Open Track Day, n/a 3-rotor Rx7 Defined Autoworks
A fun open track day, with driving instructor. 1st time out with this Rx7,
back in 2010. Kept the rpm and top speed down so the instructor didnt get
nervous. Camera mount was going back and fourth, so looks a bit strange!
On this day it was at 400rwhp, 10,000 rpm (once in a while). Full G-force
What its like owning a 3 Rotor 20B RX-7
I have one of the most amazing custom RX-7s in the world. I want to share
my experience of owning and driving such a unique car.
I explain where the engine came from, why its so special, and what it does
to a Mazda RX-7
20B 3 Rotor Turbo FD RX7 with an amazing 761hp at 24 PSI of BOOST!!
FD RX7 owned by paul, customer of mazfix racing stole the show with
outright winner at mazfix Dyno day 2010, paul's stunning
looking street rx7 come out with figures of 761.1hp @24psi of Boost which as you can tell watching the video
sounds tuff. As time has come along paul is now running on pump fuel not
C-16 and has a figure of 707hp. Thanks guys for watching and like always
stay posted we always have more coming.
Part 12: 13B Rotary Engine Rebuild - My 76 Mazda RX-5 Cosmo Restoration
Just as I promised last episode, it is finally time to build the engine!
Part 12 of my RX-5 Cosmo restoration covers the entire process of building
the 6 port 13B Mazda rotary engine. While this engine is a hybrid of GSL-SE
RX-7 and Cosmo parts, the process is the same for any rotary from a 12A to
a 13B NA, 13B turbo, 13B-REW or any
other variant of the 13B. This video shows the whole process of the engine
build, starting from measuring the rotors and covering everything else
including clearancing the side seals, assembling the rotors, complete
assembly the short block, setting the eccentric shaft end play and
installing the front cover and everything underneath it. It's probably the
most complete engine build video outside of what you can buy from the
vendors, and as such, is an hour long. After this one, I'm going back to
videos under 20 minutes. But for now, grab a beverage of your choice, sit
back, and enjoy.
RE Amemiya Super Greddy 7 RE20B RX-7 FD3S
This RE Amemiya Super Greddy 7 RE20B was built for the annual Tokyo Auto
Salon. This exquisite machine is packed with RE Amemiya's tuning knowledge
and is setup for the street.
The intent of the vehicle is of course, running the Wangan highway. The
machine was designed to easily reach high speeds and provide unmatched
stability at 300km/h. This makes 300km/h seem like leisurely cruise.
The three rotor 20B engine was removed from a Mazda Cosmo. It is fairly
easy for RE Amemiya to build a 300km/h engine, and it can be done with a
13B. Then why choose a 20B? The 13B is notoriously known to have a short
life span, especially after it has been modified. Also, it lacks the low
end torque, and it does not hold the power to leisurely reach, and cruise
at 300km/h like the 20B.
Therefore, the 20B was chosen, and the low end torque demise was solved.
But even though it's a rotary engine, doesn't mean that it is a easy swap.
The weight distribution of the well balanced FD becomes thrown off. The 20B
had to be offset 10cm to the rear and 6cm to the front in reference to the
13B. Also, the body, subframe, and the propeller shaft all need
The exterior was dressed up with the RE Amemiya 2006 model Aero kit. It
consists of a Porsche 997 front headlights, and the rotary themed rear
bumper. The sides consist of super wide fenders to accentuate the whole
The vehicle was completed just in time for the first ever Pre Tokyo Auto
Salon event held in the United States. The vehicle then will be shipped off
in time for the real 2006 Tokyo Auto Salon event in Tokyo.
***http://www.Garage411.com/ - Repair guides for your Acura, Honda, BMW,
Nitrous LSx Mazda RX-7 vs E85 Big Turbo EVO on slicks!
EVO HAD CLUTCH ISSUES REMATCH COMING SOON!!
OutOfOrder EVO vs DNR Performance LSx RX-7
Shoutout to 3HeadedElephantS for the GoPro Footage! Checkout his channel
and subscribe, also watch his badass edit of this same race here:
20B PP Non Turbo RX3 Australias Quickest N/A Rotary Engine
Support Australias Number 1 Rotary Channel.. Join our new website!! Click
here its free!!
WSID 30/07/08 - This video has now been re created for Hi Quality
Viewing.. There is plenty of Rotors for Sharing.. Add it to your
favourites.. pass it round!!!
Champions-Motorsports.com RX-7 Widebody 20B
Champions-motorsports.com original show car: 20B powered 1994 Mazda RX-7
wide body. The body kit was made by BRS-Autodesigns and styled after the RE
Amemiya Super GT race car. Seibon Doors and Hatch, RE Amemiya Wing, APR
mirrors and canards. Greddy racing Ti cat back Exhaust with Pettit Racing mid and down pipe.
J-Line Wheels. All work done by Luis Sutton, Robert Mealey, Cameron Worth,
Luis Seijo, Mike Lowe.
The Zero F**ks Given RX7 - /TUNED
Would you drive a car built by a teenager in his parents driveway with no
safety features whatsoever? We did, and now we'll tell you why this ugly
RX7 is so brilliant.
20B RX-7 vs GTR R35 - First run in RX-7
Drag race between brothers gets intense as Rob and Kevin duke it out on the
Rob recent purchased a 20b RX-7 and has never driven it on the strip. Will
he beat the 504 HP 2010 GTR?
Filming style courtesy of ABC's The Bachelorette. lol