custom eclipse

mitsubishi eclipse custom dash fiberglassed and painted dark metalic blue.

More Videos...


My 1996 eclipse
Some much work as put into her.there still work that needs to be done.





How to convert your anolog gauges to LCD Part 1
This is a step by step instruction on how I replaced my analog gauge panel in my 2003 Mitsubishi Eclipse with a 7 inch Lilliput USB powered monitor. I have a carpc running the whole operation via Elm 327 OBDII to USB adapter and DashCommand.





'03 Eclipse With Four Rockford Fosgate P3 15s
My 2003 Mitsubishi Eclipse with its sixth variation of sound system since i started years ago. SYSTEM: -four Rockford Fosgate P3 15s -Big Three upgrade -Optima yellow top -Deep cycle in the trunk -Kicker KS speakers front and rear (6 3/4 & 6x9) -Sony deck -Sony 200watt 4-channel amp (door speakers) -Two Fosgate R1200.1s (subs) -sound deadened from taillights to front seats Other mods: -AEM intake -Megan header -Megan coil-overs -Megan short shifter -Custom header back Exhaust -Eagle Alloy 16's -5% tint -halo headlights -tinted tails and turns





DIY- How To Paint Your Car Interior In 10 Steps
1. a. Prep Clean Part With Warm Soapy Water b. Prep Wet Sand With 800-1000 Grit Sandpaper c. Let The Part Compelety Dry For A Hour 2. a. First Coat Of Primer Make It Light b. Second Coat Of Primer Make It Meduim c. Last Coat Of Primer Make It Heavy But Watch For Runs 3. a. Sand The Primer With 800-1000 Grit 4 a. First Coat of Paint Make It Very Light Just Enough To Make Spots Hold Can 12 Inchs Away From Part b. Second Coat Of Paint Make It Light After This Is Done You Should Still See The Color Of The Primer c. Thrid Coat Swipe Paint Across The Part And Now You Should See No Primer d. Fourth Coat To Etc. Coats Swipe Paint Across Paint Lightly 5. a. Clear Coat Stage Spot Your Clear On Your Part Lightly b. Repeat Atleast 5 Times After The First Coat You Can Spray A Little Thicker 6. a. Extra Stage You Can Grab You Some Good Wax And Put It On Thick To Protect Your Part Better 7. a. Designs Or Logos- You Can Apply A Smily Face Sticker On A white Piece b. Paint That Part Black c. Remove The Sticker And The Face Will Be White d. Look On Google For Logos Or Letters e. Print And Razor Blade The Logo or Letters Out 8. a. Tips- Wait Atleast 10 Mintues In Between Coats b. Tips- Do NOT Move The Part After Painted c. Tips- Shake Can Before Use And Clear After Use 9. a. TroubleShooting- Clear Is Dull= The Weather Is To Hot or Cold Need Between 70-80 Degress b. TroubleShooting- Paint Is Running= Your Holding The Can To Close To the Part c. TroubleShooting- Paint Cracked or Bubbled= The Part Was Wet d. TroubleShooting- A Bug, Dust, Or Grass Fall On My Fresh Paint= Let Cure A Full Day And Wet Sand With 1000 Grit 10.a. Curing The Paint- Wait Atleast 4-5 Days After Last Coat Of Clear Is Appiled b. CUring The Paint- Make Sure It Is In A Warm Area




Follow