Heavily modified Nizpro turbocharging Ford 4L DOHC (factory turbocharged Aussie six from Falcon XR6) making 1163hp on engine Dyno.
Footage is from 2004.
50psi boost 1200+hp Nissan RB30 - Ethanol E98
Nissan RB30 SOHC 3L engine built and tuned by JPC making over 1200hp on
Ethanol fuel. The engine still retains a factory block and crank.
Improvements come from a custom JPC turbocharger, manifolding, roller rockers and cam
gear. Fuel is fed via ID2000cc injectors and an Autronic computer system.
This engine has previously run 8.79 at 160.25mph (with less power) in a
full weight (3250lb) Holden VL commodore through stock suspension,
Powerglide transmission, 9in rear end and 28x9in slicks.
Johnsons Performance Centre
Formula One V6 turbo: 2014 Rules Explained
Transforming Formula One: 2014 Rules Explained: CGI Clip
A new clip from Red Bull sees Daniel Ricciardo and Sebastian Vettel explain
the 2014 Formula One regulations -- which are arguably the most complex the
sport has ever seen.
At the start, thousands of car parts simultaneously assemble around Dan to
form the RB10.
As Dan races to catch up Seb in his RB9, the World Champion's car becomes
transparent while travelling at full speed. The film then presents a visual
sequence that shows the 2014 regulation changes taking shape and coming to
life, as Seb's car transforms into an RB10.
As well as providing information on the new technical changes for 2014, the
clip also presents a unique view of the technology at work inside this
year's Formula One cars.
More information on the Red Bull Ring is available at
Follow us on social media @
How to build HORSEPOWER - Ford 461ci Windsor V8 by Dandy Engines
Engine specialists Dandy Engines building a small block Windsor 461ci
stroker for Pat Staplton. Follow the engine assembly as the guys aim to
make more than 820hp naturally aspirated on regular pump unleaded 98-RON.
Pat plans on putting this brute of an engine into a Ford Falcon XD/XF Ute.
[ http://dandyengines.com ]
Creative Commons music license CC 3.0
Jahzzar - Breaking Bad
Angry Nissan GT-R dyno - PROBLN
Brad's HKS T51R single turbo 2.8L
stroked RB26 powered Nissan R33 GT-R Skyline on the Dyno. The car has previously
made over 650kW to all 4-wheels but in RWD mode this time out the GT-R was
struggling to put it's massive power down to the rollers...
Dyno day - April 20th
Gramps the 11 Second Car - Build Part 7
Part 7 of the Gramps Build!
Got a question about the build? The forum has a dedicated thread here:
Get behind MCM and show the world that you DIY with mad stuff from the MCM
Facebook for daily updates!
Also something to note around Mighty Car Mods: we are normal guys and are
not trained mechanics. We like to make interesting car mods and show you
how we've gone about it, but we can't promise that anything we show you
will work for your particular car, or that you won't harm yourself, someone
else, your car or your warranty doing it. Please be safe, be responsible
and unless you know what you're doing, do not fool around with very serious
machinery just because you've seen us make it look so easy. Talk to a
qualified mechanic if you are in any doubt.
Ferrari V12 Engine
Ferrari V12 Engine Assembly. From start to finish, one technician is
responsible for the assembly........
For more automotive news:
Follow us on Facebook:
70 Double Blown GTO
My 1970 GTO with two blowers. It's 474ci Pontiac engine with a 8-71 blower
on top of a 6-71 blower. This is from the last day of being double blown.
I'm going to one single 8-71 blower and going racing. The front clip was
removed to make it easier to work on. The reason for the double blowers was
not as a power enhancement like many ASSume. I stacked the blowers to have
a car that stood out in the crowd. Most Pro Street cars were starting to
blend together. If you seen one, you had seen them all. That wasn't the
case with this GTO. Al someone had to say was "The double blower GTO" and
people knew which car. I was told it couldn't be done, so I attempted it
and it worked. It stayed that way for almost 2 years. I knew a twin turbo setup would make more HP. I knew I could
have run a 14-71 blower and made more power. That wasn't the point. I
wanted to be different than the other cars in the parking lot, I did that
now it's time to ove on. For all those people who don't understand why,
I'm not going to try and explain it to you anymore. Get over it. I didn't
expect EVERYONE to love it. But you won't forget it.
FORD CRUMBLES IN PATH OF BIG BLOCK CHEVY!!
On the first hole of the day at Louisiana Mudfest, Brian Briggs
(TheMudbogger79) showers down on that skinny. Unfortunately there was
another truck stuck in the path of his roost. While trying to move out of
the way, the entire 4-link setup completely cratered when the driver
spooled up and dumped the clutch. The aftermath wasn't pretty. Too bad it
was the first day!
Louisiana Mudfest near Colfax, Louisiana - April 19-22, 2012.
1996 Silverado details - 505 chevy stroker big block, solid lift cam,
forged crank rods and pistons, cast iron heads with port work, roller
rockers, 10.3 -1 compression, NV4500 5 speed manual transmission, 2.5 ton
Rockwells, 54" Boggers, Profab trasfer case, Front leafs have 12" lift and
10" block. Rear springs have 8" lift, 15" block and shackle flip.
Be sure to check us out on Facebook at Triple-X Motorsports & Outdoors for
all the latest updates!
Blower BOOST ~ How to make V8 noise
Chevy big block Chevy 496ci V8 on the Dyno at Dandy Engines. Boosted by a Littlefield 8-71 Supercharger, the engine is setup for endurance
use in a ski race boat application.
[ http://www.DandyEngines.com ]
Renault 3.0L V10 at 20,000 RPM
Renault 3.0L V10 between 16,000 and 20,000 RPM
(Renault 2.4L V8 at 20,000 RPM
Some say its a V10 but I can only count 8 injectors...)