2006 r1 after market Turn signal light

Yamaha r1 after market turn signal light ( very cheap)

More Videos...


Yamaha R1 2009 DIY Installation of integrated tail light
Yamaha R1 2009 DIY Installation of integrated tail light





How to: 2004-2006 Yamaha R1 Integrated Taillight Installation by TST Industries
Want that racing, sleek look for your R1? Install our Integrated Taillight with built in signals for a hot new look. For more info see: http://tstindustries.com/Integrated-Taillight-Yamaha-YZF-R1-2004-2006.html? utm_source=YouTube&utm_medium=04R1INT_install&utm_content=description&utm_c ampaign=2014_YT_PRODUCTS Make sure to subscribe here: http://bit.ly/1jq2ZrN Follow us on Facebook here: http://on.fb.me/1nuTjlF Our taillights are super bright, plug and play, and easy to install. You simply cannot get a cleaner look under your tail! The light plugs right into the stock harness and installs in minutes. The signal wires use plugs also so there is no need for time consuming wiring. We even include load balancing resistors in case you need to slow down your flash rate. The light uses 64 super bright LEDs so the brake light and signals are very noticeable. Available in clear and smoked. This is not a cheap imitation but a well designed and manufactured taillight unit. It is the best bang for the buck and the same quality as our other products that have met with tremendous success around the world. If you do not want to use the resistors you can upgrade to our Gen2 Flasher Relay, which is a plug-and-play component (you can reference our relay installation video on our channel).





How to: 2004-2006 Yamaha R1 LED Flasher Relay Installation by TST Industries
Our amazing new Gen2 relay will fix your flash rate problem caused by aftermarket signal lights and/or integrated taillight. For more info see: http://tstindustries.com/LED-Flasher-Relay-Gen2.html Make sure to subscribe here: http://bit.ly/1jq2ZrN Follow us on Facebook here: http://on.fb.me/1nuTjlF If your signal lights flash too fast this part is your solution!! It is very easy to install and does not require any special tools...it plugs right into the harness. This component works with the following signal configurations: 1. All stock 2. Stock taillight, aftermarket signals 3. Integrated taillight, stock signals 4. Integrated taillight, aftermarket signals. We designed this part to fit exactly like the OEM part so the installation is a snap...and it looks awesome too! The relay comes preset to 85 cycles per minute. You can alter the flash rate, make it faster or slower. If you slip off the grey cover you can access an adjuster that will enable you to change the flash rate to your liking. You can reference the relay adjustment video here: http://youtu.be/gwq4kTjW3m8





How to use running light as a turn signal
this shows you how to hook up an AUX light so it can be used as both a turn signal and a running light. this will work on both motorcycles or cars and trucks Or how to use your turn signal as a running light Or how to use your running lights as a turn signal All you need is, Your Aux. Light Some hook up wire and a 5 pin 12v 30/40a Relay Here is a Diagram of the hook up: http://s176.photobucket.com/albums/w174/markemark513/?action=view¤t=t urnrunninglight.jpg




Follow