Spectre Performance has come out with a probfab quick kit allowing you to easily create your own custom cold air intake.
For more information visit:
You can now find us on myspace:
HOW TO GET HP, TQ & MPG FREE
an alternate to buying an expensive c.a.i., this is a free mod. What you
do is remove the resonator in/on/outside the airbox, this in turn will
remove ANY restriction and unlike most 'cold' air intakes, this one keeps
the box that separates hot air around the engine from the cold air from
outside to be sucked up.
$0.00 Performance Upgrade - EricTheCarGuy
$0.00 Performance Upgrade - EricTheCarGuy
Yea, it's true something as simple as this can increase performance, just
make sure you don't get it too tight and have fun impressing your friends
with this cool little trick.
Click below and Stay Dirty
Visit me at EricTheCarGuy.com
Visit EricTheCarGuy Forum
Visit my Facebook Page:
Due to factors beyond the control of EricTheCarGuy, it cannot guarantee
against unauthorized modifications of this information, or improper use of
this information. EricTheCarGuy assumes no liability for property damage
or injury incurred as a result of any of the information contained in this
video. EricTheCarGuy recommends safe practices when working with power
tools, automotive lifts, lifting tools, jack stands, electrical equipment,
blunt instruments, chemicals, lubricants, or any other tools or equipment
seen or implied in this video. Due to factors beyond the control of
EricTheCarGuy, no information contained in this video shall create any
express or implied warranty or guarantee of any particular result. Any
injury, damage or loss that may result from improper use of these tools,
equipment, or the information contained in this video is the sole
responsibility of the user and not EricTheCarGuy.
How to Customize a Universal Cold Air Intake Filter System - Pep Boys
Spectre Performance demonstrates in this video how to customize a universal
cold air intake kit using parts you can find at your local neighborhood Pep
Boys. Using universal parts you can simply assemble them in any fashion to
create the look you want to make.
First we take off the existing air cleaner and install a single 4 inch
plenum. Lay the plenum where your air filter was and put it in any
direction you like. Screw on the plenum with the existing air filter nut or
a custom nut of your choice. You will need couplers that will connect the
different intake tubes together that can be turned to mold within your
engine compartment. Simply slide on the coupler to the plenum and fit
accordingly. Secure the clamp on the coupler to the ridge inside and then
you can add additional tubing for the length you desire. Remember not to
tighten the clamps too hard, because you may need to move your tubing
around until you create a final fit. Rotate and adjust as needed. Attach
your air filter to the end of the tubing. You can find inserts that go
into the filter to accommodate a 3 or 3.5 inch tube. Once you have the
final placement in place, be sure then to go back and tighten all of the
clamps to hold the filter system securely in place.
The advantages to having a custom air intake filter system located in the
front of your engine is that you can take advantage of the air stream and
receive colder air going into the intake system instead of the hot air that
your standard filter was providing. Customizing your cold air intake
system is pretty simple once you know a few simple tricks. Not only will
your new custom air intake system look great, but it will increase your
engine's overall performance.
You can see more of these great DIY'er videos from www.pepboys.com or stop
in your local Pep Boys for more information.
Short Ram vs Cold Air Intake Kits: Which to Choose? Presented by Andy's Auto Sport
1 (800) 419-1152
Andy's Auto Sport presents a video about the differences between short ram
air intakes and cold air intakes, with examples of each for easy reference.
Air intake kits offer performance by replacing the restrictive factory air
box in your vehicle with free-flowing components. From stock replacement
parts to high-performance aftermarket accessories, Andy's Auto Sport has
what you need to get the looks and power your vehicle deserves.
Please feel free to rank our video, share it, or embed it!
Cold Air Intake with Blow Off Valve - Sound Test
CPE CAI - Homemade DIY Cold Air Intake with Blow Off Valve - Mazda cx7
Engine light is on for stuck EGR valve. fixed using seafoam.
Melted out the stock MAF socket with a soldering iron.
Purchased K&N air filter and placed it on the end of the tube.
just that easy.
PriorToImpact Prior To Impact
Cold Air Intake - Explained
How cold air intakes work. How do cold air intakes increase horsepower? What is the
relationship between air temperature and horsepower? This video
explains the theory behind cold air intakes.
Note: This video assumes pressure remains constant for all situations, and
that air density is strictly dependent on air temperature. This video also
assumes air is dry, containing 79% nitrogen and 21% oxygen.
Please feel free to rate, comment, and subscribe!
And don't forget to check out my Facebook page:
Also check out my official website: Make suggestions, participate in
forums, enter for Car of the Month, learn through logically ordered
lessons, read FAQs, and plan your future!
NEW VIDEO EVERY WEDNESDAY!
Ford F150 5.4L Truck & Expedition Cold Air Intake (Review)
American designed and built Cold air intake systems for 2004-08 5.4L F150
series trucks and Ford Expedition models delivers 8-10 horsepower along with
improved fuel economy. Part # 1744
All 04-08 Ford F150 5.4L Truck and Expedition cold air kits are designed
with a high flowing CNC mandrel bent chrome inlet tube and cotton element
performance conical filter encased in the black powder coated filter
shield. All BBK performance parts are designed and manufactured in the USA
For even more performance we recommend the installation of a BBK Power Plus
throttle body to increase air flow - click link for more information
Eps 25 DIY cold air intake install
make your own cold air intake for around $60 instead of paying around $300