Thrush welded muffler on a 98 f150 4.6l 3" inlet and 2.5" dual outlets. no cats. personally i like my older video when i still had cats. but they were plugged and needed to come off. this is my new motor out of an 02 Mustang. i trying to figure out something to get rid of the snap crackle pop noise and get back to the nice rumble
Hush Thrush Super Turbo Muffler
2000 Ford F150 V8 4.6L with Hush Thrush Super turbo muffler and 3A racing 12'' chrome steel Exhaust tip. There's not many videos of
vehicles with the hush thrush mufflers so i decided to upload mine for all
of youtube to enjoy ;)
f150 on the dyno
dropped in 02 Mustang motor
in a 98 f150 having it tuned on the Dyno...made 173.3 hp at the
wheels, 13.3hp more than we started with, this was in calgary at
techmotion. ath home in saskatoon i should Dyno around 190hp due to the
elevation change for here and calgary. only tuned on 87 octane....might
have got more out of it if we had premium fuel but oh well..
Dynomax Ultra Flo vs Walker Muffler Comparison - sound levels and sounds!
We've compared two mufflers in search of quiet(er) performance.
*EDIT* Dyno results
are in! 443 rwhp and 490 rwtq. Taking into account the 1.5 degrees of
timing we added, the mufflers cost NO power. Before we made 422 rwhp and
EDIT EDIT: Car has run a best of 10.77 @ 128 so far... still some left in
EDIT EDIT EDIT: The car turned a 10.55 @ 129.3 and the block and trans let
go. A Dart 363 and a built Powerglide are going in!
thrush welded muffler
cheap Exhaust job i did on my '93 gmc
sierra 4.3L. Parts used: a thrush welded muffler 2.25" center inlet/dual
outlet($32 from Summit), 10' of 2.25" aluminized Exhaust pipe(about $17), one Exhaust clamp(about $3), one universal hanger
($5), 2' of 3.00" pipe used for tips($4). $61 total. the welder and Exhaust bending machine sure come in