Drag Racing 1/4 Mile times 0-60 Dyno Fast Cars Muscle Cars

Motorcycle LED Turn Signal Light with Electronic Signal Relay

A pair of 14 LEDs motorcycle turn signal lights work with the electronic relay.


 


More Videos...


RELAYS - How to wire and how they work TUTORIAL !!
How To Wire A Relay ....Tutorial ....How To Wire Fog Lamp Relay How To Wire A Fuel Pump Relay .. how A Car Relay Works....Step by Step Electrical Relay Diagnosing Troubleshooting .. How To Test A Relay .. GM Fuel Pump Relay.. Electric fan . Radiator fan . Switch . Burned . Faulty . Non working . Blown . How to diagnose and find . Motorcycle . Boat . Rv . Bike . Plane





How to Install Resistors for LED Turn Signals, Fix Hyperblinking!
RESISTOR KIT HERE: http://bit.ly/1b4x536 This video demonstrates how to install standard LED resistors in order to slow down LED turn signals. Resistors and LED bulbs available from Diode Dynamics! Give us a call with any questions 314-205-3033 or email contact@diodedynamics.com I know all of you master electricians might say otherwise, but quick splices are very good for the purposes here. Please don't tell people to solder- if you do not have proper tools and experience, you will do a very poor job and it will simply crack and break within weeks of installation.





How to Make a Relay Turn Signal
How to Make a Relay Turn Signal Get the Book at Amazon: https://www.createspace.com/3887599 Get the Android Book-APP: https://play.google.com/store/apps/details?id=com.app.book.AOTSPDFJFVQCTYUQ HR&feature=search_result#?t=W251bGwsMSwxLDEsImNvbS5hcHAuYm9vay5BT1RTUERGSkZ WUUNUWVVRSFIiXQ.. Get the Kindle Book: http://www.amazon.com/Automotive-Relay-Circuit-Guide-ebook/dp/B0085NBA4E/re f=sr_1_1?s=digital-text&ie=UTF8&qid=1358529593&sr=1-1&keywords=Automotive+R elay+Circuit+Guide Turn signal circuits are often an area of trouble for technicians. In all cases, the turn signal switch is also in charge of the hazard lights and to make matters worse, the hazard and the turn signal switch is often a separate unit. Here in this section, we'll not concentrate on the hazard switch, but simply explain how to wire the entire turn signal system. The idea is to offer a way to make the turn signals operational if you have no parts available, due to the vehicle being out of the parts market, being too rare or just due to the high costs. In actuality, this wiring arrangement can be used even if you have no turn signal switch, which would then be substituted using standard buttons or flip switches. This circuit also employs a regular flasher unit right at the 12 volt input. The flasher unit feeds both relays. This is done for the sake of efficiency and to reduce costs. The only drawback to using one flasher is that whenever the hazard is activated, the lights will flash at a faster rate. Let's analyze this circuit: Power is fed from the 12 volt supply, through the fuse and to one side of the flasher unit. The other side of the flasher feeds terminals.... Get the whole story right now in this video...Enjoy... Amazon Printed-Books & Kindle: http://www.amazon.com/s/ref=nb_sb_noss_1?url=search-alias%3Dstripbooks&fiel d-keywords=mandy+concepcion Google Play Android APPs: https://play.google.com/store/search?q=mandy+concepcion&c=apps Amazon Video DVDs: http://www.amazon.com/s/ref=nb_sb_noss_1?url=search-alias%3Dmovies-tv&field -keywords=mandy+concepcion Barnes & Noble Nook: http://www.barnesandnoble.com/s/mandy-concepcion?keyword=mandy+concepcion&s tore=allproducts Apple iTunes iPad: http://itunes.apple.com/us/artist/mandy-concepcion/id449573393?mt=11





Tusk Motorcycle Enduro Lighting Kit - dirt bike installation
http://www.rockymountainatv.com - Information and mounting instructions for the Tusk motorcycle Enduro Lightling kit. This Motorcycle dual sport kit comes with everything needed to install horn, blinkers, tail light, brake light, mirror, etc. to your dirt bike. Available at Rocky Mountain ATV/MC





Plastidip Taillight Tint Stencil Diy
Here are the answers to most of your questions.... 1. Will it come off? No it's not permanent but YES it is resilient. I had it on my lights for months with out it getting scratched or peeling. 2. Is this regular or smoke Plastidip It is regular. I do say this in the video, however I should have put it in the description. Sorry for the confusion. 3. Is that Forza Music? What kind of car is that? Yes it is! :) Makes for great ambient music. Also, it's a BMW 335xi. It's my winter car. (thus the whole "it's cold right now" in the video) 4. Yes it IS illegal. At least where I live. HOWEVER, no I didn't get pulled over once for it. I got pulled over for speeding and the cop didn't even mention it. I really think it just depends on the cop that is behind you and how he feels about it. 5. isn't it too dark? Aren't you worried about people not being able to see your lights when you brake? etc. No, in the video they might look KIND OF dim, but in person the light output was barely changed. HOWEVER, that doesn't mean that it wont be on your car. It depends on what kind of bulbs you have, HOW MANY COATS YOU DID, and just in general how nice your lights are. Either way, it was not an issue with me and not once did I get the impression that someone couldn't see them. Plastidip IS very transparent if you do a few light coats... you literally JUST watched proof that it is... lol 6. Why didn't you use film? or why didn't you use "night shade"? First off, I didn't use night shade because until I read these comments I hadn't ever heard of it. Second, I didn't use film because the other sets of film that i've used either didn't fit right, were a pain to take off, peeled up on the edges, and were much more expensive than this DIY. 7. Why did you use masking tape instead of electrical tape, duct tape etc. Because masking tape leaves ZERO residue. Duct tape and electrical tape can both leave lots of residue. As I stated in the Video though, you can always use flexible nylon/ straight line tape I believe for round edges. 8. Why didn't you just mask everything BUT the clear part then blah blah blah... really?... mask the part that I WANTED to paint?.... A. that would have taken forever B. it would have used WAY more paint. C. I would NEVER mask everything then use a razor on my tail lights.... thats just silly. 9. What was the point of the "press and seal" The point of that was to show you another way that I had seen it done. I then went on to say how I do not reccomend it cause you would get garbage results. 10. How many coats did you do? If you watch the video I technically did 1 coat. it was a thick coat but I did that because I knew I wasn't going to be laying it on to the point that it was not transparent. you will have to be the judge on how many coats/passes you do. Good news is, if you put on too much, or too little, no worries! It's plastidip and it'll come right off! Than do it again! 11. Could you do this on your headlights? I guess you could... although I could see that being a much easier way to get pulled over. But really, it's worth a try. Worst case is you tell the cop that pulls you over that you didn't realize it was illegal and ask him if he'll give you the opportunity to peel it off on the spot. 12. Do you feel the edges with your hands? You can if you rub your hand over it, but it's very faint. And no it did not make it peel. Really at the end of the day, Like I said in the video. Its not everyones style. It's non permanent, it's SUPER cheap, and most of all THIS MAINLY WAS A TEST AND A GUIDE ON HOW TO STENCIL YOUR TAIL LIGHTS not REALLY how to plastidip your lights. So use whatever product you want. I just used regular dip cause I had some lying around from doing window trim. And like most mods to your car, you're doing this at your own discretion, so be safe and use common sense. if you "black out" your lights, you may be running the risk of accident. So only go to the point that they are still safe. Thanks for all the thumbs up, and all the kind comments. Hopefully this answered most of your questions.





HID Xenon Headlight Electrical Retrofit
HID Xenon Headlight Electrical Retrofit Does triggering relays directly from headlight connector, harm the headlight switch? The answer is yes. Activating relays is done by connecting voltage to a coil, which in turn creates a magnetic field. When voltage is removed from the relay, the energy that is stored in the coil collapses, and will send current the other way, by increasing voltage to several hundred volts. A small arc will be visible between the contact elements of the headlight switch. Over time, the switch will only work intermittently, and will eventually fail. That's why a serial diode is essential to protect the headlight switch. Here's the current path to a properly connected H.I.D. retrofit electrical wiring. The heart of most of the electrical work is at the H.I.D. relay. The relay, the most common is a Bosch type, has 5 terminals, of which 4 are of interest to you. Terminals 84 and 85, sometimes labeled 85 and 86, is the relay coil. Remember to install an in line diode between these two terminals. Most newer relays have this diode internally. As we've said before, the diode protects the headlight switch from damage due to arching. Shown in this video, terminal 84 is connected to ground. You may connect either of the relay coil terminals to ground. This is the activation ........That was just an excerpt of this video...Get the whole story here and do it an HID retrofit yourself. Save money with our HID retrofit video. Presented using advanced software CG animation technology to help you understand. Part of our Automotive Technology series shown here on this channel. Enjoy... *************************************************************************** *********** Amazon Printed-Books & Kindle: http://www.amazon.com/s/ref=nb_sb_noss_1?url=search-alias%3Dstripbooks&fiel d-keywords=mandy+concepcion Google Play Android APPs: https://play.google.com/store/search?q=mandy+concepcion&c=apps Amazon Video DVDs: http://www.amazon.com/s/ref=nb_sb_noss_1?url=search-alias%3Dmovies-tv&field -keywords=mandy+concepcion Barnes & Noble Nook: http://www.barnesandnoble.com/s/mandy-concepcion?keyword=mandy+concepcion&s tore=allproducts Apple iTunes iPad: http://itunes.apple.com/us/artist/mandy-concepcion/id449573393?mt=11





Fog lights installation
This video shows how to install fog lights on 2011 Toyota Camry LE.





How Not to Start a Group Ride
Rider forgets to put up kickstand when pulling out at start of group ride. Hilarity ensues. Luckily, both bike and rider were fine.





Instalação de relé auxiliar
Baixe nosso aplicativo para celular: http://app.vc/clebson_xenon Este é um vídeo de instalação de reléauxiliar de 4 pinos. Existe várias formas de instalação deste relé. Mas, eu estou mostrando esta para vocês. clebsonayka@hotmail.com





LEDGlow's Classic Motorcycle Lighting Kit Install
This video will help walk you through the process of installing your LEDGlow Classic Motorcycle Lighting Kit. LEDGlow's Classic Motorcycle LED Lights will give your bike added visibility when riding at night, while also giving it a custom look at an affordable price. LEDGlow offers motorcycle LED kits in 2 through 20 strip kits giving you full customization over your motorcycle LED lights. The included slim, easily hidden control box features a solid color mode with 4 brightness levels, 3 strobing modes, and 1 fading mode all of which are easily cycled through with the included 4 button wireless remote. Each flexible LED strip includes 5 feet of power wire and 3M adhesive tape allowing you to bend and curve each one for maximum mounting capabilities. LEDGlow's LED lights for motorcycles include a one year limited warranty and free lifetime technical support. For More Information Please Visit: http://www.ledunderbody.com/Classic-Single-Color-Motorcycle-Lighting-Kits.a spx?sitelink=youtube





Como probar un relay o relevador
Como probar el funcionamiento de un relay o relevador





HOW TO INSTALL HAZARD LIGHTS ON A MOTORBIKE/MOTORCYCLE/SCOOTER
A quick tutorial on how to fit hazard lights to your motorbike/scooter etc. Parts needed. 1 flasher relay 2 or 3 pin. 1 dpst switch on/off i am using a on/off/on switch but not using one set of terminals. 1 10 amp inline fuse holder plus fuse. Female spade connectors. Roll of cable/red/black makes visualisation easy.. Some heat shrink tubing to add to the finished item. REMEMBER X TERMINAL ON THE RELAY = 12 VOLT INPUT. L TERMINAL ON RELAY = LOAD OUT TO SWITCH. P TERMINAL ON RELAY TO THE PILOT LIGHTS ON DASH OF BIKE. Fitted result http://youtu.be/7iGPFwB7LFU





How to Make Turn Signal Arrow Light
How to Make Turn Signal Arrow Light If u Have any ? Please Post a Comment Below or Send me an Email to sasitharaan@gmail.com





Installing LED signal lights on 20-year-old motorcycle
To increase the time between battery charges on my 1993 Yamaha XJ600S which no longer charges its own battery, I decided to install LEDs on the front running lights and the tail light, as they will be much less of a drain on the battery. As expected, the running lights / turn signals were much more of a success than the tail light. The tail light is brighter but very small, given the directional nature of LEDs (particularly the older, bulbous type on this cluster). It was the only option available from superbrightleds.com that also had white LEDs for license plate illumination. The running/turn signal lights work a charm, and their turn-signal state is much brighter than the incandescent bulb, though the electronic flasher (required to make them flash at a normal rate) takes about a second to boot up and start working. An old scooter I had was like that, and I don't do sudden lane changes anyway, so I'm not too concerned about that. The tail light, though... I wonder if I should just get a tower type that illuminates in all directions, and dispense with the white illumination of the license plate. It may not be legal, but it would be brighter, even on the plate, I reckon. Maybe someone makes a splitter that would allow me to install two tail lights. There's plenty of room for such a thing in this bike's tail light cavity... (ADDENDUM: Actually once I recharged my battery, I was quite surprised at the tail light. It's still not as much contrast between the two states, but it's close, and the instant-on does make up for it a bit. I'd still prefer a larger cluster -- better yet one with extra LEDs that only turn on with the brake -- but I don't see anyone making one that has white LEDs for the license plate.) You may be wondering why I didn't change the instrument panel lights to LEDs, as those are always-on too... Well, they're not. Those bulbs burned out several years ago, so they're not draining anything! At night, I have a completely dark dash, and just judge my speed by feel/sound. Parts used, all available from http://www.superbrightleds.com : LF1-S-FLAT universal motorcycle electronic flasher. 1157-R19W6 -- 19 forward-facing red LEDs with 6 radially-faced white LEDs 1157-A45-T -- 45 amber surface-mount LED tower





2005 CBR 600RR LED Blinker relay install
This is a short video on how to install a LED Blinker relay instead of using resistors.




Which car is faster? Which Car is Faster?





Similar 1/4 mile timeslips to browse:

1985 Suzuki Motorcycle GS 1150 BASE 1327CC: 7.700 @ 175.000
RICKEY BARNES, Engine: 1327 STAR BB, Turbos: MR. TURBO Tires: GOOD YEAR 29X10.5X15


2006 Dragster Motorcycle Killacycle Electric: 7.824 @ 168.000
Scotty Pollacheck, Engine: Advanced DC L-91 (two),


1993 Kawasaki Motorcycle Top Gas: 8.340 @ 157.900
Tony Webster, Engine: 1428 KZ, 0 Turbos: 1 Tires: Mickey Thompson


1984 Kawasaki Motorcycle Ninja 900 body Custom FRP: 8.551 @ 151.760
Kevin Askew, Engine: 1075cc Z1000, Tires: M/T & Goodyear


2000 Suzuki Motorcycle : 8.690 @ 152.000
Scott White,


2009 Suzuki Motorcycle HAYABUSA GSX-R 1300: 9.196 @ 148.750
Brad Stinnett, Engine: NOT TOUCHED, Supercharger: NO Turbos: NO Tires: SHINKO ULTRA SOFT


2001 Suzuki Motorcycle hayabusa Nitrous: 9.530 @ 142.000
Darrell Holston, Engine: 1300,


2001 Suzuki Motorcycle Mr Turbo Stage 1: 9.700 @ 151.980
Todd McKechnie, Turbos: Mr Turbo Stage 1


2005 Suzuki Motorcycle 1000: 9.845 @ 142.880
Dan Kubes, Engine: Stock, Supercharger: No Turbos: No Tires: Shinko 003


2005 Suzuki Motorcycle Hayabusa: 9.852 @ 135.270
Juan Adams, Engine: 1299 cc,


1978 Kawasaki Motorcycle kz 1000: 9.900 @ 125.990
paul '' painter'' meacham, Engine: 1170 cc, Supercharger: .............. Turbos: ........... Tires: f. avon r.goodyear..7 in


1978 Kawasaki Motorcycle 78 kz: 9.900 @ 146.000
painter meachamnone yet, Engine: pace 1170, Supercharger: no Turbos: no Tires: goodyear


1978 Kawasaki Motorcycle kz 1000: 9.900 @ 148.000
painter, Engine: pace 1170, Supercharger: no Turbos: no Tires: goodyear


1976 Kawasaki Motorcycle H1 (500cc): 10.090 @ 129.000
Jeff Anzaldua, Engine: 500cc H1 Heavily Ported!!, Supercharger: no Turbos: no Tires: 6.5 inch drag slick


1974 Suzuki Motorcycle GT750 L: 10.122 @ 129.890
Kevin Hutchinson, Engine: 3 Cylinder 2 stroke water-cooled, Tires: Goodyear 18 x 5.5


1994 Kawasaki Motorcycle ZZR: 10.210 @ 134.750
James Ogg, Engine: 600cc jeted, Tires: mich zr tires


2001 Kawasaki Motorcycle ZX-9R: 10.250 @ 140.080
Mr. J, Engine: stock 899cc motor, Tires: 190/50-17 (rear)


2004 Kawasaki Motorcycle ZX-6R: 10.965 @ 125.500
Adam Woodring, Engine: all stock 636cc, Supercharger: no Turbos: no


2002 Kawasaki Motorcycle ZZR1200: 11.080 @ 128.400
scott rising, Tires: pilot road 2


2002 Suzuki Motorcycle suzuki bandit 1200: 11.430 @ 118.751
heath murtagh, Engine: 1200,


 


©2014 DragTimes - Disclaimer