www.011racingteam.com - 011 Racing Team presents - building the 1200BHP Subaru Impreza EZ30 Twin turbo. Car has been built over the course of 10 months, including all necessary chassis work, engine and transmission build, and all other necessary mods, including final mapping and initial try-outs.
Engine and mechanicals supplied and built by RA Motorsport, Perth, Scotland.
Stay tuned for new videos featuring the detailed spec of the car and first race trials and measured times.
Quickest Subaru WRX 4-cylinder AWD
The Tony Rigoli Performance crew are well known for tweaked EJ20 series engines. This WRX still retains the factory chassis but a mini tubbed rear end retains a 4WD driveline. Going 8.41 at 161mph the car's best time is 8.34 over the quarter mile.
Footage is from June 2006
600WHP Subaru Impreza STi - Anti Lag and Cyclic Idle in Car Demo
Just put some finishing touches on tuning the anti lag to make it smoother. Flipping the switch opens throttle plate 20% and engine runs on cyclic idle @ 1,700rpm. When I step on the gas and engine rpm exceeds 3,000rpm and 30%+ throttle plate opening, anti lag is on. If engine rpm is under 3,000rpm for 5 seconds or more anti lag turns off and goes back to cyclic idle until I flip the switch off.
At idle with anti lag on it's about 1-2psi Boost at 2,700rpm. Free revving it up I can reach 5-10psi with no engine load.
BEFORE anyone asks how you get it and if you want it. Anti-lag is EXTREMELY hard on the engine. You would need forged pistons, and built heads at a minimum. The valvetrain takes a beating so inconel/super alloy Exhaust valves would be a must as long with aftermarket valve springs. Also you're going to need a STRONG header. Explosions are going on in there.
Mitsubishi Lancer Evo IX MR 870+Ps@11.000rpm (Boost 14psi)
Rare, beautiful and extremely fast Lancer Evo IX MR that develops 870+Ps running on Pump gas and low Boost of 14psi!
For the full article, photos and tech specs of the car visit:
Dj Kas - Requiem for a Dream (Dubstep mix)
Canon EOS 60D, Panasonic HDC-SD 700, GoPro HD Motorsports Hero
Follow us on Facebook:
Grandparents reaction in WRX
Took my grandparents for a ride in my WRX and thought it would be cool to capture their reaction, turned out better than expected.
See the sequel with more speed, more turns, more safety!
Subaru STI - 600WHP Quick and Dirty Launches
Just some quick launches in the car. Boost set @ 23 psi
Roll bar camera mount got a little loose after a while. Have to tighten it back up.
Blow off valve: Tial Q (before any more people ask)
Don't forget to subscribe! :)
How to build a BMW M3ti in 7 minutes
In just over 7 minutes, using parts from http://www.AutoWerksofAmerica.com and a wrecked E36 M3, Robert Phelan of http://www.photomotiononline.com turns his BMW 318ti into a fire-breathing M3ti or 318tiM or 332ti. Whatever you call it, its cool, its fast and its fun!
Whether as radical as this build, or as simple as a tune-up or brake pads, you too can do it with OEM, aftermarket and performance auto parts from http://www.AutoWerksofAmerica.com.