Kawasaki 48 Cylinder Runs!
Quick clip of the Worlds largest multi Cylinder Motorcycle, this 48
cylinder bike was built by my pal Simon Whitelock - here it is at the
Triples Rally in 2004 - it is actually 49 cylinder as the initial sound is
of the single cylinder starter engine
1/6th scale Corvette engine
NEW VIDEO posted at: http://www.youtube.com/watch?v=jg0k7zDsB8w . This is
a 1/6th scale Chevrolet V8 based on a 327 cu in Corvette motor. See more
info at http://www.moyermade.com
World smallest V12 engine
Apparently the builder's name is Yesus Wilder and he only used three
materials to build the engine. Stainless steel, aluminum, and bronze.
All credits to him.
Early Run of My V-Twin model Engine by Terry Mayhugh
Just completed ... mostly machined on a Tormach PCNC mill with
SolidWorks/SprutCam CAD/CAM plus manual lathe work on the cast iron
cylinders, pistons, rings and crank. One inch bore with 1.25 inch stroke.
Built entirely from material from a local scrap yard. Plan set available
from Jerry-Howell.com. Mayhugh engine V-twin vtwin tormach howell
Scale Model Running Challenger Flathead V8 By Ron Colonna
Bore: 1 in.
Stroke: 1 in.
Displacement: 100 cc
Max RPM: 6,000
This engine was built early in my gasoline engine building career. I
received the castings and drawings as a Christmas gift from my wife. I had
it running about five months later. This is the engine that creates the
most interest at the shows. So much so that I've had to rebuild it twice
because of wear. As designed, it had some major shortcomings. The conrods
were bronze castings which promptly wore grooves in the crank. These were
replaced with rods machined from 2024 aluminum. Pistons were remade and the
engine fitted with rings made from the George Trimble method. Oil control
rings are a necessity as the engine smokes badly without them. An electric
start system was added and the engine now runs with the push of a button.
wcm pro stock 1/4 scale test run
1/4 scale Pro Stock custom built with 90cc Solo motor and quick change rear
end, this was the first few runs down the track before making some
changes.. Keep your eyes out for our next few videos running this car on Nitrous.
World's Smallest Supercharged V8
Note: This is not my engine, I didn't build it, I just posted the video on
youtube for others to watch. Any questions about this engine should be
directed to the builders website: http://www.weberprecision.com/
This miniature four-stroke V8 engine has a 1.000-inch bore, 0.900-inch
stroke, 9:1 compression ratio, 12,000rpm max., rotary sliding vanes (Supercharger), dual WALBRO carbs, dual
electronic ignition, and a two stage dry sump oil system.
Worlds Smallest Running Chevy V-8
Newest video of the 1/6th scale Moyer Made Chevy V-8 based on a 327 cu in
Corvette Motor. Everything is to scale, yes even the spark plugs and
distributor. See more at http://www.moyermade.com .