Drag Racing 1/4 Mile times 0-60 Dyno Fast Cars Muscle Cars

Mattel Hot Wheels 69 Dodge Coronet Super Bee Diecast Toy Car - Auto Racing Toys Cars Collection

**RATE/FAVE/SHARE** Hi Hot Wheels fans and YouTubers today I will be showcasing the Hot Wheels '69 Dodge Coronet Super Bee Diecast Car by Mattel Toys! The '69 Dodge Coronet Super Bee (desgined by Phil Riehlman) is a Hot Wheels casting based on the production car of the same name, debuting in the 2008 New Models. The 2009 Muscle Mania version has a wider stripe than the 2008 versions. Equipped with a 390 hp version of the 440 V8 engine with three 2bbl Holley carburetors on an aluminum intake manifold, a black fiberglass lift-off hood secured with metal pins, heavy-duty suspension and 15" steel wheels, this muscle car was designed to blow the doors off the compitition. Hot Wheels are die-cast model vehicles manufactured by Mattel and were introduced in 1967. Originally the cars and trucks were manufactured to approximately 1:64 scale and designed to be used on associated Hot Wheels track sets. By 1972, however, a series of 1:43 scale "Gran Toros" made by Mebetoys in Milan, Italy, were introduced. More recently, a range of highly detailed adult collector vehicles, including replicas of NASCAR and Formula One cars, have found success. Despite the forays into larger scales, the brand remains most famous for the small scale free-rolling models of custom hot rods and muscle cars it has produced since the range first appeared. Roughly 10,000 or more different models of Hot Wheel Cars have been produced over the years. Hot Wheel Vehicles are authorized by the car makers General Motors, Ford Motor Company, and Chrysler Motors. Other car makers like Ferrari, Mazda, and Toyota have licensed Hot Wheels to make a scale model of their cars. To make a Hot Wheels version of a current-model car, Mattel looks at design blueprints of the full-sized car. An example of this is the Chrysler 300 Hot Wheel car. First, the Hot Wheel Team and Mattel went to Chrysler to look at the design of the 300 and an actual car. Chrysler licensed the blueprints to Mattel and the Hot Wheel Team for the purpose of producing the model car. Chrysler then required Mattel to return the blueprints after the Hot Wheel team was finished studying them. At Mattel's Hot Wheel design center, the blueprint's design measurements and dimensions were scaled down to conform to a model car that is 1/64 the size of a real car. Then a mock-up of the car was produced in plastic and evaluated. After this process, the mock-up became a die cast metal mock up, which was evaluated again. After these processes were complete, the final version of the car was then manufactured. For older scale models, the 1968 Chevy Nova for example, the model maker uses blueprints from General Motors and also studies car brochures of that model year. Larry Wood, the head of the Hot Wheels division (now retired), had been with the Mattel/Hot Wheels team since 1969. He originally worked for General Motors as a designer. The Hot Wheels product line has also included various tracks, accessories, and other kinds of vehicles such as "Sizzlers" rechargeable electric cars, "Hot Line" trains, "R-R-Rumblers" motorcycles, "Hot Birds" airplanes and the comical half-human/half-machine "Farbs".


 


More Videos...


Hot Wheels 71 Maverick Diecast Toy Car - Race Vehicle by Mattel - Auto Racing Toys Cars Collection
**RATE/FAVE/SHARE** Hi Hot Wheels fans and YouTubers today I will be showcasing the Hot Wheels 1971 Maverick Diecast Race Car by Mattel Toys! Hot Wheels are die-cast model vehicles manufactured by Mattel and were introduced in 1967. Originally the cars and trucks were manufactured to approximately 1:64 scale and designed to be used on associated Hot Wheels track sets. By 1972, however, a series of 1:43 scale "Gran Toros" made by Mebetoys in Milan, Italy, were introduced. More recently, a range of highly detailed adult collector vehicles, including replicas of NASCAR and Formula One cars, have found success. Despite the forays into larger scales, the brand remains most famous for the small scale free-rolling models of custom hot rods and muscle cars it has produced since the range first appeared. Roughly 10,000 or more different models of Hot Wheel Cars have been produced over the years. Hot Wheel Vehicles are authorized by the car makers General Motors, Ford Motor Company, and Chrysler Motors. Other car makers like Ferrari, Mazda, and Toyota have licensed Hot Wheels to make a scale model of their cars. To make a Hot Wheels version of a current-model car, Mattel looks at design blueprints of the full-sized car. An example of this is the Chrysler 300 Hot Wheel car. First, the Hot Wheel Team and Mattel went to Chrysler to look at the design of the 300 and an actual car. Chrysler licensed the blueprints to Mattel and the Hot Wheel Team for the purpose of producing the model car. Chrysler then required Mattel to return the blueprints after the Hot Wheel team was finished studying them. At Mattel's Hot Wheel design center, the blueprint's design measurements and dimensions were scaled down to conform to a model car that is 1/64 the size of a real car. Then a mock-up of the car was produced in plastic and evaluated. After this process, the mock-up became a die cast metal mock up, which was evaluated again. After these processes were complete, the final version of the car was then manufactured. For older scale models, the 1968 Chevy Nova for example, the model maker uses blueprints from General Motors and also studies car brochures of that model year. Larry Wood, the head of the Hot Wheels division (now retired), had been with the Mattel/Hot Wheels team since 1969. He originally worked for General Motors as a designer. The Hot Wheels product line has also included various tracks, accessories, and other kinds of vehicles such as "Sizzlers" rechargeable electric cars, "Hot Line" trains, "R-R-Rumblers" motorcycles, "Hot Birds" airplanes and the comical half-human/half-machine "Farbs".





18 Hot Wheels die-cast Cars 3-Packs Preview - Mattel Toys Auto Vehicles Reventon, Maelstrom and more
**LIKE/FAVE/SHARE** Hi Hot Wheels fans and YouTubers today I will be showing a sneak preview of my recent collection of Hot Wheels 3-packs!! Hot Wheels are die-cast model vehicles manufactured by Mattel and were introduced in 1967. Originally the cars and trucks were manufactured to approximately 1:64 scale and designed to be used on associated Hot Wheels track sets. By 1972, however, a series of 1:43 scale "Gran Toros" made by Mebetoys in Milan, Italy, were introduced. More recently, a range of highly detailed adult collector vehicles, including replicas of NASCAR and Formula One cars, have found success. Despite the forays into larger scales, the brand remains most famous for the small scale free-rolling models of custom hot rods and muscle cars it has produced since the range first appeared. Roughly 10,000 or more different models of Hot Wheel Cars have been produced over the years. Hot Wheel Vehicles are authorized by the car makers General Motors, Ford Motor Company, and Chrysler Motors. Other car makers like Ferrari, Mazda, and Toyota have licensed Hot Wheels to make a scale model of their cars. To make a Hot Wheels version of a current-model car, Mattel looks at design blueprints of the full-sized car. An example of this is the Chrysler 300 Hot Wheel car. First, the Hot Wheel Team and Mattel went to Chrysler to look at the design of the 300 and an actual car. Chrysler licensed the blueprints to Mattel and the Hot Wheel Team for the purpose of producing the model car. Chrysler then required Mattel to return the blueprints after the Hot Wheel team was finished studying them. At Mattel's Hot Wheel design center, the blueprint's design measurements and dimensions were scaled down to conform to a model car that is 1/64 the size of a real car. Then a mock-up of the car was produced in plastic and evaluated. After this process, the mock-up became a die cast metal mock up, which was evaluated again. After these processes were complete, the final version of the car was then manufactured. For older scale models, the 1968 Chevy Nova for example, the model maker uses blueprints from General Motors and also studies car brochures of that model year. Larry Wood, the head of the Hot Wheels division (now retired), had been with the Mattel/Hot Wheels team since 1969. He originally worked for General Motors as a designer. The Hot Wheels product line has also included various tracks, accessories, and other kinds of vehicles such as "Sizzlers" rechargeable electric cars, "Hot Line" trains, "R-R-Rumblers" motorcycles, "Hot Birds" airplanes and the comical half-human/half-machine "Farbs".





Hot Wheels Skull Crusher Diecast Toy Car - Race Vehicle by Mattel - Auto Racing Toys Cars Collection
**RATE/FAVE/SHARE** Hi Hot Wheels fans and YouTubers today I will be showcasing the Hot Wheels Skull Crusher Diecast Car by Mattel Toys! Hot Wheels are die-cast model vehicles manufactured by Mattel and were introduced in 1967. Originally the cars and trucks were manufactured to approximately 1:64 scale and designed to be used on associated Hot Wheels track sets. By 1972, however, a series of 1:43 scale "Gran Toros" made by Mebetoys in Milan, Italy, were introduced. More recently, a range of highly detailed adult collector vehicles, including replicas of NASCAR and Formula One cars, have found success. Despite the forays into larger scales, the brand remains most famous for the small scale free-rolling models of custom hot rods and muscle cars it has produced since the range first appeared. Roughly 10,000 or more different models of Hot Wheel Cars have been produced over the years. Hot Wheel Vehicles are authorized by the car makers General Motors, Ford Motor Company, and Chrysler Motors. Other car makers like Ferrari, Mazda, and Toyota have licensed Hot Wheels to make a scale model of their cars. To make a Hot Wheels version of a current-model car, Mattel looks at design blueprints of the full-sized car. An example of this is the Chrysler 300 Hot Wheel car. First, the Hot Wheel Team and Mattel went to Chrysler to look at the design of the 300 and an actual car. Chrysler licensed the blueprints to Mattel and the Hot Wheel Team for the purpose of producing the model car. Chrysler then required Mattel to return the blueprints after the Hot Wheel team was finished studying them. At Mattel's Hot Wheel design center, the blueprint's design measurements and dimensions were scaled down to conform to a model car that is 1/64 the size of a real car. Then a mock-up of the car was produced in plastic and evaluated. After this process, the mock-up became a die cast metal mock up, which was evaluated again. After these processes were complete, the final version of the car was then manufactured. For older scale models, the 1968 Chevy Nova for example, the model maker uses blueprints from General Motors and also studies car brochures of that model year. Larry Wood, the head of the Hot Wheels division (now retired), had been with the Mattel/Hot Wheels team since 1969. He originally worked for General Motors as a designer. The Hot Wheels product line has also included various tracks, accessories, and other kinds of vehicles such as "Sizzlers" rechargeable electric cars, "Hot Line" trains, "R-R-Rumblers" motorcycles, "Hot Birds" airplanes and the comical half-human/half-machine "Farbs".





Hot Wheels Fast FeLion Diecast Race Car by Mattel - Auto Racing Toys Cars Collection
**LIKE/FAVE/SHARE** Hi Hot Wheels fans and YouTubers today I will be showing the Hot Wheels Fast FeLion die-cast race car by Mattel Toys! With European styling and a twin turbo V8 engine, this 2-seat GT coupe was made to accelerate through the Alpines. Can you hear meow? Hot Wheels are die-cast model vehicles manufactured by Mattel and were introduced in 1967. Originally the cars and trucks were manufactured to approximately 1:64 scale and designed to be used on associated Hot Wheels track sets. By 1972, however, a series of 1:43 scale "Gran Toros" made by Mebetoys in Milan, Italy, were introduced. More recently, a range of highly detailed adult collector vehicles, including replicas of NASCAR and Formula One cars, have found success. Despite the forays into larger scales, the brand remains most famous for the small scale free-rolling models of custom hot rods and muscle cars it has produced since the range first appeared. Roughly 10,000 or more different models of Hot Wheel Cars have been produced over the years. Hot Wheel Vehicles are authorized by the car makers General Motors, Ford Motor Company, and Chrysler Motors. Other car makers like Ferrari, Mazda, and Toyota have licensed Hot Wheels to make a scale model of their cars. To make a Hot Wheels version of a current-model car, Mattel looks at design blueprints of the full-sized car. An example of this is the Chrysler 300 Hot Wheel car. First, the Hot Wheel Team and Mattel went to Chrysler to look at the design of the 300 and an actual car. Chrysler licensed the blueprints to Mattel and the Hot Wheel Team for the purpose of producing the model car. Chrysler then required Mattel to return the blueprints after the Hot Wheel team was finished studying them. At Mattel's Hot Wheel design center, the blueprint's design measurements and dimensions were scaled down to conform to a model car that is 1/64 the size of a real car. Then a mock-up of the car was produced in plastic and evaluated. After this process, the mock-up became a die cast metal mock up, which was evaluated again. After these processes were complete, the final version of the car was then manufactured. For older scale models, the 1968 Chevy Nova for example, the model maker uses blueprints from General Motors and also studies car brochures of that model year. Larry Wood, the head of the Hot Wheels division (now retired), had been with the Mattel/Hot Wheels team since 1969. He originally worked for General Motors as a designer. The Hot Wheels product line has also included various tracks, accessories, and other kinds of vehicles such as "Sizzlers" rechargeable electric cars, "Hot Line" trains, "R-R-Rumblers" motorcycles, "Hot Birds" airplanes and the comical half-human/half-machine "Farbs".





Episode 122 Replacing Axles and Wheels on Diecast Toys
Ever wanted to replace those lousy looking wheels on your diecast toys? Want to recreate that cool car from your college years? Maybe just learn how to swap wheels or rims from one car to another. In this video I use copper Tubing to recreate axles in diecast customized vehicles. It isn't hard, watch the video and start customizing your own toys.





Maisto Elite Transport, Adventure Wheels, Speed Gear
The Maisto Elite Transporters have some licensed models and are about the same price as Hot Wheels Truckin' Transporters which are for kids. To see another video that shows previous releases with a trailer, http://www.youtube.com/watch?v=RsOj9BcnLdo or search my videos for Maisto Elite Transport: Police Lambo And here was the final 2-pack that I could never find. http://www.youtube.com/watch?v=759QtvJhhLA





Metal mini car series die cast construction toys tractor toy
There is no child who does not like toys, but what they are actually asking for? They want us to show them toys that are similar in what they do, to the vehicles they see everyday in the streets. Tractors, trucks, cranes, fire truck, ambulance and police car. All vehicles which they see at home, kindergarten, public garden, and basically anywhere. When I realized that my children ask me every evening recover their experiences from the day before, I decided to create videos with the cars they love most. But it's not just cars, trucks, tractors, cranes, or any other construction vehicle. This is actually a reconstruction of the course of the day, learning how the mechanics of running various vehicles, what is hydraulic or pneumatic motor, how to lift heavy products, and in fact, as I see it today, this is my way to show them how to operate simple physical laws. In the coming weeks I intend to upload here More videos of automotive engineering, real and scale models really good quality (some are already on the way from abroad ....). Subscribe my channel and will get an update on all the new videos that are coming up. Thank you!





Modified Diecast Vehicles, Custom Trikes, Hot Wheels, Johnny Lightning
A short video of a few 1/64 scale diecast vehicle modifications. Showing what the original vehicle looked like followed by the modified version. I don't repaint my customized trikes. The cutting / fitting / re-assembly is done in such a way to preserve the original manufacturers paint. If I make a mistake with the cutter, it will show in the finished work. Please like or comment, and I will add more like this.





Hot Wheels - Collection (2012)
my news cars hot wheels





welly tractors and excavator die cast toys טרקטור
There is no child who does not like toys, but what they are actually asking for? They want us to show them toys that are similar in what they do, to the vehicles they see everyday in the streets. Tractors, trucks, cranes, fire truck, ambulance and police car. All vehicles which they see at home, kindergarten, public garden, and basically anywhere. When I realized that my children ask me every evening recover their experiences from the day before, I decided to create videos with the cars they love most. But it's not just cars, trucks, tractors, cranes, or any other construction vehicle. This is actually a reconstruction of the course of the day, learning how the mechanics of running various vehicles, what is hydraulic or pneumatic motor, how to lift heavy products, and in fact, as I see it today, this is my way to show them how to operate simple physical laws. In the coming weeks I intend to upload here More videos of automotive engineering, real and scale models really good quality (some are already on the way from abroad ....). Subscribe my channel and will get an update on all the new videos that are coming up. Thank you! Toy tractor,جرار لعبة,Spielzeug-Traktor,खिलौना ट्रैक्टर,oyuncak traktör,玩具トラクター,玩具拖拉机,Laruang traktor,Игрушка трактор,tracteur jouet, I 'v got some presents for my kids benaya and ayala, that just love watching that video, even more than playing with the toys. lots of mini cars, dozers, tractors and trucks. enjoy !





Customizing Hot Wheels and Matchbox Cars with Rit Dye
Rit dye is mostly used for dying fabric. it can be found in many retailers, especially crafts stores.





Awesome Hot Wheels CUL8R Car - Diecast Race Vehicle by Mattel - Auto Racing Toys Cars Collection
**RATE/FAVE/SHARE** Hi Hot Wheels fans and YouTubers today I will be showcasing the Hot Wheels CUL8R Diecast Race Car by Mattel Toys! The "See you later", designed by Mark Jones is playable in hot wheels all out. Hot Wheels are die-cast model vehicles manufactured by Mattel and were introduced in 1967. Originally the cars and trucks were manufactured to approximately 1:64 scale and designed to be used on associated Hot Wheels track sets. By 1972, however, a series of 1:43 scale "Gran Toros" made by Mebetoys in Milan, Italy, were introduced. More recently, a range of highly detailed adult collector vehicles, including replicas of NASCAR and Formula One cars, have found success. Despite the forays into larger scales, the brand remains most famous for the small scale free-rolling models of custom hot rods and muscle cars it has produced since the range first appeared. Roughly 10,000 or more different models of Hot Wheel Cars have been produced over the years. Hot Wheel Vehicles are authorized by the car makers General Motors, Ford Motor Company, and Chrysler Motors. Other car makers like Ferrari, Mazda, and Toyota have licensed Hot Wheels to make a scale model of their cars. To make a Hot Wheels version of a current-model car, Mattel looks at design blueprints of the full-sized car. An example of this is the Chrysler 300 Hot Wheel car. First, the Hot Wheel Team and Mattel went to Chrysler to look at the design of the 300 and an actual car. Chrysler licensed the blueprints to Mattel and the Hot Wheel Team for the purpose of producing the model car. Chrysler then required Mattel to return the blueprints after the Hot Wheel team was finished studying them. At Mattel's Hot Wheel design center, the blueprint's design measurements and dimensions were scaled down to conform to a model car that is 1/64 the size of a real car. Then a mock-up of the car was produced in plastic and evaluated. After this process, the mock-up became a die cast metal mock up, which was evaluated again. After these processes were complete, the final version of the car was then manufactured. For older scale models, the 1968 Chevy Nova for example, the model maker uses blueprints from General Motors and also studies car brochures of that model year. Larry Wood, the head of the Hot Wheels division (now retired), had been with the Mattel/Hot Wheels team since 1969. He originally worked for General Motors as a designer. The Hot Wheels product line has also included various tracks, accessories, and other kinds of vehicles such as "Sizzlers" rechargeable electric cars, "Hot Line" trains, "R-R-Rumblers" motorcycles, "Hot Birds" airplanes and the comical half-human/half-machine "Farbs".





How to Make Custom Axles for Your Diecast Cars





2013 Hot Wheels Cars Retro Knight Rider KITT Diecast, Ghostbusters Ecto 1 Scooby-Doo Mystery Machine
This is the new 2013 hot wheels retro entertainment cars collection. From ghostbusters ecto 1. From Batman classic tv series batmobile. From knight rider kitt. From scooby-doo mystery machine. These cars are 1:64 scale diecasts. These are exact replicas of tv shows from the 60's. These vehicles are ready to drive off the big screen and into the hands of fans, collectors and kids everywhere. Some of the most popular and recognizable cars to ever have screen time are replicated in this line n provided in distinct movie-related packagin. Vehicles are 1:64 scale die-cast cars featuring chassis with synthetic rubber tires. Music by Kevin MacLeod. Thanks for watching blucollection Videos. Also check out disneycollectorbr great toy channel. http://www.youtube.com/user/disneycollectorbr/videos?view=0 . Thanks for watching ToyReviews by Blutoys. Check out youtube-Toychannel PixarCars all about, juegos juguetes giocattoli y brinquedos de carrinhos at: http://www.youtube.com/blucollection Also check out DisneyCollector about DisneyPlayDoh at: http://www.youtube.com/DisneyCollectorBR





Expensive Diecast Cars vs Cheap Diecast Cars
In this video I compare an expensive diecast car (1/18 Mercedes-Benz Limousine Elegance made by AutoArt) against a cheap diecast car (1/18 Mercedes-Benz E350 CDI made by Maisto)





Which car is faster? Which Car is Faster?




Similar 1/4 mile timeslips to browse:

1967 Dodge Coronet 500: 10.717 @ 126.720
David Fishgold, Engine: 500 cubic inch Indy Mopar Racing Block, Tires: M/T 28 x 10.5


1966 Dodge Coronet : 11.060 @ 121.000
George Germann, Engine: 440, Tires: moroso


1969 Dodge Coronet Super Bee: 12.070 @ 116.370
Harry Chargois, Engine: LOW DECK MOPAR STROKER, Tires: Firestone G70X14


1970 Dodge Coronet 2 door hardtop: 12.245 @ 113.590
Bob, Engine: 469 big block Chrysler with EFI, Tires: BF Goodrich 275/50R15 drag radials


1966 Dodge Coronet 440: 12.368 @ 110.050
P Webb, Engine: 440, Tires: hoosier quick time 10.5in


1966 Dodge Coronet 440: 12.617 @ 107.970
Phil Hudlow, Engine: Dodge 440, Tires: Good Year 29x12 on the rear and 28x4.5 up front


1966 Dodge Coronet 440: 12.617 @ 108.430
Phil Hudlow, Engine: Dodge 440, Tires: Goodyear 29x12 & 28x4.5


1969 Dodge Coronet 440: 13.340 @ 102.740
todd, Engine: 360, Tires: nitto 555


1970 Dodge Coronet Superbee: 13.420 @ 102.300
Todd Lewis, Engine: 440, Tires: 15/50's


1968 Dodge Coronet : 13.490 @ 106.800
Me,


 


©2014 DragTimes - Disclaimer