D.I.Y Installation Manual - Descendant® by WORLD Racing Turbo Kit

This video will walk you thru the process of installing a Descendant® by WORLD Racing turbo Kit for your 2008 and up Scion xB. You may also refer to this video when installing the kit for your Scion tC. Please contact one of our trained professionals if you would like any specific information. email your question to info@descendant-racing or call us at 310.533.8900 Thank you for purchasing your Descendant® by WORLD Racing turbo Kit! http://Descendant-Racing.com Now Available at http://WORLD-Motorsports.com

More Videos...


5 Things You Should Never Do In A Turbocharged Vehicle
5 Things You Should Never Do In A turbocharged Car 5 Things You Should Never Do Playlist - https://goo.gl/SxoUi7 Subscribe for new videos every Wednesday! - https://goo.gl/VZstk7 1. Do not run the engine hard after start-up. Most people know you should let your engine warm up before running it hard, but many cars only have coolant gauges. Engine oil tends to take longer to heat up, because you don’t have a thermostat like the coolant does, which isolates the coolant in the engine block and regulates its temperature. Oil that isn’t heated up won’t flow as fast as oil at operating condition, which means you’ll have less protection at engine start up. This is especially true for turbocharged vehicles, because you also have oil feeding the bearings of the turbocharger, which spins at insanely high RPM and produces significant heat, so you want to make sure you have proper oil flow through the turbo. It will be different for every car, but it could be an additional several minutes before your oil temperature is near your engine coolant temperature. 2. Don't shut the car off immediately after running it hard. You’re going to have hot spots where the engine components, and especially the turbocharger, are still significantly hotter than your engine oil temperature. If you shut off the engine, the oil no longer flows, and thus pockets of the oil are going to be heated up to very high temperatures. These high temperatures break down the oil, and also burn up and evaporate the light end of the oil, leaving behind a heavier oil that won’t have ideal flow characteristics. This reduces your engine oil life, and also means you might have less protection at start-up. 3. Don’t lug the engine. Low Engine Speed, High Load Operations. First, this isn’t ideal because you’re telling your engine to move your vehicle quickly when it’s at a huge gearing disadvantage. Second, when your engine tries to produce more power at low engine speeds, it may be able to inject more fuel, but not ingest enough air. As a result, you’ll have a highly rich mixture and this can lead to poor emissions, damaging your catalytic converter, and seeing black smoke come out your Exhaust. Third, regarding damaging your engine, this can cause low speed pre-ignition. LSPI is a when you have pre-ignition of your air fuel mixture (before your spark ignites it) and is becoming a more common phenomenon with small turbocharged engines running at low engine speeds with high load. It’s a dangerous condition that can cause engine damage, such as broken spark plugs or cracked pistons, as a result of extremely high pressures which occur due to significantly advanced ignition timing. It’s also very challenging to detect, and can’t be avoided through ignition timing or changing the spark plug’s heat range. 4. Don't use low octane rating fuel, especially if the car has been modified. turbocharged cars tend to have higher pressures and temperatures within the combustion chamber, which is why they have reduced compression ratios to compensate. If your car is modified, you can keep it reliable by running a rich mixture and using high quality, high octane fuels. Obviously reducing Boost and retarding the engine timing will do this as well, but of course you’ll be reducing performance. There are knock sensors to help minimize any engine problems, and so they’ll retard timing if it senses knock will occur. 5. Don’t floor it coming out of a corner. In this one I just wanted an excuse to talk about slip angles. turbocharged cars have some varying amount of turbo lag, new ones are much better. My point is this, as you’re coming out of a corner, your tires have some loading on them, whether your car is FWD, RWD, whatever. Now this doesn’t apply to AWD quite as much, but it’s still an issue. Your car’s stability is a result of your front tire slip angles being nearly identical to your rear tires slip angles. So long as this is true, your car moves on its targeted path. If you floor a turbocharged car, especially cars with high amounts of turbo lag, you get slammed with torque fairly surprisingly. This shock of torque increases the demand of the driven tires, increasing their slip angle. If you have a significant increase of slip angle of just one set of tires, front or rear, you end up with understeer for FWD, or oversteer for RWD. All of this is to say that your throttle application exiting the corner is very important, especially in 2WD turbo vehicles, where turbo lag can easily cause an understeer or oversteer situation. And don't forget to check out my other pages below! Facebook: http://www.facebook.com/engineeringexplained Official Website: http://www.howdoesacarwork.com Twitter: http://www.twitter.com/jasonfenske13 Instagram: http://www.instagram.com/engineeringexplained Car Throttle: https://www.carthrottle.com/user/engineeringexplained EE Extra: https://www.youtube.com/channel/UCsrY4q8xGPJQbQ8HPQZn6iA NEW VIDEO EVERY WEDNESDAY!





How To Turbo Your Car [In 5 Minutes]
In this video, the boys from Mighty Car Mods show you in 5 minutes whats involved in turbo charging your car. For more information about each stage of the process, check out these links: Part 1: http://www.youtube.com/watch?v=vUKgKt... Part 2: http://www.youtube.com/watch?v=xt0M-B... Part 3: http://www.youtube.com/watch?v=F8ZDL5... Keep up to date with all things MCM on Facebook here: http://www.facebook.com/mightycarmods Music is "Collide" featuring Erin Renee by Moog [WHITECITYLIGHT REMIX] http://www.mightycarmods.com/collecti... iTunes Version here: https://itunes.apple.com/au/album/col... Also something to note around Mighty Car Mods: we are normal guys and are not trained mechanics. We like to make interesting car mods and show you how we've gone about it, but we can't promise that anything we show you will work for your particular car, or that you won't harm yourself, someone else, your car or your warranty doing it. Please be safe, be responsible and unless you know what you're doing, do not fool around with very serious machinery just because you've seen us make it look so easy. Talk to a qualified mechanic if you are in any doubt.





How To Install A Dry NOS Nitrous Oxide System
This NOS video demonstrates how to install a typical Dry NOS Nitrous oxide system. A Dry NOS system delivers Nitrous oxide to the air intake tube of your engine, while the vehicle's fuel system provides the added fuel. The video demonstrates how to locate, drill and tap the OEM or an aftermarket intake for the NOS nozzle.





Small-Block Turbo Kit for $699! But Does it Work?
http://www.hotrod.com/articles/build-blow-carb-less-50/ You’ve read about them before, probably seen one at your local dragstrip, and have maybe even pondered buying one. Before you do, HOT ROD brings you the truth, the whole truth, and nothing but the truth about cheap turbo kits.




Follow