Turbocharged Grand AM PT.2
Video/pic collage of my turbo ga...most
of this you may have already seen, just so you can hear my car unlike the
first video I made... currently down rebuilding transmission and doing
valves and valve springs atm, checking pistons/rings/ doing bearings on
bottom end and whatnot possibly stage 3 turbo cam.
Turbo Grand AM GT Car Update
I haven't done a video in awhile to update you guys on what im doing or
dealing with. If you know why I would be getting code 1626 please chime in.
I've checked all my fuses and none of them are blown, even changed them to
make sure.. Open downpipe/external wastegate is pretty loud.
Grand AM GT turbo 3400 12.3 pass
This is the first track day for our 1999 Pontiac Grand Am GT racecar. This
pass was a 12.3, with a 1.78 60' ft. To learn more about this car, or to
contact us for your 3400 turbo kit,
1999-2005 grand am window regulater repair-JoeTheAutoGuy
this is a video of how to repair the window regulator , on this model it is
very common on the plastic slides to crumble allowing the cables to move
without the window or have the window drop. this is mainly a video of the
dismantling or replacement on the grand am oldsmobile intrigue
Please like and subscribe......
supercharged 2000 grand am dyno 298hp
My supercharged 2000 grand am gt on the Dyno. Final pull was 298hp
262ft/lbs torque. Magnacharger kit using gen4 eaton M62 blower
(discontinued). Check my cardomain http://www.cardomain.com/ride/2386767
Way too many mods to list here.
my Grand Am GT 3400 Supercharged - 1st gen RSM Supercharger Kit
Supercharged with one of the first RSM kits to come out.
PCM is only programmed by RSM and uses no MAF. MAF is not installed.
This is a 1999 motor I swapped after blowing 2 pistons in the original 00.
Supercharger is driven by a long
driveshaft. The downward pull on the pulley creates a slight bowing inside
and occasionally shears the bolt connecting the shaft to the SC. I have had
this shaft on and off over twenty times. Sometimes it lasts a while and one
time it broke twice, the same day. The keyway has been worn down from these
bolts breaking and another keyway may eventually need to be machined. I got
it machined for 50 bucks last time.
Transmission has an LSD installed ;)
Serpentine Belt frayed on one side (at time of video)
Custom Bent Exhaust by Redline which
was in Wildwood, PA.
Its always nice when some tuner kid turns his head when he hears the
blowoff valve or spooling when cruising
RK Sport Spoiler
Both strut mount bars
I never had a video camera when I used to race it. I also never got into
Youtube til years after I had the time to race. These are some pics from at
the Flashlight Drags.
Lowrider Grand Am GT vid: http://www.youtube.com/watch?v=PLBMcc8ofvU
How To Install Replace Door Panel Pontiac Grand Am 99-06 1AAuto.com
1A Auto shows you how to remove or replace the interior door panel trim on
your vehicle. You need to remove the door panel for a number of different
repairs, for example door handles, window regulators, power window motors,
door locks and more. This video applies to the Pontiac Grand Am, years 99,
00, 01, 02, 03, 04, 05, and 06
2005 Grand AM GT vs. Mustang
My Grand Am against a Mustang at Mason Dixon dragway. Sorry
the camera shut off before the boards lit up. I ran a 15.4 I think, but I
have no idea what the Mustang ran. Only mod at the time was
a K&N filter in the stock ram-air box.
I see a few of you hating on the Mustang driver for racing a slower
car, it was just a coincidence that we got paired up together. I never even
talked to the guy, let alone challenge him or anything.