Drag Racing 1/4 Mile times 0-60 Dyno Fast Cars Muscle Cars

LOW RISE HYDRAULIC CAR LIFT

LOW RISE HYDRAULIC CAR LIFT MANUFACTURING & CONTAINER LOADING


 


More Videos...


Strongman Tools - Hydraulic Scissor Lift
Strongman Tools - Scissor Lift. ELECTRO HYDRAULIC SCISSOR LIFT Capacity: 2.8 Tonne Lift Model: SL2800 Price: £1000 (Exc. VAT) Delivery Cost: Approx £65-90 for most of England but please call for other areas. Stock Item: Yes In Stock: Yes -Excellent value & very useful mobile car lift -Scissor action -Works off domestic 240v supply -Can be placed under cars or driven onto -CE Approved -Lift capacity 2.8 tonnes -Lifts to 1.2 metres in only 30 seconds -Small footprint when folded (2.1m long x 1.08m wide -Fail safe locking device (requires separate compressor which we can sell new or 2nd hand) -Quiet operation (under 70dB) -Full range of spares -Full manufacturers guarantee -We have these regularly in operation so call for a demo -Packed in 2 wooden boxes, 315kgs 1.8m X1,1m x 0.300 & the smaller 90kgs www.strongmantools.co.uk





Portable Car Lift Unboxing & Review Part 1 - EZCarlift
Car garage lift that fits any residential garage. Save up to 25% off the EZCarlift at http://www.gotogroupbuy.com keyword "EZCarlift".





LIFTING GARAGE 4 FEET HIGHER
I raised my entire garage 4 feet to fit my new boat. I did not blow out the roof. I lifted the entire structure then set a 4 foot tall cripple wall underneath the original sill plate. Took about 10 days by myself to do the job. You have to lift about 1/2 per round, then reshim and loosen steel cables a bit by turnbuckles. The steel cables are needed to keep everything from moving around while raising the load. This is NOT for amateurs who have no experience in this line of work but can be done cheaply and with only 1 person working and another (spouse/friend) watching over you for safety reasons.





Jema Autolifte A/S - Denmark - Scissorlift
Autolift - Scissorlift - (JA2700S) 1. 2700 kgs maximum lifting capacity 2. Double scissor action 3. 2 cylinder synchronization 4. 14 Step automatic safety locks, manuel release 5. Easy to move, safe liftning 6. Powder coat finish 7. Higher performance 8. Low profile 9. Economize spare space Manufacturer: Jema Autolifte A/S - Denmark •For sale : Autolift •Production year # : 2010 •Product number : JA2700S Tec. Specifications•Working noise : : 65Db •Transmission : Hydraulic •Electric power : 220V •Rise time : 40 sek. •Drop time : 50 sek. •Working temperature : -5 to +40 •Motor power : 2.2Kw •Max lift : 2700 kg. •Lenght : 1525 mm •Height : 1200 mm •Width : 1016 mm •CE approval : Yes •Safety lock : Yes •Colour : Blue and white •Year : 2010 •Guarantee : Yes Jema Autolifte A/S are here to help you if you need a new Autolift. Look at our product range - Everything to competitive prices: Scissor lift - 4-Posted lift - 2-Posted lift - Jack - Tyre changer - Wheel balancer The best and cheapest lifts in Europe! We specialise in producing quality lifts for garages all over Europe, give us a call and lets have a chat, we mite help you! Or we can send you a brochure with specifications and prices. Best regards Jema Autolifte A/S Phone number:: (+45) 48180300 Fax: (+45) 48195240 http://www.jemaautolifte.com E-mail: info@jemaautolifte.dk





Trans kar 2
How to load cars into containers





MaxJax Car Lift
For more information: Call 1 (877) 432-6627 or go to http://www.maxjaxusa.com. The MaxJax is a 6,000 pound capacity car lift that sets up in minutes and uses recessed anchors to bolt to your floor. It's a portable two-post lift that is designed for standard low-ceiling garages or automotive shops and has the ability to stow away when you're done!





Setting up a Car Lift
Setting up a Car Lift in a home garage. For more information please visit www.carlift.ca





Teeter-Totter Car Hoist
For a FREE issue of Farm Show Magazine, go to www.farmshow.com Facebook: https://www.facebook.com/FARMSHOWMagazine Twitter: https://twitter.com/FarmShow "It works perfectly. If I were going to build another one I wouldn't change a thing," says Bruce Ogram, Elmira, Ontario who built an ingenious "teeter totter" drive-up ramp for car and truck maintenance that does the job of expensive hydraulic hoists but has the advantage of total portability. Ogram wanted to work under cars and trucks but he didn't have a good spot to build a permanent ramp. Also, he wanted to use the ramp to clean the undersides of vehicles with a high pressure washer and then to apply undercoating, and he wanted to be able to do that messy work in an out-of-the-way spot. The unique "teeter totter" ramp he built is 30 ft. long and pivots at a point 17 ft. from the lower ramp end. The car or truck drives up the ramps, made out of 10-in. wide I-beams, and when it passes the pivot point it over-balances the ramp and drops it to the ground. The fall of the ramp is cushioned by 20-in. truck tires. When the vehicle backs off, the rear end drops to the ground, also cushioned by tires. "There's only a mild bump when it drops to the ground because if you drive slowly across the pivot point it'll drop slowly. The tires help cushion it as does the suspension system of the vehicle," says Ogram. One of the I-beam tracks is anchored solidly to the ramp frame while the other track slides back and forth to fit varying wheel spacings. It'll narrow up enough to accommodate a garden tractor. The main support legs are made from 61/ 2 by 8 by 3/8-in. H-beam. The top end legs are made from 2 1/2 by 10-in. channel iron. Bracing consists of 2-in. dia. pipe with flattened ends welded to the legs with 1/4-in. thick flat iron gussets. On the left side as you drive up the ramp there's a 2 by 6-ft. catwalk and ,,a ladder that swings out to dismount from the vehicle. When a vehicle is in the raised position, it's approximately 5 ft. 6 in. above the ground. It could be built higher or lower as desired, says Ogram. A 13-ft. by 10-in. I-beam serves as the pivot point, and it also slides out for use as the tongue for transport. The pivot beam is fitted with small cast iron wheels so it can be rolled from the pivot to the lower end of the ramp to be put in place for transport. Moving and mounting the tongue is an easy one-man job with the use of hydraulic jacks. There's a low railing along each side of the tracks - 6 in. above the bottom of the track - that keeps the tires on track. A strip of expanded metal grating laid into each track provides good traction even when wet or covered with snow. A 6-in. piece of angle iron across the end of each track acts as a "stop,,. To get onto the ramp, two hinged 4-ft. long, 10-in. wide channel iron tracks extend to the ground from the bottom of the ramp resting on the truck tire cushions. "We've taken the ramp on the highway pulling it behind our Ford Econoline van. Transport width is 8 ft., 6 in. We had no more problem than pulling a load of hay," says Ogram, who says the ramp weighs 5,865 lbs. although it's balanced so that tongue weight is no more than 115 lbs. Total cost of construction was $1,162.68, using mostly scrap materials, and it took 177 hrs. of shop time. The biggest vehicle Ogram has driven onto the ramp is his Ford van but he says it'll handle bigger pickups and trucks.





مكنة تعبئة رقائق البطاطس عن طريق الوزن filling machine
http://www.adenmed.com مكنة تعبئة رقائق البطاطس عن طريق الوزن potatoes chips weighting filling machine





Portable 4-Post Parking Lift
Caster kits Manual lock release Oil-drip tray Durable power unit For details and $$$, please contact gronhiequip@gmail.com Gronhi Garage Equipment/China presents





PlastiDip a WHOLE CAR - How-to by DipYourCar.com
DipYourCar Pro Car Kits sold here: https://www.dipyourcar.com/home.php?cat=15 For High Res Pics of finished product visit www.dipyourcar.com Fonzie from DYC shows you how to plasti dip your entire car. Step by step instructions using the DYC.com Pro Car Kit. Smooth finish, easy masking, all help included. Matte black audi s4 with glossifier on the wheels PlastiDIp is 100% removable, long lasting, and has zero affect on the car's OEM paint and clear coat.





Loading BMW 530d Into 40ft Container
This show how my BMW was loaded into a 40ft container to be shipped back to Malaysia. Special thanks go out to our friends in Cardiff Keluarga that helped us load our personal effects and the car into the container.





MaxJax Installation Demo for the BMW X5
The MaxJax Portable Two Post Lift is very unique. This garage lift is perfect for low-ceiling garages and shops. It's also a car lift that easily stores away when not in use and sets up in less than 15 minutes when you need to do a quick oil change. The MaxJax was created by Dannmar to provide it's customers with convenience and portability. For more information about the MaxJax, visit http://www.maxjaxusa.com or http://www.dannmar.com





Hydraulic Tractor Lift
I just got this Hydraulic lift. Going to be lifting whole tractors when I finish the new attachment for it.





Hydraulic Car test drive
Purdue senior design project done by Mechanical, Electrical, and Computer Engineering students during spring 2008. The car moves by using hydraulic pressure and is remote controlled.




Which car is faster? Which Car is Faster?





Similar 1/4 mile timeslips to browse:

2006 Mercedes-Benz CL65 AMG RENNtech: 10.274 @ 137.460
SGC, Engine: Stock, Supercharger: n/a Turbos: Stock Tires: Mickey Thompson Drag Radials


2005 Mercedes-Benz CL65 AMG Speedriven: 10.725 @ 128.080
V12Godspeed, Engine: V12, Turbos: stock


2006 Mercedes-Benz CL65 AMG VRP: 10.730 @ 130.860
Marko, Engine: stock, Turbos: stock Tires: 315/30/18


2006 Mercedes-Benz CL65 AMG VRP: 10.760 @ 129.280
Marko,


2005 Mercedes-Benz CL65 AMG : 10.790 @ 127.320
RaceHorse, Engine: stock, Supercharger: n/a Turbos: stock Tires: 265/40/18 Mickey Thompson


2006 Mercedes-Benz CL65 AMG VRP: 10.825 @ 129.790
Marko,


2006 Mercedes-Benz CL65 AMG : 10.930 @ 128.040
SGC, Engine: stock, Turbos: stock Tires: M/T Drag Radials


2006 Mercedes-Benz CL65 AMG VRP: 10.970 @ 129.000
Marko,


2006 Mercedes-Benz CL65 AMG RENNtech: 10.980 @ 127.070
SGC, Engine: stock, Supercharger: n/a Turbos: stock Tires: Drag radials 265 40 18


2005 Mercedes-Benz CL65 AMG amg: 10.980 @ 126.580
johnny icebags, Tires: 245/18 mt dr's


2005 Mercedes-Benz CL65 AMG : 11.100 @ 125.000
johnny icebags, Tires: 245/18 mickey thompsons


2006 Mercedes-Benz CL65 AMG RENNtech: 11.180 @ 125.080
SGC, Engine: stock, Turbos: stock Tires: 265/40/18 Drag radials


2005 Mercedes-Benz CL65 AMG : 11.209 @ 123.700
J. Wade (Tom C), Tires: M/T Drag Radials 265/40R18


2005 Mercedes-Benz CL65 AMG : 11.237 @ 124.000
Jason Wade/Tom C, Tires: BFG DR 275/40/18


2002 Honda VTX 1800 cc: 11.366 @ 115.620
Big Steve,


2005 Mercedes-Benz CL65 AMG : 11.370 @ 122.600
johnny icebags, Tires: 245/40/18


2005 Mercedes-Benz CL65 AMG : 11.403 @ 121.590
J. Wade- Tom C, Tires: Drag Radials


2005 Mercedes-Benz CL65 AMG : 11.499 @ 119.570
Tom C, Tires: Drag Radials


2005 Mercedes-Benz CL65 AMG : 11.510 @ 120.200
Anthony Wheelus, Tires: MT ET Streets 265/40-18


2005 Mercedes-Benz CL65 AMG : 11.532 @ 120.320
V12Godspeed, Engine: V12 TT,


 


©2014 DragTimes - Disclaimer