2009 Honda Accord v6 - Fujita Cold Air Intake

Honda Accord coupe v6 w/ Fujita's CAI Going uphill on a freeway ramp.. Sorry for the bad quality. It was recorded on my camera phone. I will get more videos with better quality soon. Type &fmt=18 after the link for better quality... :/

More Videos...


2008-2012 Honda Accord V6 | Takeda Short Ram Intake before and after install
Here is a quick video showing the before and after effects of installing a Takeda Short Ram Intake on a 2008 Honda Accord V6. This mod was done on a coupe but it is also available for the sedan. There is not much of a noticable performance gain from this modification, but the sound of the intake makes this mod very worth while! It makes the car sound very aggressive when on the throttle hard but does not sound any different under normal driving conditions. Check out my other modifications in the video section of my channel. *** NOTE ***: The check engine light fixed itself after the computer relearned the new air flow.





K&N Cold Air Intake Install (2008 Honda Accord V6 Coupe)
We install the K&N intake on my 2008 Honda Accord!





Cold Air Intake with Blow Off Valve - Sound Test
CPE CAI - Homemade DIY Cold Air Intake with Blow Off Valve - Mazda cx7 -Sound Test Engine light is on for stuck EGR valve. fixed using seafoam. Melted out the stock MAF socket with a soldering iron. Purchased K&N air filter and placed it on the end of the tube. just that easy. This is a Mazda cx7 GT 2.3 L MZR turbocharged I4 with 244 bhp and has an internal blow off valve to regulate engine psi. The blow off valve sound is hidden while using the stock setup. After the modification the internal blow off valve can be heard. PriorToImpact Prior To Impact





2008 honda accord 3.5L coupe dyno run on 20'S
tested the car out after putting after market mufflers (which will be changed to magna flows) cold air intake, and a lighter pulley. Came out to be 198 whp, which i thought would be more....




Follow