426 Hemi .mov
426 Hemi. New stroker SRT8 platform. RLD CNC intake manifold and heads.
Forged pistons and rotating assembly. Piston oilers in place. All Chrysler
factory parts modified. Stock Chrysler parts include intake manifold,
injectors, heads, valves, lifters, block, sheet metal, water pump and Exhaust manifolds. Custom aftermarket
900hp 1972 Dodge Challenger OO...OO
~ Engine = 1977 440 out of an RV .
~ 440 block is bored .030 over to 4.350" ..
~ Stroked to 500 cubic inches using 4.15" stroke..
~ 6.760" I-Beam rods with ARP 12pt cap bolts..
~ 1/2 inch main girdle integrated with BCR billet main caps..
~ ARP studs with 12pt nuts..
~ Ross Racing billet pistons, dished - 32cc's for a 8.7:1 compression ratio
~ Edelbrock Performer RPM Heads with 84cc chambers...
~ Comp Cams Hydraulic Roller Cam .550 lift with 214 degrees lobe
~ Custom built blow-thru Holley carb with Boost referenced fuel pressure regulator.
~ 1000 gph fuel pump.
~ Methanol Injection
~ F1 Procharger @ ? PSI
~ Currently revs to 6,500 rpm..
~ MSD 6-BTM
Wheels = Vintage Wheel Works V48 - 17 X 8 Front. . . 17 X 12 Rear
Tires = Nitto NTO1 245/45/17 Fronts with 315/35/17 Rears..
Brakes = Wilwood 13inch cross/drilled slotted rotors ... 4 piston calipers
front & rear..
Transmission= Rebuilt Torqueflight A-727 with Kevlar clutches... and
retuned front + rear shift bands...
Suspension mods are coming soon ///
Feel free to argue with the comments
Ask any questions ALWAYS
Driver: Will G.
Owner Will G.
The horse IS a Mustang
Technology Revew: The 2012 6.4-Liter HEMI SRT V8 engine exposed
( http://www.TFLcar.com ) The 2012 6.4-Liter HEMI SRT V8 engine is the
monster power plant at the heart of the all new Charger, Challenger, 300,
and Jeep Grand Cherokee SRT8 cars. See how the new 6.4L HEMI produced 470
HP in this Insider Interview with Gary Rogers, the new engines Chrysler
528 HEMI Start Up On Engine Test Stand
My uncle Cal breaking in the 528 Hemi before it gets dropped into a 1971
Plymouth Scamp race car. Sorry about the turning of the frame during the
video, my camera auto turns when I turn the camera. The video will
definitely make up for that! Enjoy!!
2006 Dodge Magnum SRT-8 426 Hemi Stroker HoP Racing CMR Dyno
My car has the first 426 Hemi in the world, built by inertia
motorsports...but it has never been properly tuned. This was the first
rough pulls on the car as it was finally getting some Diablo CMR tuning
love. There were very good gains made by the end of the day. HoP Racing in
Huntington Beach, Ca. did an awesome job on getting my car's drivablity and
power closer to where they need to be.