Drag Racing 1/4 Mile times 0-60 Dyno Fast Cars Muscle Cars

THR 347 Mustang Stroker 7000 RPM Dyno Pull 475 RWHP All Motor N/A

**FOR SALE** $25k THR Mustang Performance 550 HP Solid Roller 347 Stroker All Motor For Sale $25k 10 sec all motor Mustang Coupe THR Texas Hot Rods Call for more details (915) 449-6224 Brian THR Custom Solid Roller 347 Stroker Probe Dome 12.5:1 Pistons Probe 4340 Forged Ultralight I-Beam Rods Probe 4340 Forged Steel Stroker Crankshaft Edelbrock Victor Jr Single Plane Intake ProSystems Custom Carb 780 CFM Milodon Billet Main Cap Conversion Milodon Billet Main Support Girdle All ARP Bolts / ARP Head Studs Balanced & BluePrinted Jay Allen Camshaft Innovations Custom Solid Roller Billet Cam AFR Heads Solid Roller Springs to .750 lift .731/.705 Solid Roller Camshaft Link Bar Solid Roller Lifters (Comp Cams) FacePlated Tremec Trans / Ram Stage III Clutch Kit Aeromotive Braided Line Fuel System Aerospace Components Billet Drag Brakes Aerospace Components Billet Evac Pump MSD Ignition, MSD Billet Distributor, MSD Coil Taylor 10 mm 409 Race Wires CSR Elec Water Pump Weld Racing Pro Magnum Wheels/MT ET STREET Tires Moser Spool & Axles 4.56 Gears / Moser Billet Girdle THR Custom Basket Style Cage & Subframes 473 RWHP / 435 RWTQ on Mustang Dyno ALL MOTOR PASS


 


More Videos...


THR_347_08 005.avi
THR Mustang Performance 92 Notch FOR SALE $25k 550 HP All Motor THR 347 Solid Roller 7800 RPM Stroker THR Custom Cage & Suspension Just got it running again and out on the street for a couple roll on's to break in the clutch. Nothing crazy as we're trying not rip on it yet even though we barely refrain from sticking the throttle and grabbing gears at 7500+ RPMs. She's on the Dyno tonight so I'll try to get up so more vids. So far it's at 471 RWHP & 432 RWTQ at only 6300 RPM! This new 347 Solid Roller with Jay's Custom Cam Innovations grind is absolutely SICK! Look for a couple more vids up this weekend and maybe some track times next week!





THR_347_08 003.avi
THR Mustang Performance 92 Notch FOR SALE $25k 550 HP All Motor THR 347 Solid Roller 7800 RPM Stroker THR Custom Cage & Suspension Just got it running again and out on the street for a couple roll on's to break in the clutch. Nothing crazy as we're trying not rip on it yet even though we barely refrain from sticking the throttle and grabbing gears at 7500+ RPMs. She's on the Dyno tonight so I'll try to get up so more vids. So far it's at 471 RWHP & 432 RWTQ at only 6300 RPM! This new 347 Solid Roller with Jay's Custom Cam Innovations grind is absolutely SICK! Look for a couple more vids up this weekend and maybe some track times next week!





THR_347_08 004.avi
THR Mustang Performance 92 Notch FOR SALE $25k 550 HP All Motor THR 347 Solid Roller 7800 RPM Stroker THR Custom Cage & Suspension Just got it running again and out on the street for a couple roll on's to break in the clutch. Nothing crazy as we're trying not rip on it yet even though we barely refrain from sticking the throttle and grabbing gears at 7500+ RPMs. She's on the Dyno tonight so I'll try to get up so more vids. So far it's at 471 RWHP & 432 RWTQ at only 6300 RPM! This new 347 Solid Roller with Jay's Custom Cam Innovations grind is absolutely SICK! Look for a couple more vids up this weekend and maybe some track times next week!





THR 331 Mustang Stroker 10 Sec All Motor Street Race Car THR
THR 331 AFR Headed Stroker Small Block making a quarter mile simulation pass on our in house THR MD Dyno. 10.78 @ 125 mph. Hi Compression 331 stroker, AFM Custom Cam, Ported AFR Heads, Long Tubes, Elec Water Pump, 4.30 Spooled 8.8 with Moser Axles and Gears, Tremek TKO500 Trans, Alum D Shaft, Caged Coupe.





Ford 347 450HP Stroker Engine "LOUD"
You can view this engine package at the following link: http://www.proformanceunlimited.com/specs/343_350dropAL.html Be sure to "like" us on Facebook: http://www.facebook.com/customcrateengines?v=wall





THR 357 inch Windsor Bullet Racing Copper Coupe
THR Texas Hot Rods 357 inch Windsor Bullet Racing engine in our newest Project Mustang CopperHead Coupe II. Check out the nasty little motor rolling around THR as it takes the first test drive.





THR 357 Bullet Swap CopperHead Coupe Project
Short Idling Vid of our latest project stang CopperHead Coupe with one of our Killer THR 357 inch Bullet Windsors. Race Car built and fabricated by THR.





N/A 347 Mustang with Anderson N-111 cam.
Here's a video of my good friend Travis's N/A 347" stock block LX. He just got the car up and running earlier this year and is starting to get it figured out. It has AFR 185 heads with a little port work, Anderson N-111 cam, and a Vic.Jr intake. I dont know the carb size but I dont think it's much more than a 650cfm. Trans is a Face plated TKO-600 and the car has a 4.56 rear gear. He was running on a 28x10 e.t. drag but they were wore out so even a 4500rpm launch rpm would still blow them off. This was a 10.8@129 pass with a 1.7x 60' time. Car weight is right around 2950lbs with driver. It'll go 10.40's with a new tire.





347 Stroker Motor Comes Alive!
347 FordStroker.com DYI Shortblock gets fired up after a long build





MUSATNG 5.1 STROKER BUILD AND DYNO
1998 Mustang GT COBRA TREMEC TRANS 5.1 STROKER COAST HIGH PERFORMANCE BUILD Dyno





331 stroker Foxbody
Engine and drivetrain -331 stroker -forged Scat Crank -Forged H-Beam Scat Rods -Forged JE pistons -chromemoly Piston Rings -Trick Flow High Port Heads -ARP head and main bolts -trick flow push rods -trick flow 1.6 roller rockers -ford racing valve covers -Holley 650 dbl pumper mechanical -Flamethrower Distributer -Molley Fuel Pressure regulator -Victor Jr. Manifold -3" BeCool Radiator -stage 3 spec clutch -T-5 transmission -3:73 rear end gear Exhaust -ford racing 1 5/8' long tube -2.5" x-pipe and back -Magnaflow Mufflers Suspension -Rear summit racing springs -Hotchkiss upper/lower rear control arms -welded sub-frame connectors -UPR tubular K-Member -UPR tubular a-arms -UPR Coil over kit -UPR Caster Camber Plates Interior -grey seats -New Black carper -CD player with Ipod adapter -12" subwoofer -5" stewert warner Tachometer -2-5/8" stewert warner Temp gauge -2-5/8" stewert warner Oil pressure gauge -empty 2-5/8" gauge kit for 2 gauges -heater works Exterior -New White Paintjob -Stalker Front bumper -SVO cobra Hood -17" white Cobra R wheels -new door handles -new locks -17/245/35 front tires -17/270/35 rear tires





THR 347 Mustang Stroker 10 Sec All Motor Street Race Car THR
A quick walk around of another killer THR Stang with a potent THR 347 Stroker.





408 Windsor Stroker 780 hp 6600 rpm run
Windsor stroker in square body 83 Ranger





1989 Mustang LX.....built 347 stroker
Playing around in the Mustang





WHEELSTANDING "BLOWN" SMART CAR OUTRUNS MUSTANGS!!
For licensing/usage please contact: licensing(at)jukinmediadotcom...'08 Blown Smart Car with a 1.5 Liter Toyota Paseo Engine~Sprintex Blower~ 28lbs Boost~3sp Auto trans pulls wild wheelstand on first run of 13.90@80.99mph and lifts as the Shelby Mustang avoids being embarrassed with a 13.67@110.64. In the second run the Smart Car keeps the wheels closer to the track and puts the modified Mustang on the trailer with a 12.53@107.39 vs the Mustangs 13.21@110.36. Test n Tune Rt 66 Friday Night 5-23-14




Which car is faster? Which Car is Faster?





Similar 1/4 mile timeslips to browse:

1969 Ford Mustang : 6.860 @ 204.000
Bill Sexton, Engine: 712ci Pontiac built by Sonny Leonard,


1969 Ford Mustang : 7.170 @ 177.000
CARL EPPLE, Engine: 572CI SVO 460, Tires: 33X10.5W MICKY THOMP


1969 Ford Mustang Mach 1: 7.670 @ 178.210
Phil Manquen - Walt Drakeford, Engine: 602 CI, Tires: 10.5


1987 Ford Mustang Turbo: 7.816 @ 180.800
Brad, Engine: 347CI, Turbos: Precision 98.5mm Tires: 28 x 10.5 MTs


1995 Ford Mustang Cobra: 7.889 @ 197.360
Jim Mills, Engine: 427 Windsor, Turbos: Twin GT47-88 Tires: M/T 325/50/15 Radials


2007 Ford Mustang Super GT500 Twin Turbo: 7.890 @ 175.220
EV, Engine: Built 5.4L Aluminum Engine, Turbos: Twin 67mm Precision Turbos


1989 Ford Mustang lx: 7.930 @ 172.300
jorge fretts, Engine: 598, Tires: 33x10.5w


1989 Ford Mustang LX Hatchback 10.5 tire: 8.000 @ 170.000
Marshall Hancock, Engine: 572 ci, Supercharger: n/a Turbos: n/a Tires: M/T


1986 Ford Mustang THE STAMPEEDE BANDIT: 8.013 @ 170.033
Larry Gotreaux, Engine: BBF-ELIMINATOR-460-605ci, by Tims Engines, Denham Springs,, Supercharger: N/A Turbos: N/A Tires: 27x15 GY & 33.5x17x15W-GY-D1


1993 Ford Mustang LX: 8.390 @ 167.870
Lee Howie, Engine: Bennett, Turbos: 1 Precision PT90 Tires: DOT


1987 Ford Mustang coupe: 8.400 @ 162.370
Todd, Engine: 385ci,


1989 Ford Mustang coupe: 8.420 @ 167.000
Ryan Ellington, Engine: sbc 434, Tires: mt 275/60/15 drag radial


1991 Ford Mustang GT: 8.520 @ 172.700
PRO LARRY, Engine: 351W, Supercharger: NA Turbos: NA Tires: NA


1990 Ford Mustang GT: 8.527 @ 172.300
PRO LARRY AND BRANDON G.T, Engine: 351W, Tires: 10.5 SLICK'S


1993 Ford Mustang Cobra 363 Nitrous: 8.541 @ 152.870
CJ Williams, Engine: 363,


2006 Ford Mustang GT: 8.579 @ 158.780
Paul Fercho, Engine: 572 CID big block ford, Supercharger: none Turbos: none Tires: M/T 29.5X10.5WX15 Slicks


1985 Ford Mustang lx: 8.600 @ 159.000
mike pritchard, Engine: 537ci, Tires: 30x13.50 et streets


2005 Ford Mustang GT 281 CI 80mm Turbo: 8.720 @ 155.000
Mark , Engine: 281 CI, Turbos: 80mm


1990 Ford Mustang LX Coupe: 8.780 @ 154.000
Clint Lynch, Engine: 418 windsor, Tires: 28x10.5


1991 Ford Mustang Turbo: 8.800 @ 161.000
Mike, Engine: 306CI, Turbos: Air Research 91mm Tires: 28X13.5X15 ET STREETS.


 


©2014 DragTimes - Disclaimer