has a pretty deep throaty rumble to it. There
is drone, but It's not terrible, I think in time I will actually get used
to it. The system could stand to be louder and have a little less drone,
but other than that, it's great. Added a pretty good amount of power as
well as you can almost always chirp the tires going into second gear now
where as before you could only do it on a lucky occasion.
It has a very clean sound and runs smooth. On the freeway the drone isn't
very bad at all, only when you start to accelerate and get it around 3000
I'll try to get an interior video soon!
Just wanted to add some more personal input now that we have had the system
on for a few weeks.
I mentioned the drone, yes, there is drone, wont deny it. BUT, it's not bad
at all. We have gone on a couple 1 1/2 to 2 1/2 hour cruises and it hasn't
bothered us at all. Freeway speeds it's fine, not very bothersome. The only
time it really gets to me at all, is a somewhat slow acceleration, the
first 2-3 gears can put some decent pressure on your ears. But it's easily
avoidable by accelerating slower or faster.
I mentioned that it could be louder. I may have been wrong! This thing is
pretty dang loud! In fact, we compared our system to a friends Corsa
Extreme system (also a 2010 automatic R/T). Guess what, OURS IS LOUDER THAN
THE CORSA EXTREME. At WOT, it's very close, and the Corsa may actually have
a bit more sound. BUT, at start-up, idle, and cruising, the Magnaflow IS
Sorry it's taking so long to get an Interior video, I haven't had to many
chances to get the car away from the old man long enough to bother grabbing
the video camera lol. But it WILL come... Eventually. haha
Any questions, feel free to ask.
2010 Challenger vs. 1970 Challenger
Inside Line put the 2010 Dodge Challenger in a head to head comparison with
a 1970 Hotchkis Challenger.
More Articles: http://www.insideline.com
Car Prices & Info: http://www.edmunds.com
Inside Line on Twitter: http://twitter.com/InsideLi...
Edmunds.com on Twitter: http://twitter.com/Edmunds
Facebook Page: http://www.facebook.com/ins...
Hi-Res Videos: http://www.hulu.com/edmunds-inside-line
2009 Dodge Challenger with Flowmaster Stainless 409S Exhaust Kit 817461
To view this product click below:
2009 Dodge Challengar RT with Flowmaster Stainless Force II system.
Application: 2009 to 2014 Dodge Challenger with a 5.7L Hemi engine.
For the person who is looking for a complete Cat-back dual Exhaust system with an quieter tone. With easy
fit in mind, these systems are mandrel bent for maximum performance and
include specially selected mufflers. Force II systems deliver a moderate
exterior tone and moderate to mild interior tone, and are suited to
customers looking for efficiency improvements without a lot of noise. Like
all Flowmaster systems, the benefits include improved throttle response,
power and mileage. Designed for an easy fit, these systems include all
necessary parts and hardware for easy installation.
✓ Mandrel bent 16 gauge 409 stainless tubing
✓ Moderate exterior Exhaust tone
✓ Includes hangers and hardware for easy installation
✓ Dyno tuned for
✓ Made in the USA
✓ Premium Flowmaster quality
Visit our website at www.FlowmasterMufflers.com