Will it Run? Episode 6: 1958 Plymouth Savoy
Time to get the 58 Plymouth Savoy up and running! I put it on a good frame
and changed it to a standard shift. Still a long way to go, but a huge
improvement on the piece of junk I brought home last winter. It's now a 230
c.i. flathead 6 with a 3-on-the-tree. Hope you like it like I do! Thanks
for checking it out!
1965 Plymouth Satellite - 15 Minute Introduction
15 minute clip about the 1965 Plymouth Satellite. 1965 was the first model
year for the Satellite and this one was ordered in November 1964 by
Nathaniel Anschuler from Max Barish Plymouth in Los Angeles, CA for his
wife Bertha. It was delivered with a 361cid big block engine, console shift
TorqueFlite automatic, A/C, power windows, power steering, tinted glass,
dash clock, bumper guards, courtesy light package, retractable seat belts
and black vinyl roof. Subsequent owners brought it to the Boston area in
the 80's where it sat in a garage until it was relocated to the Catskills
from where I bought it in 2006. Restoration started in 2007 and finished in
the summer of 2013.
Daredevil Driving Stunts in a 1936 Plymouth: "Trial by Torture" 1935 Chrysler Corporation
more at http://cars.quickfound.net/
Toughness of the 1936 Plymouth is demonstrated by showing how components,
structures, and the entire vehicle are "torture tested." Includes several
good shots of deliberately rolling cars, and daredevil driving by "Hell
Drivers' such as Lucky Teter and Jimmy Lynch.
Public domain film from the Prelinger Archive, slightly cropped to remove
uneven edges, with the aspect ratio corrected, and mild video noise
The soundtrack was also processed with volume normalization, noise
reduction, clipping reduction, and/or equalization (the resulting sound,
though not perfect, is far less noisy than the original).
Plymouth was a marque of automobiles based in the United States, produced
by the Chrysler Corporation and its successor DaimlerChrysler. Production
was discontinued on June 29, 2001 in the United States.
The Plymouth automobile was introduced on July 7, 1928. It was Chrysler
Corporation's first entry in the low-priced field, which at the time was
already dominated by Chevrolet and Ford. Plymouths were actually priced
slightly higher than their competition, but offered all standard features
such as internal expanding hydraulic brakes that the competition did not
provide. Plymouths were originally sold exclusively through Chrysler
dealerships. The logo featured a rear view of the ship Mayflower which
landed at Plymouth Rock. However, the Plymouth brand name came from
Plymouth Binder Twine, chosen by Joe Frazer for its popularity among
The origins of Plymouth can be traced back to the Maxwell automobile. When
Walter P. Chrysler took over control of the troubled Maxwell-Chalmers car
company in the early 1920s, he inherited the Maxwell as part of the
package. After he used the company's facilities to help create and launch
the Chrysler car in 1924, he decided to create a lower-priced companion
car. So for 1926 the Maxwell was reworked and re-badged as the low-end
Chrysler "52" model. In 1928, the "52" was once again redesigned to create
the Chrysler-Plymouth Model Q. The "Chrysler" portion of the nameplate was
dropped with the introduction of the Plymouth Model U in 1929.
Great Depression, 1940s and 1950s
While the original purpose of the Plymouth was to serve a lower-end
marketing niche, during the Great Depression of the 1930s, the marque
helped significantly in ensuring the survival of the Chrysler Corporation
in a decade when many other car companies failed. Beginning in 1930,
Plymouths were sold by all three Chrysler divisions (Chrysler, DeSoto, and
Dodge). Plymouth sales were a bright spot during this dismal automotive
period, and by 1931 Plymouth rose to the number three spot among all cars.
In 1931 with the Model PA, the company introduced floating power and
boasted, "The economy of a four; the smoothness of a six." In 1933 Chrysler
decided to catch up with Ford and Chevrolet with respect to engine cylinder
count. The 190 cu in version of Chrysler's flathead-6 engine was equipped
with a downdraft carburetor and installed in the new 1933 Plymouth PC,
introduced on 17 November 1932. However, Chrysler had reduced the PC's
wheelbase from 112 in (284.5 cm) to 107 in (271.8 cm), and the car sold
poorly. By April 1933, the Dodge division's Model DP chassis, with a 112 in
(284.5 cm) wheelbase, was put under the PC body with DP front fenders,
hood, and radiator shell. The model designation was advanced to PD and the
car was marketed as the "DeLuxe" 1933 Plymouth. This car sold very well and
is the 1933 model most commonly found in collections. The PC became the
'Standard Six'. It had been the 'Plymouth Six' at introduction, and was
sold through to the end of 1933, but in much lower numbers. It is
consequently in the minority in collectors' hands today. In 1937, Plymouth
(along with the other Chrysler makes) added safety features such as flat
dash boards with recessed controls and the back of the front seat padded
for the rear seat occupants. The PC was shipped overseas to Sweden,
Denmark, and the UK, as well as Australia. In the UK it was sold as a
'Chrysler Kew', Kew Gardens being the location of the Chrysler factory
outside London. The flathead 6 which started with the 1933 Model PC stayed
in the Plymouth until the 1959 models.
In 1939 Plymouth produced 417,528 vehicles, of which 5,967 were two-door
convertible coupes with rumble seats. The 1939 convertible coupe was
prominently featured at Chrysler's exhibit at the 1939 New York World's
Fair, advertised as the first mass-production convertible with a power
folding top. It featured a 201 cu in, 82 hp version of the flathead six
For much of its life, Plymouth was one of the top-selling American
automobile brands; it together with Chevrolet and Ford were commonly
referred to as the "low-priced three" marques in the American market...
1959 Plymouth Sport Fury - Test Drive & Review
Since I am into more things than just RC I thought this might be a great
way to expand the channel a little.
I have been wanting to do a review and drive of a long time member of the
family. This is the old man's 1959 Plymouth he has had.. well basically
since 1959. I hope you enjoy seeing this "old bomb" as he calls it.
Fury V-800 Super-Pak V8;
318ci - 260hp / 345tq.
Torqueflite automatic trans
2.93:1 Axle ratio.
Music: Provided by Kevin MacLeod (incompetech.com)
1968 Plymouth Satellite RESTO-MOD
My Plymouth Roadrunner clone that recently underwent a complete makeover.
Some of the finer details:
Paint: 2010 Ford Mustang
Wheels: Boss 338 (18x8 / 18x9.5)
Tires: Nitto NT-05 (245/40R18 / 285/35R18)
Headlights: Ultima 5 3/4" LED Halo (white) -
Taillights: Custom LED kit
Exhaust: 3.5" w/ headers, x-pipe and
Seats: 2009 Challenger "Heritage Edition"
Center Console: 2004 Cadillac Deville
Hood Ornament: Ricker Designs Custom Fender Art
1958 Plymouth Belvedere - Christine Shows Her Latest Trick - Take 1
My Christine shows her latest trick. She still can't drive or fix her up by
herself but she's able to do some other evil stuff...watch out! :-)
I shot two slighty different versions of this video but couldn't decide
which one I should take, so I uploaded both of them.
Here's the other video:
If you're a fan of the movie "Christine" or 1957 / 58 Plymouths in general
don't forget to join the International Christine Club.
More information here:
Building Better Christines !!! 1958 Plymouth restoration miracle
Watch in amazement as a 1958 Plymouth parts car is transformed before your
eyes to an award winning Christine clone........unbelievable !! Many
thanks to all the guys and gals who contributed time, sweat and money to
complete this project. As you can see, it was well worth it !!
Cold start of my 71 Plymouth Satellite, 360 V8!!
Didn't need the choke because I just had the car out a few days ago. It has
a TKO 5spd tranny, 8 3/4 rear with a 3.23 gear. Pretty quick off the line
and cruises on the highway thanks to the .62 overdrive gear!! 1800rpm at
70mph. Oh yeah, I get about 18mpg on the highway, not bad with 400hp under
Plymouth GTX 440 LOUD SOUND RoadRunner V8
Plymouth GTX 440 / RoadRunner Sound - Hello and welcome to the Car
Acceleration TV Channel 2014. In today's video, we want to show you a great
american classic car, the Plymouth GTX 440 / RoadRunner. The V8 engine
sound is really incredible. Watch this Plymouth video for cold start sound,
drive scenes and listen the horn. End of 1970, the Belvedere was replaced
by the Plymouth Satellite. Consequently, based on the GTX now the new
model. However, this lasted only one year. Completely new was the coupé
body, technically, everything remained the same. Available were still the
7.2-liter with two power ratings and the seven-liter Hemi V8. Due to sharp
decline in sales of the GTX was taken as a stand-alone model in the fall of
1971 from the program, in the model years 1972 to 1974 there were but for
the continuing Plymouth Road Runner GTX a package. My opinion is from this
period is the most interesting of the Plymouth Cuda Barracuda model.
Do you like this video? Please visit my youtube car channel for best
sound, drive & grip, acceleration and top speed videos, american muscle
cars, classic cars and much more.
134120 / 1972 Plymouth Satellite
For more information on this vehicle visit http://tinyurl.com/bn6xgd2
The product of a high dollar, multi-year build, this incredible Mopar
pro-tourer wraps a 500 horsepower 3G Hemi and a
completely custom suspension in a custom leather interior and killer
Completed in early 2012, this super clean curve carver is the direct result
of what happens when a seasoned fabricator has an uncompromised vision,
major dedication and access to a six-figure bank account. See, the car's
creator already owned a killer Charger that was buff enough to pull down
sub 10-second passes on an NHRA-sanctioned drag strip, so he wanted to
build a second car that was a bit milder and quite different. Enter this
neon Plymouth, a project which quickly escalated from the restoration of a
fun cruiser into the creation of an outrageous driver's car.
Hoist this Plymouth's bright fiberglass hood and you'll find 6.1 liters of
naturally aspirated 3G Hemi bliss. Straight from the factory that popular
SRT8 powerplant produces an impressive 425 horsepower and 420 lb./ft.
of torque. And with the help of a custom tune by the folks at Bouchillon
Performance Engineering in Hanahan, South Carolina, its performance
transforms from wild to flat out wicked! Measuring in at roughly 372 cubic
inches, the big mill uses a revised block, forged internals, lighter
pistons and a cast aluminum intake to crank out a whopping 500 horsepower and 460 lb./ft.
of torque. And best of all, that's 500 horsepower that'll fire up
in any weather, last thousands of maintenance-free miles, and probably lay
waste to any old school muscle car that's brave enough to stage a
Behind the neo Hemi, a Hughes Performance A727 Torqueflite produces great
bite and hard launches. Out back, there's a fresh Moser Sure Grip rear end
that's equipped with moderate, pavement pounding gears. At the front of the
car, custom-mounted rack and pinion steering provides smooth turns and
quick reflexes. That rack is held off the ground by a first class double
A-arm suspension that's a product of Magnumforce upper control arms, two
inch drip spindles, fresh Aldan coil overs and modified Mancini lower
control arms. Holding the car's rear end off the ground is a Reilly
Motorsports triangulated four link set up that's equipped with new QA-1
coil over shocks. And at the corners of the chassis, custom Boze Alloy
wheels spin 235/55R18 front and 305/45R20 rear Yokohama Advan STs around
graphite gray spokes, satin-finished lips and yellow-trimmed center caps.
Open this B-Body's solid closing doors and take in its custom black
interior that, as an astute combination of serious hardware and modern
aesthetics, is the perfect place to spend jaunts like Hot Rod's famed Power
Tour. The first thing you'll notice is a pair of GS-1 touring buckets,
fitted with high quality RCI harnesses, that are so supportive they'll have
no problem living life 100 miles at a time. Between those seats, a custom
console anchors a B&M Pro Bandit shifter between two cup holders and a
remote controlled Sony CD player. At the front of that console, a clean
Just Dashes dash features snazzy white-faced gauges and a modern pushbutton
ignition switch. And in front of the driver, a three-spoke Momo steering
wheel spins a thick black rim around a shaved steering column.
Brutally fast and visually stunning, this awesome Plymouth perfectly
embodies the tried and true philosophy of pushing the envelope as far as
the arc will go. Call, click or visit http://RKMotorsCharlotte.com for more
1972 Plymouth Satellite, Road Runner & GTX Sales Features - Chrysler Master Tech
1972 Plymouth Satellite, Road Runner & GTX Sales Features Video from the
Chrysler Master Technician Service Conference Training Series. Used as a
training tool for dealer salesmen and a sales tool for potential customers.
Mopar is a registered trademark of Chrysler Group LLC. Master Tech series
training materials are the property of Chrysler Group LLC and are used with