1970 Chevrolet Nova 1000HP
Over 1000HP
Check out my facebook page! "Like" & Share!
https://www.facebook.com/MikeAnthonyAutosportsyoutubecomnorthsiderollers
Scion TC With lots of stickers......
RICED??? Theres a way to make a Scion TC right. and theres a way to do it wrong. therefore not all scions are riced.
Dodge Challenger Slow motion Wheelie
1974 Dodge Challenger Slomo Wheelie vid. Santa Pod 2010 eurofinals. By Blackett Photography. Here the car is powered by a 572ci Wedge motor. Runs mid 9's @ full weight (3850lb +). To make the caltracks work you need plenty of front end lift, bump stops were removed and frames notched to get almost 6 1/2 inches of travel. Something Chrysler never designed that suspension for I'd guess. We've since improved the bump steer by replacing parts and resetting the camber / castor as the front has aftermarket parts and plenty of adjustment.
In reality it's difficut to fully eliminate without going to a strut type front end, though some people appear to have done it on stock stuff, it seems to be a common chrysler trait. Check out the superstock video's from the '70s and most Mopars do it also check out my other real time wheelie vids you see that the wobble lasts only a fraction of a second.
Thanks for the comments.
900hp 1972 Dodge Challenger OO...OO
~ Engine = 1977 440 out of an RV .
~ 440 block is bored .030 over to 4.350" ..
~ Stroked to 500 cubic inches using 4.15" stroke..
~ 6.760" I-Beam rods with ARP 12pt cap bolts..
~ 1/2 inch main girdle integrated with BCR billet main caps..
~ ARP studs with 12pt nuts..
~ Ross Racing billet pistons, dished - 32cc's for a 8.7:1 compression ratio
~ Edelbrock Performer RPM Heads with 84cc chambers...
~ Comp Cams Hydraulic Roller Cam .550 lift with 214 degrees lobe separation.
~ Custom built blow-thru Holley carb with Boost referenced fuel pressure regulator.
~ 1000 gph fuel pump.
~ Methanol Injection
~ F1 Procharger @ ? PSI
~ Currently revs to 6,500 rpm..
~ MSD 6-BTM
Wheels = Vintage Wheel Works V48 - 17 X 8 Front. . . 17 X 12 Rear
Tires = Nitto NTO1 245/45/17 Fronts with 315/35/17 Rears..
Brakes = Wilwood 13inch cross/drilled slotted rotors ... 4 piston calipers front & rear..
Transmission= Rebuilt Torqueflight A-727 with Kevlar clutches... and retuned front + rear shift bands...
Suspension mods are coming soon ///
Feel free to argue with the comments
Ask any questions ALWAYS
Driver: Will G.
Owner Will G.
The horse IS a Mustang hahaha!!!!
1974 Dodge Challenger Rallye Frame up Restoration - PART 1
Frame up restoration of a 1974 Challenger. Initial prejob pics were not available at the time of making this, it will be added at a later date. This project currently has it start just where we have removed the mechanicals, interior and the paint has mostly been stripped off the car.
