Drag Racing 1/4 Mile times 0-60 Dyno Fast Cars Muscle Cars

CrazyCarClub - EAGLE TALON MOTOR BLOW AND FIRE AT DAVIDSFARM

some more from May 24 weekend . tranny went so we killed our eagle talon and had a little fire


 


More Videos...


THE GREATEST MOTOR BLOW OF ALL TIME - HYUNDAI ACCENT
THIS HYUNDAI ACCENT WAS EXPECTED TO BE THE LEAST EXCITING CAR OF THE NIGHT.. BUT IT CERTAINLY WAS ONE OF THE BEST FIRE BALLS, LASTING A GOOD 28 MINUTES, MOST OF WHICH WAS CUT OUT FOR YOUR VIEWING PLEASURE, BUT IT WAS SURE NOT TO DISSAPPOINT





Police visit David's Farm
NOTICE: Dave of davidsfarm owns all rights to this video, NOT me! Dave, let me know if you have a problem with this video and I will take it down. It's on several other peoples channels to though.





Engine blow , 1995 geo 1 3 Davidsfarmison[bliptv]now
Engine blow , 1995 geo 1 3 Davidsfarmison[bliptv]now





The Best of the Cheviac @ Daves Farm
For all the Cheviac fans out there. Cause we all know its the best car on the farm.





part 2 with 175hp nos nitrous magna engine fail blow rally fun burnout fire
this is the v6 3.0 magna with 175hp of Nitrous being switched on and off , it only stopped due to the wiring melting





Engine Blow on a 1.4 306
we got a car to fix and it turned out that the engine block was cracked.





Davidsfarm 1427 - First Drive Repaired Eagle Talon With Bees
Davidsfarm 1427 - First Drive Repaired Eagle Talon With Bees





JORDAN TANNER SCREAMIN 2 2011 COMPILATION VIDEO
Interested in MADRAM11 T-Shirts Click HERE http://madram11productions.com/ Jordan Tanner is one heck of a driver and does an awesome job of piloting his ColeWorX buggy Screaming 2. This buggy features a 434 Small block, powerglide transmission, atlas transfer case and custom 14 bolt axles front and rear.





CrazyCarClub - DYNASTY MOTOR BLOW SMOKESHOW AT DAVIDSFARM
Attempting to finish off the Dynasty





MARS 5HP DIESEL ENGINE - 1st Start Up in 50 Years!
Watch as an early 1940's MARS Diesel engine is fired up after 50 years. Originally acquired from a cane farmer in Nambour, Queensland, Australia in the 1970's, this engine sat in careful custody with another three owners before finally retiring with me. MARS engines were made by the MARS Machine Tool Manufacturing Company in Brisbane, Australia and were preceded by the horizontal and vertical Rapson and Dutton engine, made by the same company under the Rapson and Dutton company name. MARS engines are not Lister clones. Mars engines are bigger, heavier and more robust than Lister engines. When you listen to a Lister and then to a MARS you will agree. This engine has a 3 " diameter crankshaft and not one component is interchangeable with a Lister. MARS engines were commonly used in industrial situations such as factories to power line shafts which powered a number of machines, a task Lister engines had some trouble with apparently with their crankshafts twisting under the load on start up, and why this company made the Mars Diesel. 5 HP MARS engines were painted Maroon colour as standard from the factory although there are variations of colour in existence. 8 HP engines were a different colour. This engine has not run since the original owner sold it in the early 1970's. Apparently it had not run for some years before that. The second owner sadly passed away before restoring it and it sat in a shed untouched with the third owner. Close friend and temporary fourth owner, Simon Devere, assisted actively in the mechanical restoration when I purchased it and assisted in the first start after its mechanical restoration. This man is a genius when it comes to diesel engines and he has the nickname "The Lister Whisperer" for good reason. Thanks "Slippery". This engine appears to have not done much work judging by its internals. Work to the engine includes new rings, liner/cylinder hone (the original factory liner had indiscernible wear in it), new valve guides made to original specs, new valves to original specs (original was bent and caused damage to the guide) , new big end Babbit bearing, new conrod bush, very light head machine to ensure true flatness, new internal oil pipes, new head gasket, new oil gaskets, new high pressure line, new welch plugs in the head and new oil pickup. There are still remnants of the original factory maroon paint on it that have survived the years of weathering out in the cane fields. Cosmetic restoration is planned shortly to bring it back to its original livery. It will be mated with a steel transporter to emphasise its industrial heritage and will be rallied with pride. Video of the finished engine on transporter will be posted when it is done. Enjoy and please share if you like. This is the only video of a Mars engine running to this date anywhere. Hope to see more. Cheers Phil





Killing The Micra ( Engine Blow )
We decided it was time for the engine in the micra to die.





try to crank a rusty engine.
NFG wdb108 280se merc. one last time for fun.





Awesome V12 Monster diesel engine Awake and Alive startup
Awesome V12 Monster diesel engine Awake and Alive startup The first V-type engine (a 2-cylinder vee twin) was built in 1889 by Daimler, to a design by Wilhelm Maybach. By 1903 V8 engines were being produced for motor boat racing by the Société Antoinette to designs by Léon Levavasseur, building on experience gained with in-line four-cylinder engines. In 1904, the Putney Motor Works completed a new V12 marine racing engine -- the first V12 engine produced for any purpose.[2] Known as the 'Craig-Dörwald' engine after Putney's founding partners, the engine mounted pairs of L-head cylinders at a 90 degree included angle on an aluminium crankcase, using the same cylinder pairs that powered the company's standard 2-cylinder car. A single camshaft mounted in the central vee operated the valves directly. As in many marine engines, the camshaft could be slid longitudinally to engage a second set of cams, giving valve timing that reversed the engine's rotation to achieve astern propulsion. "Starting is by pumping a charge into each cylinder and switching on the trembler coils. A sliding camshaft gave direct reversing. The camshaft has fluted webs and main bearings in graduated thickness from the largest at the flywheel end."[3] Displacing 1,119.9 cuin (18,352 cc) (bore and stroke of 4.875" x 5" (123.8 x 127 mm)), the engine weighed 950 pounds (430 kg) and developed 150 bhp (110 kW). Little is known of the engine's achievements in the 40-foot hull for which it was intended, while a scheme to use the engine to power heavy freight vehicles never came to fruition.[2] One V12 Dörwald marine engine was found still running in a Hong Kong junk in the late-1960s. Two more V12s appeared in the 1909-10 motor boat racing season. The Lamb Boat & Engine Company of Clinton, Iowa built a 1,558.6 cuin (25,541 cc (5.25" x 6" (133.4 x 152.4 mm)) engine for the company's 32-foot Lamb IV. It weighed in at 2,114 pounds (959 kg). No weight is known for the massive 3,463.6 cuin (56,758 cc) (7" x 7.5" (177.8 x 190.5 mm)) F-head engine built by the Orleans Motor Company. Output is quoted as "nearly 400 bhp (300 kW)". By 1914, when Panhard built two 2,356.2 cuin (38,611 cc) (5" x 10" (127 x 254 mm)) engines with four-valve cylinder heads the V12 was well established in motor boat racing.[2] In automobiles, V12 engines have not been common due to their complexity and cost. They are used almost exclusively in expensive sports and luxury cars because of their power, smoother operation and distinctive sound. ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ ▬▬ ★ MORE INTERESTING VIDEOS: http://www.youtube.com/watch?v=yrbwGmtZ8pM&list=UUYH8swcp71EHt-88lkaMDTQ ★ SUBSCRIBE: http://goo.gl/GynuUU ★ Follow my Twitter: https://twitter.com/GeorgeDominik1 ★ Thanks For Watching ★ ★ Post comment , share and tell us what u think ★ ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ ▬▬





2014 Cheap Truck Challenge! 93' S10 vs 95' Grand Cherokee vs 75' International - Dirt Every Day 32
What happens when you take three low buck trucks driven by cheap truck drivers on an off road shoot out? You get Cheap Truck Challenge. Put on by Petersen’s 4Wheel and Offroad Magazine, Cheap Truck Challenge is the annual low buck truck competition where Fred and his pals must buy and build a 4x4 for under $4000. On this Dirt Every Day Fred finally takes his Chevy S-10 to Reno, Nevada for a battle of the budget beater rigs! Dirt Every Day appears every fourth Thursday on the Motor Trend channel. http://www.youtube.com/motortrend Subscribe now to make sure you're in on all the action! http://www.youtube.com/subscription_center?add_user=motortrend Facebook - http://facebook.com/motortrendmag & https://www.facebook.com/DirtEveryDay Twitter - http://twitter.com/motortrend Google+ - https://plus.google.com/+motortrend/posts Website - http://www.motortrend.com & http://www.4wheeloffroad.com/





The RED DEMON - 8 Second Talon
The Boostin' Performance RED DEMON dominating the Gangster class at KOTS X... This car is NO JOKE, nearly 1000hp to the wheels and with low 8 second E/T's... it's no wonder it KILLED the game and finally represented the AWD cars at KOTS! Congrats on the win guys.




Which car is faster? Which Car is Faster?





Similar 1/4 mile timeslips to browse:

1992 Eagle Talon Tsi: 7.961 @ 171.100
Kevin Jewer, Engine: 2.0 4G63, Turbos: Forced Performance 99HTZ Tires: MT 29.5 x 10.5


1990 Eagle Talon tsi: 7.976 @ 179.060
john shepherd, Engine: 2.2L, Turbos: T4 Garret turbo built by Forced Performance Tires: Hoosier DOT 26X8X16


1991 Eagle Talon : 8.802 @ 155.900
Kevin Jewer, Engine: 4g63, Turbos: Borg Warner S475 & Garrett T3 50 Trim


1991 Eagle Talon Talon Tsi RWD: 8.960 @ 149.910
Scott Glassbrook, Engine: 2.3 liter 4g63, Turbos: GT4202 Tires: M/T


1991 Eagle Talon TSi Awd: 10.460 @ 137.800
Susio Ranna, Engine: 2.0L Mitsubishi 4g63, Turbos: ported/clipped 20g


91 Eagle Talon : 10.720 @ 131.020
John Shepherd, Turbos: 20g Tires: nitto


1991 Eagle Talon TSI AWD: 10.721 @ 138.080
Mike, Engine: 2.0L 4G63, Supercharger: N/A Turbos: Precision GT3582R Tires: 215-45-17 Goodyear Eagle F1 GS D3


1990 Eagle Talon TSi FWD: 10.727 @ 142.120
Rob McKellar, Engine: 4G63, Turbos: Precision 56


1991 Eagle Talon TSI AWD: 10.806 @ 133.150
Nate Burgess, Engine: 2.0, Turbos: T-3 61mm


1992 Eagle Talon TSI AWD: 10.846 @ 127.850
Loren Hill, Engine: 2.3l, Turbos: FP3065 Tires: 235/45-17


1995 Eagle Talon Tsi Awd: 10.970 @ 132.990
Philippe Sauve, Engine: 1g 6 bolt, Turbos: Borg Warner s362et Tires: MT Et Street Drag Radial 26in


1991 Eagle Talon TSI: 11.160 @ 129.000
Jacob Chamberlain, Engine: 2.4, Turbos: GTK 1000 Tires: 225/45/17 conti


1996 Eagle Talon tsi fwd: 11.171 @ 129.720
Eric Cavalieri, Engine: 2.0, Turbos: fp red


1992 Eagle Talon : 11.467 @ 121.460
Greg Clayton, Engine: 2.0, Turbos: 20G


1995 Eagle Talon TSi AWD: 11.554 @ 129.630
PrimedTsi, Engine: Magnus 2.4l, Turbos: T67/T3 Tires: Street Radials


1992 Eagle Talon AWD: 11.582 @ 116.990
Chris Tichy, Engine: 2.0, Turbos: Mitsubishi 16g Tires: Retreaded Race Compo


1991 Eagle Talon : 11.700 @ 123.300
mohamed taheri(driver) sean robb(new owner), Engine: 2 liter w/ slight over bore, Turbos: 20g ported Tires: crappy ass


1990 Eagle Talon : 11.790 @ 116.970
Lowell Foo, Engine: 2.0, Turbos: Frank stage 3 Tires: 205/55/16 BFG VR4


1990 Eagle Talon TSi AWD: 11.796 @ 117.640
Hector Cabrera, Engine: 2.0 Turbo (121 ci), Turbos: 20G/td-06h 7cm Tires: Falken 225/50's


1990 Eagle Talon : 11.800 @ 121.000
noel, Engine: 4g63, Turbos: t3/t4 Tires: 225/50/16


 


©2014 DragTimes - Disclaimer