Plastic Dipping , iç ve dış alanlar için uygun olan ve hava ile teması sonucu kuruyan ve daldırma, fırça ile uygulama ve basınçlı hava tabancası ile püskürtme işlemiyle gerçekleştirilen sentetik kauçuk kaplamadır .Kauçuk ile kaplar, katmanlaştırır, korur, sıkıştırır, yalıtır ve kaymayı önler. Her türlü hava koşuluna karşı uygundur..
Her zemine uygulanabilen ve sıkıldığınızda çok kolay sökülebilen , Koruyucu özelliği ile % 400 esneyebilen yapısı sayesinde dışarıdan gelen fiziki darbelere karşı alt yüzeyi koruma altına almaktadır. Sökülmesi halinde alt yüzeydeki (boya ,plastik ,cam ,krom vs.) kesinlikle zarar vermemektedir. -34ºC ile +150ºC arasındaki ısıya, sürtünmeye ,rutubete, asite, tuza ve bazik maddelere karşı dayanıklı kaplama malzemesidir.
Chrysler 300C body kit custom Rolls Royce Phantom - By CWC
Modification de la face avant d'une Chrysler 300C avec un kit Rolls Royce
Phantom, installation d'un kit Lambo Doors et de 4 jantes Chrome 22pouces
par le garage auto California Wash Concept à Baillargues près de
Peeling Plasti Dip off a Whole Car
Our experience peeling Plasti Dip off of the DYC A4.
Notice: All cars, paints, and surfaces are unique. Please refer to Terms
and Conditions page on www.dipyourcar.com for more info and guidelines
DipFoam System here:
Fonzie from DipYourCar.com shows a full car Plasti Dip peeling removal.
Dipped car peeled off and cleaned,
NÃO PERCA TEMPO! ENTRE EM CONTATO CONOSCO, E FAÇA SEU ORÇAMENTO E
GARANTA A MELHOR QUALIDADE EM IMAGENS PARA SEU VIDEOCLIPE.
G.c Movies Production
Fone: (062) 8543-4460
Plastidip Taillight Tint Stencil Diy
Here are the answers to most of your questions....
1. Will it come off?
No it's not permanent but YES it is resilient. I had it on my lights for
months with out it getting scratched or peeling.
2. Is this regular or smoke Plastidip
It is regular. I do say this in the video, however I should have put it in
the description. Sorry for the confusion.
3. Is that Forza Music? What kind of car is that?
Yes it is! :) Makes for great ambient music. Also, it's a BMW 335xi. It's
my winter car. (thus the whole "it's cold right now" in the video)
4. Yes it IS illegal.
At least where I live. HOWEVER, no I didn't get pulled over once for it. I
got pulled over for speeding and the cop didn't even mention it. I really
think it just depends on the cop that is behind you and how he feels about
5. isn't it too dark? Aren't you worried about people not being able to see
your lights when you brake? etc.
No, in the video they might look KIND OF dim, but in person the light
output was barely changed. HOWEVER, that doesn't mean that it wont be on
your car. It depends on what kind of bulbs you have, HOW MANY COATS YOU
DID, and just in general how nice your lights are. Either way, it was not
an issue with me and not once did I get the impression that someone
couldn't see them. Plastidip IS very transparent if you do a few light
coats... you literally JUST watched proof that it is... lol
6. Why didn't you use film? or why didn't you use "night shade"?
First off, I didn't use night shade because until I read these comments I
hadn't ever heard of it.
Second, I didn't use film because the other sets of film that i've used
either didn't fit right, were a pain to take off, peeled up on the edges,
and were much more expensive than this DIY.
7. Why did you use masking tape instead of electrical tape, duct tape etc.
Because masking tape leaves ZERO residue. Duct tape and electrical tape can
both leave lots of residue. As I stated in the Video though, you can always
use flexible nylon/ straight line tape I believe for round edges.
8. Why didn't you just mask everything BUT the clear part then blah blah
really?... mask the part that I WANTED to paint?....
A. that would have taken forever
B. it would have used WAY more paint.
C. I would NEVER mask everything then use a razor on my tail lights....
thats just silly.
9. What was the point of the "press and seal"
The point of that was to show you another way that I had seen it done. I
then went on to say how I do not reccomend it cause you would get garbage
10. How many coats did you do?
If you watch the video I technically did 1 coat. it was a thick coat but I
did that because I knew I wasn't going to be laying it on to the point that
it was not transparent. you will have to be the judge on how many
coats/passes you do. Good news is, if you put on too much, or too little,
no worries! It's plastidip and it'll come right off! Than do it again!
11. Could you do this on your headlights?
I guess you could... although I could see that being a much easier way to
get pulled over. But really, it's worth a try. Worst case is you tell the
cop that pulls you over that you didn't realize it was illegal and ask him
if he'll give you the opportunity to peel it off on the spot.
12. Do you feel the edges with your hands?
You can if you rub your hand over it, but it's very faint. And no it did
not make it peel.
Really at the end of the day, Like I said in the video. Its not everyones
style. It's non permanent, it's SUPER cheap, and most of all THIS MAINLY
WAS A TEST AND A GUIDE ON HOW TO STENCIL YOUR TAIL LIGHTS not REALLY how to
plastidip your lights. So use whatever product you want. I just used
regular dip cause I had some lying around from doing window trim.
And like most mods to your car, you're doing this at your own discretion,
so be safe and use common sense. if you "black out" your lights, you may be
running the risk of accident. So only go to the point that they are still
Thanks for all the thumbs up, and all the kind comments. Hopefully this
answered most of your questions.
DYC DipSprayer Spraystation - The Sprayer Made for Plasti Dip
Sprayer found here - https://www.dipyourcar.com/dyc-dipsprayer.html
DYC DipSprayer™ System. World's first sprayer system specifically
designed to spray Rubber Dip Spray/Plasti Dip. This system was designed
from the ground up by DipYourCar.com with the backing of Earlex®.
Advancements and enhancements were made to the system to provide a better
user expereince, and smoother finish when spraying Rubber Dip Spray or
Plasti Dip products.
- DYC Turbine. 50% more PSI and increased CFM over the old 3500 turbine.
Increased PSI and CFM translate to much better atomization and a finer,
- DYC Sprayer handle. Includes the DipTip™, a needle designed of a
specific size and shape to further increase atomization of dip, resulting
in a much smoother finish over the standard 3500 needle. Rear of gun locks
in with DYC Quick Connect Hose - allowing gun to rotate 360 degrees (to
avoid twisting of hose) and locks in place to avoid hose popping out during
- DYC Quick Connect Hose. 16.5 feet long, smooth bore (to reduce air
temperature) and extremely durable. Hose is kink and impact resitant.
- DYC Spare Parts Kit. Includes all items that may eventually need
maintenence or possible replacement on your spray system. A spare gasket,
2 spare needle seals, a replacement air filter and a needle removal tool
are all put in your hand from day one.
- Gallon blender/mixer. Attaches to any household drill to allow perfect
blending and mixing of your dip gallons before use.
Restore Bad Car Paint with Plasti Dip
Repaint your own car. Faded paint, faded clear coat, bad paint, bad clear
coat, restoration do it yourself car painting using Plasti Dip and
DipYourCar.com's Pro Car Kit. Peel Coat
Review: 2006 Chrysler 300C SRT8
I review the 2006 Chrysler 300C SRT8! One of the most fun cars I've
reviewed all year! What do you think about this car? This car is currently
for sale at Harrison Auto Sales. See more information about it here:
Song is 'ADHD' by MDK and can be heard here: http://youtu.be/epJ4jm-zklU
MDK Facebook: http://facebook.com/mdkofficial
MDK YouTube: http://youtube.com/mdkofficialyt
Follow me on Twitter! @Subaruwrxfan and "Like" the Facebook page for more
Business inquires can be directed to subaruwrxfanproductions (at) gmail
Pearl White Plasti Dip Car
Fonzie from DipYourCar.com shows the DipYourCar Pro Car Kit, Plasti Dip
Pearlizer Gallon making a Pearl White finish on a Audi A4.