I started changing the fuel pump on the wagon.. Sorry NO IN PROGRESS videos. Ill make one later about WHY I had problems with it.. Lets just say 18 years eats up stuff inside the tank. Its all back together now! It was EASY to do... (Plastic tanks are nice) The SENDER assy. was pretty rusty so I wire wheeled all the tubes and painted it. Plus I cleaned up The senders contacts so the fuel gauge is more accurate. Its like new! ITS THE 1st tank I DROPPED since the 1956 Oldsmobile Super 88 I had. On my truck I took the bed off! When the fuel pump failed.
2001 Chevrolet Silverado Fuel Pump Replacement
In this video we'll replace the fuel pump in a 2001 Silverado. These
instructions will be similar for all Chevy and GMC Trucks and full size
SUV's from 1999 - 2006. Click the link above to find the exact fuel pump we
used in this video.
Fuel Pump Replace 1984 Pontiac
The smell of gas was really strong so, I opened the hood and saw fuel
spitting out from the fuel pump so, I changed it for $20.00
It took me about 20 minutes.
Fuel Sender Installation
A customer (who shall remain nameless) sent me a fuel sender to install in
his car. Seizing the opportunity to show what can be befuddling at times
(even to me) I wasted no time in making a video on how to install one
Thanks Jim for the sender, next time send the gasket as well.
Cutting Fuel Pump Access Panel and Removing Fuel Pump Assembly - 86 Trans AM with 02 Gas Tank
Watch in HD!
Been a little while since I had any videos to share! But now I have quite
a few to edit and upload so stay tuned!
This is some shots of me making my access panel for my fuel pump in my 86
Trans AM. The fuel tank is a 2002 plastic fuel tank. You'll notice with
this combination, I dont need to cut the football field sized hole that you
need to cut with the 82-92 and 93-98 metal tanks. Its a pretty small
I make sure I radius cut the corners to keep the stress points down. I
will be making a nice cover to seal this up. I might put it in another
video, but most likely Ill do it and comment on it in another video.
Im not 100% thrilled with how the nibbler worked. I should have practiced
with it a little to get a feel for how it was going to cut. But, it
Thanks for watching!
Chevy Fuel Pump Assembly / GMC Fuel Pump Assembly
Here we have the direct replacement fuel pump assembly for the 99-04 Chevy
or GMC pickup with 2 electrical connectors on the unit. This fuel pump can
be installed with no modification to the unit or to the vehicle. The fuel
pump replacement shown here has all of the factory mounts for the
electronics and fuel lines.
Removing An Old Fuel Pump
http://www.autozone.com/autozone/parts/Fuel-Pump/_/N-8vcz2 In the fifth
installment of the AutoZone Complete Car Care - Fuel Pump Series, Bruce
Bonebrake shows how to remove an old fuel pump.
Get everything you need to do the job right at http://www.autozone.com
GMC Jimmy \ Chevy Blazer Fuel Tank Removal -Fuel Pump Replacement Instructions DIY Part 1
This video walks you through removing the fuel tank on a 2000 Chevy Blazer,
GMC Jimmy and other GM vehicles. This is the first step in the fuel pump
replacement procedure. I'll be posting a video on how to install the fuel
pump, as well as how to install the gas tank, when the order comes in.
Removing the fuel tank on a Chevy Blazer \ GMC Jimmy is not that bad of a
job. I've also posted a close up shot of how to release the quick
connectors on the fuel line. The instructions in this video will be the
same of similar on several other vehicles. I would not recommend
purchasing a cheap fuel pump, stick with AC Delco, Delphi or possibly Bosh.
I purchased a Delphi fuel pump on Amazon for $169.99 (free shipping). You
can replace your own fuel tank sending unit!