How To Install Your Duraflex Body Kit - Body Kit Installation Steps - Install Body Kit From Home!
Body Kit Installation Steps -- How To Install Body Kits From Home Blog:
Learn Exactly how you can install and paint your own body kit yourself.
You'll get high quality results if you just follow the step-by-step
techniques and body kit installation methods that we have in video for you.
Get extreme looking results and learn how to body work and paint like a
Step 1. Inspect your body kit and check the overall quality out.
Step 2. Dry fit your kit to the car or truck.
Step 3. Get ready to do some bumper replacement, modification and body
Body Kit Inspection:
When first getting your body kit you'll want to give it a good look over.
See if it has gouges, cracks and ripples in the mold (which is normal)
especially if your buying a body kit in the range of $200. -- $1,500.
If you're spending more on a brand name quality kit for a BMW or Mercedes
then you'll be paying from $5,000 -- $20,000 for the high end wide body
Their molds are superior and made out of OEM style polyurethane which
doesn't need much modification before being painted.
See our recommended gear here:
Connect on Facebook for More FREE Updates:
Connect on Google Plus: https://plus.google.com/105353659833960525090/about
See What Our VIP Training & Community Can Do For You:
Get A Free 85 Page Auto Body & Paint Manual Here:
2002 Ford Focus Clutch Replacement Video (Part 2) - EricTheCarGuy
Here is a link to the full video
Part 3: https://www.youtube.com/watch?v=rvuIFAWeFSQ
Well here is the second installment in the Focus clutch replacement video
and we get a little farther in the process so sit back and enjoy watching
me get dirty.
Click below and Stay Dirty
Visit me at EricTheCarGuy.com
Visit EricTheCarGuy Forum
Visit my Facebook Page:
Due to factors beyond the control of EricTheCarGuy, it cannot guarantee
against unauthorized modifications of this information, or improper use of
this information. EricTheCarGuy assumes no liability for property damage
or injury incurred as a result of any of the information contained in this
video. EricTheCarGuy recommends safe practices when working with power
tools, automotive lifts, lifting tools, jack stands, electrical equipment,
blunt instruments, chemicals, lubricants, or any other tools or equipment
seen or implied in this video. Due to factors beyond the control of
EricTheCarGuy, no information contained in this video shall create any
express or implied warranty or guarantee of any particular result. Any
injury, damage or loss that may result from improper use of these tools,
equipment, or the information contained in this video is the sole
responsibility of the user and not EricTheCarGuy.
Replacing a BMW Self-adjusting Clutch & Dual-mass Flywheel Part 1 of 2
www.bavauto.com -- In this How-To DIY video series (Part-1 and Part-2) we
will be replacing a typical BMW clutch and flywheel. For more details on
this DIY, see our Tech Blog at www.blog.bavauto.com/go/clutchrepair .
These videos show the full removal, replacement and reassembly of the
self-adjusting clutch (SAC) and dual-mass flywheel, special instructions
that MUST be followed in the installation of the self-adjusting clutch,
failure modes of the dual-mass flywheel and finally, installation of the
UUC lightweight flywheel and performance clutch. We will also install the
UUC Short Shift Kit and DSSR. See the separate DIY video for the shifter
install at www.blog.bavauto.com/go/shortshift . All of the parts shown in
this DIY series are available at Bavarian Autosport. Visit our online
store at www.bavauto.com or call or knowledgeable agents at 800-535-2002.
Don't forget to "like" this video and send us some comments!
2004 Dodge Neon SXT slighty modded
My 2004 dodge neon, welded Exhaust by
Thrush and cold air intake by K&N. Planning on getting a body kit and other
mods as well, so I should be making a new video here in the future.