Drag Racing 1/4 Mile times 0-60 Dyno Fast Cars Muscle Cars

302 powered chevy nova

it wasnt the fastest thing ever but it was fun, my 302 chevy powered 64 nova, 1st part of the video is back from 05 when i was running 13.00-13.50's the 2nd part of the video is from 2008 and my best was a 12.53 @109 mph. at 1:18 it switches over to 2008. the 1st race form 08 you will see is me vs the red Mustang that was the trophy round. we both redialed i dialed from a 12.70 to a 12.68 and i ended up running a 12.70 the tiny chevy was victorius then the next race was the 20th of septmber i sucked, brokeout 1st round redlit in the 64 car shootout oh well, racing is coming up in may time to go racing again! and no, i dont have slicks in ay of the shots. not bad for running mid 12's with consistent 2.0-2.3 60 foot times WOW! gotta thank my sponsors, here they are in no particular order feel good ink, best tattoo shop in spokane, tell them you saw their name on my car!!! stylin works decals look em up in spokane wa! ask for allan tell him you saw the yellow nova and scooter sent you! billy from, good-guys towing the 6-pack racing team of randy and evette lerch they run in the modifed classes of roundy round land the entire sobdvd crew! www.sobdvd.com they make some badd as videos including the one your watching. tobys battery and auto electric the tranny shack, ask for perry tell him scooter sent you! DAD ! couldnt of done it without you man, the tools the support the knowledge, thank you. MOM miss you alot R.I.P 12-21-55 12-22-05 DAVE of the chevy store jeff cassell of cassell engines bill the portmaster lane and landon from reiners automotive ron of rons hotrod and custom autobody and of course my friends, austin,craig, zach, for the bad ass help at the track laying down vht lashin valves whatever the hell needed to be done got done. THANKS GUYS!


 


More Videos...


DZ 302 4 speed 8000 RPM
dz 302, AirFlow Research heads, big roller cam,4 speed G-Force trans. 12 bolt, 4:88 gears,





drag racing crashes
Drag Racing crashes from all around the world, mainly NHRA, ANDRA, IHRA. Disclaimer: I do not own the music and picture used in this video. All credits belongs to their real owners. No copyright infringement intended. Intro music created and composed by "Nick Phoenix / Thomas Bergersen - Heart of Courage (Choir)-Extreme Music/2 Steps from Hell" Music played by Charlie Parra del Riego, so check his channel out. https://www.youtube.com/channel/UCdrKuOS3tBgI-kwq-QPkGtw





This is a 302 cu in SBC Z28 engine in action...
I've borrowed this from 'pepsikatt' It gives an idea of what the car should sound like. Hopefully...





INSANE DRAG RACING CRASHES AND WHEELSTANDS
Taken from Carnage Fest 2 DVD, Check out http://www.urbanhillbilly.com for the best in Heads Up Drag Racing video and DVDs. Urban Hillbilly Action Videos Drag racing, wheelstand, crash, and saves. Pro Mod, Outlaw 10.5 Drag radial.





Truck Fest 2013: Smokey Big Rigs Burnouts & Drag Racing Revealed
( http://www.TFLtruck.com ) When you think of a Big Rig Semi...you probably don't immediately think of drag racing...or do you? This weekend at Bandimere Speedway just outside of Denver, Colorado hundreds of Big Rig Semi trucks lined up on the drag strip to see which one is the kind of the mile high drag strip and which one is the fastest mile high pickup dragster. Can a big rig run a sub 20 second quarter mile? You bet. Can a big rig run a sub 15 mile....no problem. Can a Big Rig run a sub 10 second time? You'll have to watch the video to find out. In another fun and informative TFLtruck video we see what happens when the Big Rig Semi Trucks line up behind the Christmas Tree. Check us out on: Facebook: ( https://www.facebook.com/tfltruck ) Twitter: ( https://www.twitter.com/tfltruck ) and check out our car videos on YouTube at: The Fast Lane Car ( http://www.youtube.com/user/romanmicagearguy )





Top Fuel Nitro Motorcycle Import vs Harley - Larry "Spiderman" Mcbride 5.83et @ 232mph
Dragbike Live was on location at the Manufacturers Cup Finals held November 12-14 2010 at South Georgia Motorsports Park in Georgia when Top Fuel Nitro motorcycle legendary drag racer Larry "Spiderman" Mcbride against V-Twin Top Fuel Harley rider Tommy Grimes aboard the Ray Price Top Fuel Nitro entry met in the final round. Mcbride ran an incredible 5.830 elapsed time at 232.75 miles per hour for the win! This was a historic final round,marking the first time a V-Twin Top Fuel Nitro burner would face off against an import Top Fuel Nitro Methane injected drag bike.





Quick 62
First pass in new race car





1990 - Part 15 Best of Famoso Raceway Vintage Pro Mod Nostalgia Drag Racing Bakersfield, CA
Drag Strip Riot Posters! http://www.maziracing.com/2004poster/ 1990 Vintage Pro Mod Drag Racing, Part 15 Best of Famoso Raceway Drag Racing; Pro Mod drag racing, in-car video of Tom Jacobson, 1962 Chevy Impala, Bakersfield, California. Vintage Famoso Raceway, Nostalgia Drag Racing, Pro Mods, A/Gas, Nitro Top Fuel Dragster, Funny Cars, Crash, Funny Car body explosion, Auto Club Famoso Raceway, Bakersfield, California. Brought to you by http://www.dragstripgirldesigns.com





Jerry Macneish, 302 stocker, 10.73 @ 123 MPH
Jerry MacNeish, Small Block Chevy, 302 1967 Z/28 stocker, 10.73 @ 123 MPH





one badass sbc chevy 350 2008
SBC 30 over 202/160 steel heads blue racer cam and yes there is no water pump but we are running water through the block with a garden hose...thats where the steam is coming from @ the end of the video So let me explain a little something to everyone that thinks they know what they are talking about I am no longer building any REBUILT standard / stock 350's Key word Is stock standard 350. I am only building NEW 383's and up YES i know a 383 is a 350 block using a 400 crank...This is the old school poor man method...which yes I have done and still do on occasion. But I start now with a brand new DART block a New EAGLE 383 crank and rods and I have been using Dart Pro comp or to save you some money NKB heads. I sell the motors complete carb to pan with Intake Distibutor coil wires water pump fuel pump alternator pullys flexplate starter power steering pump plugs filter and oil all your brackets and sheet metal Turn key just add 12 volts a ground and some gas and you ready to go.Turn key crate engine stage 2 starts at $5,000 @ 500 HP we also build 406 , 421 , 427 . 434 SBC @ 625 HP and BBC starting @ 505 Cubic Inch 555 and the popular 572 BBC @ 725 HP ALL BLOCKS HAVE SPLAYED CAPS any questions email thank you





63 Nova drag racing
MY 63 nova making a few passes.





Looking at my Chevy 383 Ported "Revised" Pro Comp Aluminum Heads rat rod sbc
I was asked what I do to port a set of Revised Pro Comp heads. There are so many things to touch upon but I'll just mention what I did on these to be quick. A little about me,,I've been building engines for 30 years now. I've been porting heads about 20 years. I try to keep up with whats going on and I continually study online. I buy new books and engine building software(Desk-top Dyno/Dragstrip,etc). I'm impressed with the software results. Anyway,,When I saw these heads online I wanted to see just how they stacked up to Darts,Brodix,Edelbrock,etc. I had also read where people were bashing them. Some said they were cheaply made castings, others bashed 'em because they're made overseas. Then later they re-emerged as "New & Improved". I have a friend that sells them online and he built up a 383 and we ported a set and they did very well,,especially for the {lack of) money. When I first looked at 'em I didn't like the areas in the ports that are under the valve seats. I point out the areas at the start of the vid. There are small areas under the valve seats that are noticably machined away. It's nothing to be concerned with as none have ever failed that I know of. There are great photos online that show these heads aggressively CNC Ported,they're so huge that the Intake Ports run into Int bolt hole bosses(I can email you the pics if you need them). Thats too big as they'll have to run sleeves in the mounting holes. Something that I recommend too is to look at the ports online of the major manufactuers of racing heads,,or if available look at ones being built at a local machine shop. When I port a set of heads I make a thickness gauge out of coat hangers. When finished it looks like an "X". It accurately reflects how thick the metal is while porting so that you don't go too far and it helps to get ports consistent ( I'll add that 'how too' later). One unusual thing that I do is lap the valves to the seats with an electric drill motor. It's reversible and takes just a second for each valve and seat to show the correct "grey ring". It takes about 3 minutes to do each head. The results are outstanding with the seats showing concentricity. Most local machine shops just cut the valves, then the seats,,then assemble them. If you do the solvent test they usually leak,,sometimes badly. Thats cylinder leak down,,less power,smoking,blow by,etc. So you get what you pay for. What I mean is that I ALWAYS disassemble the stuff at home and inspect the work. When I find a problem I take it back to the machine shop.Most machine shops don't like a guy who knows how to inspect the work. A good machine shop is really hard to find not just the work but the people there. I know of a few local machine shops in central Arkansas that will do bad work for one customer and great work for another intentially.A lot of times they're racing rivals. Remember, when you get crappy work and run it ~ it'll run crappy or not work,,or last very long. So when you take the stuff apart at home you can see who your friends are. I think it's important to spend your money where the quality of the work is at the forefront of the business.Thats why I drive to a good place with modern machines and trained people. You can have an intelligent conversation and get what you ask and pay for. One more thing,,Try my drill method for lapping the valves,,it works really smoothly.Second thing,,the old notion of polishing the ports has been proven wrong scientifically,especially on the Intakes. They need a slight texture,,look up why.Too much to go into here. Theres even guys who epoxy pebbles or marbles on the bottoms of their racing boats to ride more on air,,reducing friction. On the motor,, I'll start the engine in the next few days and then later toss it into an 86 S-10. It'll have an old school turbo 350 with shift kit and an old Vega Stall Convertor. I can port a set of these heads in a day and a half for about $300.oo The Iron stock type heads are harder and take more time and cost a little more. I've ported about 30 sets now and got to run half of them and got to see how they do. Porting works! and makes quite a difference. Thanks for looking.





Bad BLOWN Nova Drag Car Cold Start 14psi 650+hp
My Pro Stree Nova. Has been featured in magazines and has pulled record Dyno numbers for sbc w/steel 882 heads. Titanium valves, roller rockers, full port job, etc. etc. Check out my channel to see more! https://www.facebook.com/tinman2kustoms https://twitter.com/Tinman2Kustoms





CHEVY SMALL BLOCK 1965 283 SBC DYNO SESSION
THIS IS A 1965 CHEVY SMALL BLOCK 283 THAT WAS DynoED BY BAKERSFIELD CRATE ENGINE.





1968 Chevy Nova Drag Car Mopar Nationals 2007 at Santa Pod
Victoria Highams 1968 Chevy Nova




Which car is faster? Which Car is Faster?





Similar 1/4 mile timeslips to browse:

1966 Chevrolet Nova ss: 6.270 @ 223.000
mikael nord, Engine: keith black 426, Supercharger: Lysholm screw Tires: mickey thompson


1968 Chevrolet Nova : 6.983 @ 199.260
KOLBRICK, Engine: 706 cheve,


1967 Chevrolet Nova Super Sport: 8.020 @ 175.000
Trevor Vickers, Engine: 427, Supercharger: F3R Pro Charger Tires: 15X32X14


1963 Chevrolet Nova : 8.090 @ 173.000
Randy, Engine: BBC, Tires: 33X10.5W


1966 Chevrolet Nova : 8.390 @ 160.000
Tony Reddix, Engine: 428 in sbc, Tires: 275 x 60 M/T Radials


1969 Chevrolet Nova SS: 8.421 @ 167.000
Peter Kaldy, Engine: BBC 468, Supercharger: - Turbos: - Tires: Hoosier


1969 Chevrolet Nova coupe: 8.541 @ 167.890
Jonny B, Engine: 555 cid bbc, Supercharger: no Turbos: no Tires: m/t front goodyear d3 in rear


1967 Chevrolet Nova Chevy II: 8.551 @ 157.899
Russell Jackson, Engine: short deck 482, Tires: Goodyear 14.5 X 32


1966 Chevrolet Nova : 8.590 @ 157.000
Frankie Muscia, Engine: 598 BBC,


1966 Chevrolet Nova SS: 8.621 @ 154.950
Harold Stover Jr, Engine: 555 bbc, Supercharger: n/a Turbos: n/a Tires: Goodyear D5 1984


1966 Chevrolet Nova SS: 8.680 @ 156.000
Chris Yates, Engine: 434, Tires: M/T ET Street 13/31


1972 Chevrolet Nova ss: 8.720 @ 155.200
barry ginter, Engine: 377 ci sbc, Supercharger: F-2 procharger Tires: M/T 33-15-15


1971 Chevrolet Nova ss: 8.761 @ 158.280
Pete Llamas, Engine: 565 BBC, Tires: m/t et street


1967 Chevrolet Nova SS: 8.837 @ 150.550
David Kolenda, Engine: 502, Supercharger: B&M420 Tires: 16 x 33 x 15


1969 Chevrolet Nova ss: 8.870 @ 148.180
Burke a. Chaisson, Engine: 540 c.i. bbc,


1972 Chevrolet Nova 588ci: 8.881 @ 153.160
Jeff Mill, Engine: 588ci - N/A BB Chevy, Tires: MT - ET Front Runners & MT 29.5 10.5W Slicks


1965 Chevrolet Nova 2 Dr HT: 8.919 @ 152.677
Greg Means, Engine: 360, Supercharger: Hall Bros 6-71 Tires: 32x14.5 Goodyears


1972 Chevrolet Nova ss: 8.920 @ 152.920
barry, Engine: 377 ci sbc, Supercharger: procharger F-2 Turbos: n\a Tires: m/t 32x14.0-15


1972 Chevrolet Nova 2 dr coupe: 8.960 @ 152.150
gary federico, Engine: 516, Tires: hoosier 14.5x32


1968 Chevrolet Nova SS: 8.975 @ 147.450
Bill Moore, Engine: 588 BBC, Tires: 33x16x151


 


©2014 DragTimes - Disclaimer