Drag Racing 1/4 Mile times 0-60 Dyno Fast Cars Muscle Cars

mazda mx-6 ls turbo engine bay probe 2.5 ls

idleing. the Exhaust is not hooked up past the downpipe, thats why its so loud. *attention idiots* This car is and has been intercooled for over a year (maybe two?) now. Stop making comments about it.


 


More Videos...


Mazda mx 6 KLZE
Rebuild Mazda 2.5i V6 KLZE JDM





Mazda Mx6 LS turbo Mic in front of radiator.
A short video with the microphone in front of the radiator. I recently blew an Exhaust gasket on the rear primary and have been hesitant to fix that..It can be heard in the video.. Im also Boosting 7psi, with a bit of lag I suppose from that leak. I Didnt go crazy with any of these pulls being the roads I take are often patrolled. In the video you will see I hesitate to shift into 4th, I was already doing over the speed limit and approaching traffic cones but I went for some of 4th anyway ;)





1996 Mazda MX-6 V6 M-Edition Start Up, Engine, and In Depth Tour
In this video I give a full in depth tour of a 1996 Mazda MX-6 M-Edition. I take viewers on a close look through the interior and exterior of this car while showing details, over viewing of features, and noting unique styling cues to the vehicle itself. I also show the engine and the details of it, start it up and see how it sounds under acceleration. A thorough tour/review of this car designed to give others a greater overall appreciation of the vehicle.





Mazda 3 2014 Skyactive-G 165 - acceleration 0-220 km/h and more dynamic tests
One of the last naturally aspirated engines in the compact class on European market. Surprisingly good and potent. More at http://www.Autoforum.cz/testy-aut/test-mazda-3-2014-skyactiv-g-165-dobe-nav zdory/





Mazda 6 2013 2,2 SkyActiv-D - acceleration 0-200 km/h + Vmax test
Full review at: http://www.Autoforum.cz/testy-aut/test-mazda-6-wagon-2013-2-2-skyactiv-d-pr izemne-pasivni/





Montaje del Motor Renesis - Mazda RX-8 - NO REBUILD
Proceso de remontaje del motor Renesis de un Mazda RX-8. NO ES UN REBUILD de Motor puesto que no se han cambiado ninguna junta de estanqueidad, sellos de aceite o sellos de motor. Se ha limpiado todas las piezas y se han reutilizado, con el propósito de practicar el montaje del motor y almacenarlo de una manera mas compacta para en un futuro rehacerlo con piezas destinadas a su uso en competición. REPITO: NO REBUILD, el motor no funcionará puesto que no tiene juntas de estanqueidad, es un video de propósito meramente instructivo. Manual de Taller: http://foxed.ca/rx7manual/2003mazdarx8/





Mazda MX6 Ford Probe GT 2.5L V6 Automatic Transmission in car rebuild Fix Part 2 of 3
Like to fish visit http://www.tristatefishing.com Third and forth gear clutch pack replacement video for G4 two pan trans.





Mazda Mx6 LS-Turbo
Cruising around town, attempting to get some clean crisp video to no avail. Cops and sunday drivers were everywhere and the wind noise drowns out the engine noise.. Looking into getting a Mic for the Gorpo.





Turbo MX6 vs Supercharged IS300
My turbo MX6 KLZE vs a Supercharged IS300





Turbo Mazda MX-6 vs S/C Corvette C5 vs Turbo Civic
Oct 6, 2013 Rockingham NC Dragway, Phantasm, 1/4 Mile





Mazda MX6 2.5i V6
petit essais il y a 2ans de ça.. que du bonheur avec quelques petite modifs deja simpa a l'époque!





Mazda Rx7 4-rotor race car. The making of a Defined Autoworks Beast. [Offical Video]
Never before seen footage showing the assembly/start-up of our custom 4-rotor. It is the first 4-rotor since the 787b to use triple spark plugs per rotor. It is also the first since the 787 to feature telescoping intake manifold. Custom made slide throttle body system. A world first however is the use of a center main bearing and 4-piece eccentric shaft. Quick specs- 9.7:1 rotors, lightened and race clearanced. Race main bearings, and race rotor bearings, ceramic NRS 2mm apex seals. Custom stationary gears, Full custom Peripheral Port in each rotor housing (defined auto), Aluminum side housings for reduced weight. Needle roller bearing in the center housing. 4- Piece eccentric shaft 0:47 Dynamic engine balancing 1:23 Variable length intake 2:20 Engine assembly 2:32 Rotor rotation 3:49 Slide throttle 4:00 4-rotor startup and idle 4:30 All footage and editing was done by Defined Autoworks. Music by Ivan Torrent. www.DefinedAutoworks.com Contact us at 614-592-7991 we build any type of rotary powerplant to the highest standards. See the build thread here- http://www.rx7club.com/build-threads-292/iv-rotor-build-12-plugs-9-bearings -8-ports-%3D-1-monster-1037657/





Mazda MX3 Turbo Dyno 342whp MX-3
Finally tuned it a little. This pass was 14psi. 342whp, 315tq





Mazda rx-7, engine 13B, Rebuilding rotor engine, Final Stage





RX-8 Acceleration 231HP 220km/h Wroclaw ring 1st Nov. 2011





Which car is faster? Which Car is Faster?




Similar 1/4 mile timeslips to browse:

2005 Mazda 6 Drag Car: 7.930 @ 187.000
Ed Bergenholtz, Engine: 2.3L Mazda i4 by Golden Eagle Mfg., Supercharger: None Turbos: Garret GT45 Tires: M & H


1991 Ford Probe LS: 8.110 @ 166.000
Fred House, Engine: 2.3, Turbos: JS Single 76mm


1990 Ford Probe GT Turbo: 8.180 @ 169.000
Matt Faul, Engine: Toyota 2jzge Long block, Turbos: Borg Warner S480 Tires: 33x10.5W Rear M/T, 24x3.5 M/T Front


1996 Ford Probe GT Turbo: 8.746 @ 161.333
Lyle Poxx, Engine: Eslinger 2.3L Ford Block bored 0.080 over, Turbos: Presicion Single 80mm Tires: Goodyear slick 31x14.5


1993 Ford Probe GT: 10.717 @ 133.822
Dan Ciobanu, Engine: 2.5L V6, 24-valve DOHC, Supercharger: none Turbos: Garrett T04 60-1 stage3 Tires: Hoosier 26x9x15


2006 Mazda 6 Mazdaspeed: 11.381 @ 123.940
Anthony Pannone, Turbos: ATP GTX35R Tires: Conti DWS 215/45/18


2006 Mazda 6 Mazdaspeed 6: 11.612 @ 119.220
Anthony Pannone, Engine: 2.3l MZR DISI, Turbos: GT3076R Tires: hankook evo V12


2006 Mazda 6 Mazdaspeed 6: 12.011 @ 113.930
Andrew , Engine: 2.3 MZR, Turbos: GT3071R Tires: Federal SS


2006 Mazda 6 Mazdaspeed 6: 12.240 @ 114.270
Anthony Pannone, Engine: 2.3L MZR turbo, Turbos: GT3076 Tires: hankook evo V12


2007 Mazda 6 Mazdaspeed: 12.263 @ 111.750
Rich Brockman, Engine: Stock, Supercharger: n/a Turbos: Stock Tires: 225 55 17 Conti DWS Extreme


2007 Mazda 6 mazdaspeed6: 12.301 @ 113.200
Jeff Hawkes, Engine: MZR 2.3T, Turbos: stock k04


2006 Mazda 6 sport: 12.370 @ 111.000
charles, Engine: 2.3, Turbos: 7 blade gt3076 ported .55 a/r hotside Tires: nitto neo gens 245/35/19


2007 Mazda 6 MPS: 12.501 @ 112.000
MazdaGaragePat, Engine: MZR 2261 cc, Turbos: Garrett GT3076 T3 divided 1.06 Tires: 235/40 R18 Federal 595 RS-R


2006 Mazda 6 mazdaspeed6: 12.550 @ 109.000
charles, Engine: 2.3l, Turbos: gt3076 Tires: Bf goodridge kdw 235/35/18


2007 Mazda 6 Speed6: 12.620 @ 110.090
p057, Engine: stock, Turbos: gt3071 Tires: hankook ventus v12s 225/40/18


2006 Mazda 6 speed6: 12.624 @ 107.800
charles, Engine: 2.3 turbo, Turbos: gt3076 Tires: NITTO NEO GENS


1996 Ford Probe GT T3T4 Turbo: 12.643 @ 116.260
Sean, Engine: KLDE, Turbos: T3T4 Tires: Yokohamas avs es100


2006 Mazda 6 Mazdaspeed 6: 12.655 @ 111.360
Anthony Pannone, Engine: stock, Turbos: GT3076R


2006 Mazda 6 Mazdaspeed6: 12.655 @ 111.750
Andrew Helm, Engine: stock block, Turbos: GT3071r Tires: Nitto NT555


2006 Mazda 6 mazdaspeed6: 12.850 @ 105.850
Michael, Engine: 2.3 disi turbo, Turbos: stock Tires: stock


 


©2015 DragTimes - Disclaimer - Contact Us