How to Rebuild a Turbo - Part 1 of 2
Rebuilding a td05h 16g turbo. This
process can be applied to many journal bearing turbochargers. :) It definitely comes in handy to
know how to do this when you are in this type of hobby.
4/25/12: Small explanation on the balancing of the rotating assembly since
I get so many comments regarding it. This particular turbocharger, td05h, has its rotating assembly
components balanced separately. This means each individual part (compressor
wheel, turbine wheel/shaft) gets balanced separately. This allows for easy
interchangeability of parts in case they need replacing. This is why I am
able to install a td05 20g wheel on this turbo without having to balance the entire
rotating assembly. THIS IS NOT THE CASE FOR ALL turboS OUT THERE. You need to research whether
your specific turbo (if it's not td05h)
was balanced as an assembly or "component balanced" like I explained above.
I hope this information helps. Good luck in your projects. Stay Boostin'
keywords: turbocharger dsm eclipse talon
awd gsx tsi fwd gst mitsubishi evo evolution lancer 14b 20g td06 td06h td05
install installation upgrade race vs Boost supra wrx sti toyota subaru Dyno laser rs rst 13g hx35 hx40
holset 18g 25g sbr t25 stock replace rebuilding big large nissan 240sx t28
Eagle Talon AWD Turbo Upgrade - Part Two
In this episode, we finish the T3 based PTE 6266 turbo upgrade on my DSM. After getting all of the
parts bolted in, we go for a road test to get the initial ECMLink tune
You can see a complete modification list and many more photos and details
Join me on Facebook at:
For more details on my DIY water alcohol injection setup, please visit
Thanks for watching!
The content provided in this video is for informational use only. Video
content is provided at the viewers own risk and the viewer will not hold
the parties involved in creating, producing or delivering this information
liable for any loss, injury, claim, liability, or damage of any kind
resulting in any way from any errors in or omissions from the information.
Thanks for understanding.
1997 Eagle Talon TSI AWD 16G Turbo 23 PSI Driving on the highway
My friend and I going for a drive in his 1997 AWD Eagle Talon with a turbo. He's running about 23 lbs of Boost making around 350+ WHP. You can hear
the waste gate open as he gets into the Boost. This engine was completely rebuilt by
the privious owner. Rear seats have been removed, as well as some of the
carpeting. A strut brace is where the seats once were. This car also
features Sparco bucket seats but no race harness :(. Exterior, mostly stock
except for a carbon fiber hood and matte black painted factory wheels. This
was filmed in Pittsburgh, PA on a GoPro Hero 3 Black Edition on 1080p
DSM vs PORSCHE
eagle talon tsi awd vs porsche
porsche gets 4 car lead still looses
16g turbo Eagle Talon Rear wheel drive runs 10's, drag race Kevin Jewer 10.9
New England Dragway September 9, 2011.
Kevin got bored with the big turbo and
decided to see what would happen swapping out his compound setup for a puny
Car normally runs 8's with other setup:
Final pass between him and Nick Stack, Nick got into the low 10's that
New England DSM.
Eagle Talon TSi AWD Turbo TD05H 20G 25psi. Vs Corvette C6 Modified Street Racing 1/4mil.
Stock 6 bolt motor / Balance shaft remove / Oil Jets remove / Stock head /
Stock headgasket only internal mods are BC 272/272 Cams / ARP head studs /
Stock Gearbox only welded Center Diff / 4 bolt rear LSD / ACT 2600 4 puck
sprung disc / Stock Suspension / Full interior / Eprom ECU /
DSMChips-Stage 3 / MAFT Translator with 3in GM MAF / Walbro 255lph High
Pressure Re-wired / FIC 1150cc Injectors / Aeromotive AFPR / Full 3 inch Exhaust system / turbo TD05H 20G T3 25psi.
Corvette C6 Modified............