Custom 1972 Pontiac Firebird - V8 sound!
Jamboolio records a fully restored 1972 Pontiac Firebird with the 350 cid
5.7L V8 engine and a stunning new paint job.
The monstrous hood scoops and huge air vents added to the all black
exterior makes it a very bad-ass looking muscle car beast! The Exhaust sound is pretty awesome too! Enjoy.
Location: 'Helsinki Cruising Night'
Helsinki, Finland 2013
- 800 HP Dodge Charger 605 cid / 9.9 L - The most bad-ass American muscle
car ever?! http://youtu.be/ZYoo5zZD4lk
- EXTREMELY LOUD Supercharged Corvette C6 Z06 http://youtu.be/yLXmSkqOi6E
- 1970 Dodge Challenger R/T 440 Magnum - amazing V8 and Exhaust sound! http://youtu.be/uP7yw40HF5o
Watch in High Definition (1080p HD).
RATE, COMMENT & SUBSCRIBE!
SUBSCRIBE for more upcoming automotive videos:
Follow Jamboolio on TWITTER:
Sound Testing: Flowmasters 8 Hottest Mufflers
We test 8 of Flowmasters most popular mufflers for street cars to muscle
cars to full blown race cars! From mild to aggressive, find out which
muffler is right for your car and get that classic Flowmaster sound.
glasspack vs flowmaster
this is a comparison of the two on an '87 firebird with a 305. the
flowmaster has a harmonized sound because of the dual outlet so try to keep
that in mind. unfortunately im stupid and dont know the brand of glasspack
nor the series of muffler.
Comp Cams Thumpr Cam With Flowmaster 80 Series
New Exhaust and front grills coming
soon!**Cam Information Below**
The newest line of camshafts from Comp Cams is the "Thumpr". This line of
retro-fit hydraulic roller and hydraulic flat tappet cams is designed for
use in engines that originally used a flat tappet cam. It will give a
significant increase in horsepower over an identical
flat tappet grind. The "Thumpr" uses lobe profiles and grind
characteristics that produce an early valve opening, long Exhaust duration, and a generous overlap to give
the engine a powerful and hard hitting Exhaust note and a rough idle without
sacrificing power output or streetability.
RPM Range: 2,000 to 5,800 rpm
Duration @ .050" lift: 227/241 (int/exh)
Valve lift: .479/.465 (int/exh)
Ideal for high performance street use, stock converter ok, best with
2000+ converter and gears, choppy, thumping idle.
Comp Cams 12-600-4
• Muscle car sound is back
• Hard hitting, lumpy idle
• Excellent throttle response and "streetability"
• Significant horsepower increase
and a stock y-pipe with no converter.
some others put into the engine too.
1987 Trans Am 355ci TPI first drive...
This is a short vid of my 87 Trans Am after I finally got the engine
running right. Before it would not idle but I figured out I had the valve
spring rocker arms tightened too tight. It is a 355ci small block chevy
with crappy truck heads along with a LT1 cam and a Tuned Port Injection
intake manifold. Exhaust is
Flowmaster, but I do not know what series. When the car is near the
phone/camera, you can hear the loud hissing coming from the engine sucking
in all that air! This is the first drive since I removed the 305 so I am
still getting used to the pedal with power! The smoke is from the
injectors running a bit rich since I had the fuel pressure turned up a bit
high. This is also a good vid to see my sequential tailights!
1988 Trans Am GTA, Magnaflow / Edelbrock Crossbreed Exhaust
This is my '88 Trans Am GTA that I just got through completing the Exhaust upgrades on. It's a factory L98 TPI
car, with headers, custom y-pipe, and Edelbrock cat-back piping with a
Magnaflow muffler welded in.