Axial Wraith VXL boggin at Crawler World Oct 26, 2011
Wraith Backyard TTC course Rocks Mudpit revised with 100lbs of clay Super Swampers 120mm Hot Racing shocks Axial Wraith Traxxas VXL-3s system(motor/esc) Normal gearing 16/87 48pitch Castle BEC Hot Racing knuckles and c-hubs Hot Racing 120mm shocks Toward Pro MG946R servo @ 7.2 volts Kimbrough 1/4 scale servo saver(black) or Traxxas "large" saver (white) Robinson Racing transmission gears Axial 43/13 HD differential gears RC4WD frt diff cover Vanquish rear diff cover Custom shock mounts and upper tie bars Custom straight links, 8/32 mild steel all-thread w/6mm brakeline, Traxxas Revo ends Custom length 4 link bars approx 5mm shorter front, 10mm shorter rear Custom 4 bend steering link using the XR side of knuckles and lovin' the ackerman Custom aluminum axle toobz Custom aluminum body with integrated inner fenders and 2 piece aluminum hood Custom tonneau cover made from wax coated paper, under coat, and gloss black paint JB Welded or epoxied Axial HD lockers, currently looking at solutions for the weak stock lockers May be seen running an HPI open front differential with silicone diff lock Modified stock driveshafts, dual females w/aluminum inner tube Stock plastic rear axle lock outs Stock dog bones Battery in rear, 5000mah 2S or 4000mah 3S Weighs approx 8lbs with the CAC's @7.5lbs with the Hammers Wheel packages Trail set - CAC EZ locks w/Super Swampers, memory foam, no vent holes, no weight added, approx 8oz each total, installed with the "narrow" offset 11.5" from edge to edge. Crawl set - Axial 8 holes wheels with half spun hex mod :D Super Swampers, no foams, sealed with airsoft pellets, fronts weigh approx 12oz and the rears 9oz Speed set - RPM Revolvers, crawler wide offset with Proline Hammers and memory foam, 7oz fronts and 6.2oz rears.
rc tow truck bigfoot
truck rc 4x4 tow truck