Drag Racing 1/4 Mile times 0-60 Dyno Fast Cars Muscle Cars

Replace cabin/AC filter for honda accord 2003-2011

how to replace a cabin filter or AC filter for honda accord v4/v6 from 2003 to recent model 2012


 


More Videos...


How To Pull Honda Codes Without a Scanner -EricTheCarGuy
Link to code explanations: http://www.ericthecarguy.com/hondaacura-obd-i-codes-1992-1995 Honda ABS Codes 1994-1997: http://www.ericthecarguy.com/honda-abs-codes-1994-to-1997 Honda ABS Codes 1998 and up: http://www.ericthecarguy.com/honda-abs-codes-1998-to-now Visit me at: http://www.ericthecarguy.com/ Discussion about this Video: http://www.ericthecarguy.com/component/kunena/18-The-EricTheCarGuy-Video-Fo rum/34741-Pulling-Honda-Codes-Without-a-Scanner?Itemid=0#34741 I feel like I should have made this video a while ago but the opportunity never came up. Since I had this RL in my shop that had a check engine light AND an ABS light I thought it was a perfect opportunity to put this video together. I get asked all the time about my 'special tool' and it's really nothing more than a Honda 2 pin connector with the input wires soldered together. These connectors might be harder to find than you think but if you run across a junk honda and one of these is on the harness grab it. Even if you don't have the tool a paper clip or piece of wire will do the exact same thing so don't sweat it if you don't have the tool because shorting the connector is all you need to do. I hope you find this video helpful. Stay dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.





'04 Honda Accord A/C cabin filter replacement
easy tutorial to change cabin filter





Cabin air filter replacement- Honda Accord
Purchase this filter at http://www.filterheads.com/AQ1007 AQ1007 fits Acura CL 01-03, TL 99-03 and Honda Accord 98-02. The model shown is a 1999 Honda Accord, but installation is similar on the other models.





2003-2007 Honda Accord AUX Plug Install - First Time!
I used the PIE AUX plug I got off Amazon and the Clarion AUX plug which had thick cables and gold tips for the best quality. I did notice if you have the car on with the AUX playing and you turn the key to the position right before pulling the key out, the volume goes very quiet. Just turn the key to off and then turn it back to AUX and the volume goes back to normal. PIE Adapter http://www.amazon.com/PIE-HON03-Aux-Honda-Auxillary-Interface/dp/B004M5EMQM /ref=sr_1_1?s=electronics&ie=UTF8&qid=1355702502&sr=1-1&keywords=pie+aux3 Clarion Plug http://www.amazon.com/Clarion-CCAAUX-Mini-Jack-Extension-Integrated/dp/B001 44I3ZK





Honda Oil Change - The Factory Difference
Do you want to know what happens when you bring your Honda in for an oil change? Brandon Reed, service technician of SanTan Honda Superstore, tells us what to expect when getting an oil change and the benefits of using a factory filter. Please visit us online at https://santanhonda.com or call us (480) 285-2800





How to Replace Honda Captive Rotors - EricTheCarGuy
This was a request from a while ago and I'm happy to get to it now. I did a bunch of video on this car (1990 Honda Accord LX) and have lots more to show you in future episodes. Honda captive rotors are a pain to say the least. For the most part you can take them somewhere that is equipped with an on-the-car brake lathe to have them machined when they get warped but in this cast they were too thin and damaged for machining and needed to be replaced. I have to admit that this job does not always go this easy, it usually requires a lot more effort, some pain, and perhaps a little blood to accomplish but I guess it was trying to behave for the camera on this day. Astute views may notice that I switched sides for the video, that's because I ended up replacing the wheel bearing on the side that I started with and did the disassembly a bit differently as a result, good eye if you spotted that. I'll be posting more videos from this car in future weeks so keep an eye out if you have one of these that needs some work. --- Click below and Stay Dirty Visit me at EricTheCarGuy.com http://ericthecarguy.com/ Visit EricTheCarGuy Forum http://www.ericthecarguy.com/forum/default.aspx Visit my Facebook Page: http://www.facebook.com/EricTheCarGuy --- Stay dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.





Cabin Air Filter Honda Accord 2000 SE
Time spent 1.5 hours /cost $18.00 USD You can do it your self and save money. On a dealer shop the labor will cost between $80 to $120 Thanks for watching.





How To Solve An Engine Overheat Condition - EricTheCarGuy
How To Solve An Engine Overheat Condition - EricTheCarGuy http://www.ericthecarguy.com/ I actually had fun putting this one together for you since the car I was working on didn't cooperate it made it so I could show you real world problems as they happened, very cool. I think this one is pretty self explanatory so I will save a long explanation. In case you missed the link to the "Bleeding a Cooling System" here is a link for you --- Click below and Stay Dirty Visit me at EricTheCarGuy.com http://ericthecarguy.com/ Visit EricTheCarGuy Forum http://www.ericthecarguy.com/forum/default.aspx Visit my Facebook Page: http://www.facebook.com/EricTheCarGuy --- Stay dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.





Honda Accord VTEC timing belt and water pump Honda Accord VTEC High Detail How to
You can buy a quality belt and water pump online here http://www.amazon.com/gp/product/B001NYE26U/ref=as_li_qf_sp_asin_il_tl?ie=U TF8&camp=1789&creative=9325&creativeASIN=B001NYE26U&linkCode=as2&tag=httpww wyou00f-20 Special thanks to Spanky for filming this video for me. : ) My last Honda Accord video was very well viewed, but lacking in good sound, stability, and lighting so I did another one with some help. Enjoy High Detail How to do a timing belt and water pump Honda Accord VTEC





Quick Tip-Throttle Cleaning - EricTheCarGuy
This one goes out to BowlingBallOut who posted a question about a sticky throttle on his Saturn. It was a great question so I decided to make this video in response to it. There are many different configurations of throttle assemblies but for the most part if you have a throttle that is sticking you might be able to fix it using the procedures in this video. I am aware you may not able to purchase spray throttle cleaner in some states now but I'm sure they have some alternative available at your local parts store. One very important note here is that if you have a drive by wire throttle (DBW), then I do NOT recommend this procedure. If you perform this procedure on a DBW throttle body you may need to have the throttle reset in order to get your engine to idle or even start. I only recommend this procedure if you're trying to correct a problem with a sticking throttle. If you have idle problems, I recommend you check out this article on my website. http://www.ericthecarguy.com/faq/solving-automotive-idle-problems The best place for answers to your automotive questions: http://www.ericthecarguy.com BowlingBalOutl's channel http://www.youtube.com/user/bowlingballout Facebook: https://www.facebook.com/EricTheCarGuy?fref=ts Twitter: https://twitter.com/EricTheCarGuy Google+: https://plus.google.com/100195180196698058780/posts Information on Premium Membership: https://www.ericthecarguy.com/premium-content-streaming-etcg-content Stay dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.





Honda News - CIVIC TYPE R NEWS - HONDA HRV TURBO - 2015 HONDA FIT FAILS
Honda News. This week new info about the Honda Civic type R, 2015 Honda Fit fails but then passes the IIHS crash test ratings, New Honda turbo info on the Honda HRV in Europe. Honda goes to Detroit to show off their new v2v technology. I talk about my trip schedule to Nashville for Import Alliance in Oct, Las Vegas to attend SEMA, Then its off to The Netherlands and UK for Honda Fest. #Honda #HondaLove HondaPro Jasons contact info jason@hondaprojason.com My Wardrobe supplied by http://www.eeffectapparel.com/ For more information on HOnda please visit http://www.honda.com/ Thank You http://www.hondasacuras.com/ for this weeks source for Honda news and for letting me use your photos. Hybrid Racing parts and apparel http://www.hybrid-racing.com/ Honda poster winners Scott Marlin John Larsen proraceer07 Zane Dee Bigron Thank You all for your Honda love and support. The views and expressions in this video are HondaPro Jasons and do not express the views of Honda motor co.





Cabin air filter replacement- Honda CR-V
Purchase this filter at: http://www.filterheads.com/AQ1058 AQ1058 This filter fits Acura CSX 2007-2010, MDX 2007-2010, RDX 2007-2011, RL 2005-2011, TL 2004-2010, TSX 2004-2010, ZDX 2010, Accord 2003-2009, Accord Crosstour 2010, Civic 2006-2009, CR-V 2006-2009, Odyssey 2005-2010, Pilot 2009-2011 and Ridgeline 2006-2011. The model shown in this video is a 2008 Honda CR-V, but installation is similar on the other models.





Changing the in cabin filter on a 2008 Honda CR-V
I show you how to change your in cabin filter on your 08 Honda CRV. its easy and wil only take 1 minute. Dont pay 60 to 100 bux for a dealer to do it. If you have any questions feel free to ask. There are easier than prior CRV SUV'S





2014 Honda Accord Touring Start Up and Review 3.5 L V6
Like us on Facebook! https://www.facebook.com/pages/Camerons-Car-Reviews/349462695066112?ref=hl Camerons Car Reviews Score: 5/5 Powertrain Options: 2.4 L 4-Cylinder or a 3.5 L V6 with a 6-Speed Manual or Automatic FWD Features: Leather Seats, Powered Seats, Navigation, Lane Departure Warning, Honda LaneWatch, Backup Camera, Sunroof, Heated Seats, Power Outlet(s), USB Port(s), AUX Input, Dual Zone Climate Control, Bluetooth Streaming Audio/Hands Free Calling, Tilt and Telescopic Steering Wheel, LED Headlights w/LED DRL's, Garage Home Link, Auto Dimming Rearview Mirror, Heated Exterior Mirrors, Push Button Start with Smart Key Access Engine & Performance BASE ENGINE SIZE 3.5 L CAM TYPE Single overhead cam (SOHC) CYLINDERS V6 VALVES 24 VALVE TIMING Variable TORQUE 252 ft-lbs. @ 4900 rpm horsepower 278 hp @ 6200 rpm TURNING CIRCLE 38.1 ft. Fuel RANGE IN MILES (CTY/HWY) 361.2/584.8 mi. EPA MILEAGE EST. (CTY/HWY) 21/34 mpg





HOW TO CHANGE THE AIR CABIN FILTER IN A 2010 HONDA ACCORD





Which car is faster? Which Car is Faster?




Similar 1/4 mile timeslips to browse:

1997 Honda Accord SiR: 11.741 @ 117.400
Scott DiLonardo, Engine: F20b DOHC stroked to 2.2 L, Turbos: T3/T04 Tires: Yokohama Parada spec 2 215/40-ZR 17 in front 225/4


1995 Honda Accord EX: 13.019 @ 112.371
James, Engine: H22A, Supercharger: N/A Turbos: N/A Tires: Winstar


2003 Honda Accord EX V6 6 Speed: 13.107 @ 107.700
Paul, Engine: J30A4 3.0L V6, Tires: 205/55/16 Triangle Brand Summer Tires


1993 Honda Accord LX: 13.130 @ 104.000
Rick James, Engine: F22, Supercharger: none Turbos: none Tires: 215 25 21


1994 Honda Accord EX 4door Nitrous: 13.300 @ 106.300
Corey Bullock, Engine: 2.2 VTEC, Tires: Kumho ZRs


1999 Honda Accord EX V6 Coupe Nitrous: 13.434 @ 101.840
arnie b, Engine: 3.0, Tires: m&h slicks


1991 Honda Accord lx: 13.442 @ 103.980
john hatfield, Engine: h22a, Supercharger: na Turbos: na Tires: bfg drag radials


1990 Honda Accord lx: 13.491 @ 101.710
jonnyhonda, Engine: jdm h22a, Supercharger: none Turbos: none Tires: m/t 22/8


2006 Honda Accord EX 6spd: 13.570 @ 101.200
Bryan, Engine: J30a5, Tires: 215/55 Hankook Ventus V4


2000 Honda Accord EX: 13.643 @ 111.390
Jason Hart, Engine: F23A1, Turbos: Garrett T3/T4 57 trim Tires: 225/40/18 Continental Ext Cont DW


2003 Honda Accord EX V6 6 speed Gutted Interior: 13.653 @ 104.110
Paul, Engine: J30A4, Tires: 205/55/16 Triangle Summer Tires


1992 Honda Accord : 13.800 @ 105.000
Brett Shanley, Engine: h22,


1994 Honda Accord Turbo: 13.915 @ 102.780
Tory Russell, Engine: h22a, Turbos: t3/04e Tires: toyo t1s


1993 Honda Accord se turbo: 13.943 @ 100.000
jerrod, Engine: f22a6, Turbos: 1 t3 60mm


1990 Honda Accord ex: 13.950 @ 101.350
Josh Taylor, Engine: JDM F22B DOHC, Turbos: t3/t4 godspeed Tires: drag radials


2005 Honda Accord EX: 13.988 @ 100.000
Igor Guzenko, Engine: K24A3/ 2.4, Supercharger: no Turbos: Garret GT28 Tires: Bridgestone Potenza 235/40


2001 Honda Accord : 14.120 @ 102.350
Nashmy,johnn, Engine: 3.0L V6, Tires: Toyo proxes T1-S-245/40ZR18


2003 Honda Accord EX coupe: 14.144 @ 99.760
John Rankin, Engine: 3.0 V6, Tires: Toyo T1R 215/50-R17


2008 Honda Accord Coupe EX-L V6: 14.210 @ 102.060
NA, Engine: SOHC 24 valve V6,


1997 Honda Accord : 14.216 @ 97.030
Jason Harmon, Engine: 2.2L 4 cyl, Tires: crap tires


 


©2014 DragTimes - Disclaimer