Sorry about the video, hard to drive stick and hold camera at the same time. Performance mods: racing beat headers, open Exhaust, 88gxl LSD
Edit: I found out this video was done with my 6 port and VDI stuck closed so now this car is even faster.
1988 Mazda Rx7 NonTurbo Streetported redlining
1988 Mazda Rx7 streetported na redlining through the gears, for the record
i could of revved all the way to the end of the tach which is 8000rpm, so
this isnt 100% of what the car could of done ( for those questioning my
car's engine temp, my car is running at operating temp, its normally 1/4
of the way up fully warmed up..the car isn't redlining cold)
Racing Beat streetable header, straight pipe in place of cat, Borla 2.5"
catback Exhaust, K&N cone intake,
ported throttlebody, removed secondary throttlebody plates, lightweight
steel Racing Beat flywheel and Centerforce Dualfriction clutch, removed
5th/6th auxilary ports/sleeves/rods and actuators
1650 HP RX7, "The Sleeper Part 2", Scary and Funny, from NRE.
Nelson Racing Engines 1650 HP RX7 road video of this crazy sleeper.
Awesome power in this tiny car. This car is really scarry and very fast.
Some very funny video. I laughed a lot. More information and downloadable
videos for your IPOD and PS3 can be found at at
http://nelsonracingengines.com. and http://nelsonsupercars.com.
My mazda rx7 FC turbo II streetport
Recent updates here!!!
Small vid of my new mazda RX7 FC turbo
Overhauled engine with streetport.
corksport 3" Exhaust
And more to come in the futrure
60MPH in 2nd gear @ 8,100RPM and 150K miles
i cant believe over 40,000 people watched this. HAHA....
why? because i can. and keep in mind, i'm trying to steer, shift, and hold
a camera all at the same time. so keep the hate to yourself.
85 rx7. 60MPH in 2nd gear at about 8,100RPM's. as i hit 150,000 miles on
Mazda RX-7 Spitting Huge Flames from Exhaust!
When I was driving back from an event, this turbocharged Mazda RX-7 FD3S passed me in a
tunnel. As you can see this tuned Mazda RX-7 FD3S was spitting some huge
flames from the Exhaust! Hate it or
love it, I really enjoyed it! :)
1st Channel: http://www.YouTube.com/GUMBAL
2nd Channel: http://www.YouTube.com/GUMBALTV
3rd Channel: http://www.YouTube.com/CarChannelClassic
Thanks you for watching my videos. All feedback on my videos are
appreciated! Don't forget to like the video and subscribe to my channel.
More videos coming up!
91 RX-7 S5 Start and Exhaust Sound Check
This video is to show how a well maintained RX-7 idles when cold-started.
It will first idle at 3,000 RPM for about 10 seconds to build oil pressure.
Then it will drop to 1,500 RPM for about 15 seconds to warm the seals. Then
it will drop to 600-750 RPM resting idle after about 30-45 seconds. Car is
fitted with a K&N Cold Air Intake with heat shield and a 2¼" High-flow
Cat-back dual Exhaust system. The car
has 54,000 miles.
*Car was Pre-warmed prior to recording the video. I would never cold rev a
S4 RX7 13B turbo skid
A few pics of this after it was pulled off the road, is all complete and
running now. new vids to come
check this 1 from horidori meeting
The Zero F**ks Given RX7 - /TUNED
Would you drive a car built by a teenager in his parents driveway with no
safety features whatsoever? We did, and now we'll tell you why this ugly
RX7 is so brilliant.
650hp 20b rx7 and 180hp 12a rx2 cruising pt.2
650hp bridge 20b rx7 and 180hp 12a rx2 cruising on the way home from a car
show at spanish banks in vancouver. part 2 **look in description for other
**here are some other videos of this car that my brother uploaded on his
1 with a 3rd gear pull
and another with a different 13b rx7
video taken on iphone 4 from my civic
Mazda RX-7 Spirit R: The Glory Days of Japanese Sports Cars - Ignition Episode 31
On this episode of Ignition, Carlos Lago convinces Mazda to hand him the
keys to the only left-hand drive RX-7 Spirit R in the world. After a quick
look underneath the car, Carlos hits the winding road to explore the
involving driving experience and rotary engine that made the Mazda RX-7 so
unique, as well as its connection to the new generation of lightweight,
rear-wheel drive coupes like the Subaru BRZ and Scion FR-S.
Ignition appears every Monday on the Motor Trend youtube channel.
Subscribe now to make sure you're in on all the action!
Facebook - http://facebook.com/motortrendmag
Twitter - http://twitter.com/motortrend
Google+ - https://plus.google.com/101867967859016552744/posts
Website - http://www.motortrend.com
Mazda Rx7 4-rotor race car. The making of a Defined Autoworks Beast. [Offical Video]
Never before seen footage showing the assembly/start-up of our custom
4-rotor. It is the first 4-rotor since the 787b to use triple spark plugs
per rotor. It is also the first since the 787 to feature telescoping intake
manifold. Custom made slide throttle body system. A world first however is
the use of a center main bearing and 4-piece eccentric shaft. Quick specs-
9.7:1 rotors, lightened and race clearanced. Race main bearings, and race
rotor bearings, ceramic NRS 2mm apex seals. Custom stationary gears, Full
custom Peripheral Port in each rotor housing (defined auto), Aluminum side
housings for reduced weight. Needle roller bearing in the center housing.
4- Piece eccentric shaft 0:47
Dynamic engine balancing 1:23
Variable length intake 2:20
Engine assembly 2:32
Rotor rotation 3:49
Slide throttle 4:00
4-rotor startup and idle 4:30
All footage and editing was done by Defined Autoworks. Music by Ivan
Contact us at 614-592-7991 we build any type of rotary powerplant to the
See the build thread here-