Turbo V8 swapped Rx7.flv
A video some random person in a wrx took of me driving down the highway and posted on the internet then I found it.
1986 third gen Trans Am turbocharged 5.3 LM7 LSx runs
Couple WOT runs in my 1986 trans. Setup is a 2005 5.3 stock bottom end, 317 heads, LS6 cam and valvesprings, LS6 intake manifold, and custom fabbed turbo setup with a turbonetics 76mm ball bearing turebo. Currently running 5 PSI but engine will take 12-14 PSI. Car has a T56 tranny with a textralia clutch as well.
LSx Typhoon Quarter Mile Run
9/5/2011 Infineon Raceway
Ran an 11.61@120, 1.839 60', 12psi. We were on street tires and were spinning pretty bad off the line.
Quick run down....
5.3/4l80e, tc78 turbo, 3000 stall, 18" rims on street tires, c6 z06 brakes, no weight reduction.
More Details here:
Trans AM FM MPT70 5.3L LM7 528hp 491tq (1BAD LS1)
This is my current setup, Front mount Master Power T70/.96AR turbo, Pullout 5.3L LM7 8.5:1 compression, 317 heads, 02 ZO6 Cam, COMP 7.425 pushrods, I Custom Fabbed the Merge pipe and down pipe, FMIC, 9" 370 gears, VIG 3600, Tuned by me (1BAD_LS1 TUNING SOULTIONS)......
It made 528HP and 491TQ with 22* timing, 14psi, 11.5afr at only 5600RPM (trans was slipping like a mofo) it will make 600hp + easy! Those are the best numbers the car put down because the trans/converter kept getting worse and worse....
Those numbers were also made with a high stall auto Vig 3600 with a cracked hub, a stock slipping 460e, and a 9" with 3.70's !!!!!!!!! I need a better tranny/stall/gears because what i am running in not turbo friendly at all!
UPDATE... installed a th400 trans, new rear gears, and a few more psi!!!! no Dyno numbers but i would bet the car would put down close to 700HP!
5.3 s10 vs 6.0 Turbo Silverado
silverado has a 6.0 with with a small 67mm front mount running 9lbs of Boost, methanol, ss3200 yank converter, blower cam
s10 has a 5.3 with a tr220 cam, ss3600 yank, stock 862 heads, tune
Check out more at http://lsxs10.yolasite.com/