2010 National Sport Trac Meet
2010 National Sport Trac Meet - Put on by the MySportTrac.com website!
2010 Meet was held on July 15-16 in Louisville KY. Go to
www.mysporttrac.com for details.
We toured the Louisville Assembly Plant during the last year's run of the
Ford Explorer Sport Trac and talk with Ford officials! We also enjoyed
lunch at the plant and had a friendly show and shine competition at Huber's
Farm outside of Louisville. A 0ne hour 20 minute DVD of the two day event
is available at mysporttrac.com
Patrick's 01 Sport Trac on Mutiny Ridge
Patrick in his 01 Explorer Sport Trac running Mutiny Ridge at Gulches ORV
Park. Truck has 3" suspension lift, 3" body lift and 35 KM2s. No lockers or
Ford Explorer 4X4 Front Hub & Bearing Repair
In this video I go over replacing the front hub and bearing on the Ford
Explorer line of vehicles from start to finish. This bearing is common for
abs codes but more common for a grinding and or humming noise.
Hub and bearing 15mm bolts- 90ft lbs
Caliper bracket- 125ft lbs
Axle Nut- 185ft lbs
Lug Nuts- 100ft lbs
1927 Ford: Double-Trouble -- /BIG MUSCLE
• Gordon Tronson
In the world of hot-rodding there are few cars that are going to leave as
big an impression as this - the 1927 Ford Model T custom simply known as
"Double-Trouble". It rides on a custom-built tube chassis that's fabricated
from 1.5-inch tube. Is powered by two 4.6-liter modular V8s from Ford with
four, count 'em, FOUR Superchargers for
an approximate power output of around 1,200 hp. It also utilizes the
rear-end (inboard disc brakes and all) from an early Jaguar. It's a rolling
a Hot Wheels car and a masterpiece of engineering that is sure to make all
your naughty bits tingle.
How To Clean A Ford MAF Sensor - Simple & Effective
Cleaning a Ford mass air flow sensor. This procedure should work on most
Ranger Mustang Taurus F150
etc. from the 1990's and 2000's. After doing this, my truck performed much
better. Smoother running, and more responsive. I used paint thinner and
denatured alcohol with a cotton swab.